| 前のトピックへ :: 次のトピックへ |
| 作成者 |
メッセージ |
themoleman342
 登録日: 2007年10月21日 投稿: 2190 所在地: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 投稿日時: 水 7月 09, 2008 5:55 pm 件名: Zenit B upgrade project |
|
 投稿日時: 水 7月 09, 2008 5:55 pm 件名: Zenit B upgrade project |
|
|
themoleman342 wrote:
I know most people in this forum are over the Zenit E-series and prefer either the spotmatics, fujis, prakticas, or any of the other various metal SLRs from the 70s but I figured I'd share this anyway. For awhile now I've been slowing upgrading my Zenit B to be more reliable in the field (re-lubing, painting internals flat black, re-sealing around prism/back, replacing ground-glass) so I'm always looking for new things to do. Zenits take quite a bit of flak for having dark viewfinders so I was hoping to devise a workable solution. I decided to take a mathematical perspective and break-out the middle-school geometry.
The average Zenit mirror has a surface area of roughly 672 mm sq (Top being about 28mm, side 26mm, and each cut away having a base of 16mm height of 3.5mm = (28mmx26mm)- 2((1/2)(16mmx3.5mm)) = 672 mm sq. I noticed that the mirror housing actually allows for a square mirror with the dimensions of around 31mm x 26mm which is 806mm sq. (there is quite a bit of unused space around the original one) So now subtract 672mm sq from 806mm sq which equals 134mm. Now divide 134mm by 672mm. You come up with .199 which is 19.9%. Which actually means that there is about a 20% gain worth of surface area over the older mirror. I have unused front surface mirror of the same thickness that I used to replace my ikoflex mirror with. So I was going to cut from that.
Does anyone have any thoughts? I'd rather not get back answers to the effect of "just buy a spotmatic" but I would really love and appreciate other insights or advice. Thanks!
~Marc |
|
| トップへ戻る |
|
 |
F16SUNSHINE
 登録日: 2007年8月20日 投稿: 5486 所在地: Left Coast
Expire: 2011-11-18
|
 投稿日時: 水 7月 09, 2008 6:30 pm 件名: |
|
 投稿日時: 水 7月 09, 2008 6:30 pm 件名: |
|
|
F16SUNSHINE wrote:
This type of ingenuity always is impressive to me. I can think of a couple problems that could pop up. The obvious one is interference with rear elements of WA lenses. The second is maybe more abstract but could surface maybe down the road. If the mechanism for lifting, baffling vibration, and returning the mirror is not robust enough maybe it could fail with a mirror that is 20% heavier  |
|
| トップへ戻る |
|
 |
themoleman342
 登録日: 2007年10月21日 投稿: 2190 所在地: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 投稿日時: 水 7月 09, 2008 8:19 pm 件名: |
|
 投稿日時: 水 7月 09, 2008 8:19 pm 件名: |
|
|
themoleman342 wrote:
The first issue that you mention should not be a problem. The new mirror will not come out any further than the original. There is a metal lip on the bottom of the housing that the original mirror sits on and this is the farthest point forward on the piece. The new mirror will sit in the exact same spot.
The second issue you raise is actually my only concern. Knowing the way the "operator" works, it either lifts it all the way or it doesn't at all. It is intimately connected with the shutter itself so the shutter won't go if the mirror doesn't lift. That I guess is for the testing stage. I know I've added a layer of new foam in front of the ground-glass to cut down on vibration so this should help in that matter. The mechanism is also quite "beefy." Zenits are known for their simple robust builds; everything is metal so I truly doubt a catastrophic failure. The original mirror is connected by two metal holders screwed into the place. They rest at the bottom at the tapered edges. These will have to be removed so therefore the weight of these will not be present any longer. I really can't say that's anything substantial but it may subtract some of from that extra weight and although a 20% increase may sound like quite a bit, it's probably no more than an extra 1/2 gram of weight.
Thanks so much for your comments!
~Marc |
|
| トップへ戻る |
|
 |
Farside
 登録日: 2007年9月1日 投稿: 6579 所在地: Ireland
Expire: 2013-12-27
|
 投稿日時: 水 7月 09, 2008 11:05 pm 件名: |
|
 投稿日時: 水 7月 09, 2008 11:05 pm 件名: |
|
|
Farside wrote:
Sounds like a worthwhile mod to try - no harm in going for it. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| トップへ戻る |
|
 |
F16SUNSHINE
 登録日: 2007年8月20日 投稿: 5486 所在地: Left Coast
Expire: 2011-11-18
|
 投稿日時: 水 7月 09, 2008 11:51 pm 件名: |
|
 投稿日時: 水 7月 09, 2008 11:51 pm 件名: |
|
|
F16SUNSHINE wrote:
Yes do go for it Marc. I would be really interested in your experience and results. The screws you remove may be enough to make it a "straight trade" on weight. I predict success  _________________ Moderator |
|
| トップへ戻る |
|
 |
peterqd
 登録日: 2007年2月28日 投稿: 7449 所在地: near High Wycombe, UK
Expire: 2014-01-04
|
 投稿日時: 木 7月 10, 2008 12:50 pm 件名: |
|
 投稿日時: 木 7月 10, 2008 12:50 pm 件名: |
|
|
peterqd wrote:
I think I might be missing something. I don't see how a larger flat mirror will increase the amount of light falling on the focus screen. The image size from the lens isn't increased, neither is the screen.
Sorry if I'm being dense!  _________________ Peter - Moderator |
|
| トップへ戻る |
|
 |
Farside
 登録日: 2007年9月1日 投稿: 6579 所在地: Ireland
Expire: 2013-12-27
|
 投稿日時: 木 7月 10, 2008 1:16 pm 件名: |
|
 投稿日時: 木 7月 10, 2008 1:16 pm 件名: |
|
|
Farside wrote:
| peterqd 氏の書き込み: |
I think I might be missing something. I don't see how a larger flat mirror will increase the amount of light falling on the focus screen. The image size from the lens isn't increased, neither is the screen.
Sorry if I'm being dense!  |
I take it he means the standard mirror doesn't actually fill the VF - or maybe the factory mirror isn't silvered very well. It might also be possible to put in a better screen. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| トップへ戻る |
|
 |
peterqd
 登録日: 2007年2月28日 投稿: 7449 所在地: near High Wycombe, UK
Expire: 2014-01-04
|
 投稿日時: 月 7月 14, 2008 1:09 pm 件名: |
|
 投稿日時: 月 7月 14, 2008 1:09 pm 件名: |
|
|
peterqd wrote:
| peterqd 氏の書き込み: |
I think I might be missing something. I don't see how a larger flat mirror will increase the amount of light falling on the focus screen. The image size from the lens isn't increased, neither is the screen.
Sorry if I'm being dense!  |
Is there an answer to this? _________________ Peter - Moderator |
|
| トップへ戻る |
|
 |
montecarlo
 登録日: 2007年4月4日 投稿: 1865 所在地: Romania
|
 投稿日時: 月 7月 14, 2008 1:54 pm 件名: |
|
 投稿日時: 月 7月 14, 2008 1:54 pm 件名: |
|
|
montecarlo wrote:
| peterqd 氏の書き込み: |
| peterqd 氏の書き込み: |
I think I might be missing something. I don't see how a larger flat mirror will increase the amount of light falling on the focus screen. The image size from the lens isn't increased, neither is the screen.
Sorry if I'm being dense!  |
Is there an answer to this? |
The Zenit's mirror is small (at my Zenit E is smaller than the Porst TL, the other M42 camera I own and around 2/3 from the Pentax P50/30 cameras or at least that seems to be the difference) and maybe increasing its surface it will reflect more light on the same focusing screen making this way the viewfinder more bright. _________________ Canonet QL17 III
Zenit E , Helios-44 58mm f:2.0 , Tair-11A 135mm f:2.8, Jupiter-9 85mm f:2.0,
Carl Zeiss Jena Flektogon 35mm f:2.4
Pentax MX, ME Super, Chinon CE4/CM4, Petri MC 28mm f:2, smc Pentax-M 50mm f:1.7, Soligor T 135mm f:2.8
Minolta X500, Tokina 28/2.8, Rokkor 50/1.7, 80-205/4.5
Nikon D90, Nikkor 35/2.0, Nikkor 50/1.8, Sigma 24/2.8, Nikkor 18-105 VR |
|
| トップへ戻る |
|
 |
themoleman342
 登録日: 2007年10月21日 投稿: 2190 所在地: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 投稿日時: 月 7月 21, 2008 5:44 pm 件名: |
|
 投稿日時: 月 7月 21, 2008 5:44 pm 件名: |
|
|
themoleman342 wrote:
Success! Yesterday I had a few hours of free time and got around to cutting and installing the new mirror. Surprisingly the viewfinders top two corners are noticeably brighter! I ascribe this to the two tapered edges of the original mirror that do not cover the entire ground-glass. All I had to do was re-adjust the mirrors angle to properly focus to infinity again. (Done by playing with screw in back of mirror). So I thank everyone for their input and interest! Now I think I'm going to put on a nice communist-red leatherette!
~Marc |
|
| トップへ戻る |
|
 |
F16SUNSHINE
 登録日: 2007年8月20日 投稿: 5486 所在地: Left Coast
Expire: 2011-11-18
|
 投稿日時: 月 7月 21, 2008 6:02 pm 件名: |
|
 投稿日時: 月 7月 21, 2008 6:02 pm 件名: |
|
|
F16SUNSHINE wrote:
Nice one Marc
I'm really glad the effort paid off. I fully support the idea of a red leatherette  |
|
| トップへ戻る |
|
 |
Farside
 登録日: 2007年9月1日 投稿: 6579 所在地: Ireland
Expire: 2013-12-27
|
 投稿日時: 火 7月 22, 2008 12:00 am 件名: |
|
 投稿日時: 火 7月 22, 2008 12:00 am 件名: |
|
|
Farside wrote:
Excellent, Marc. What mirror source did you use? I suspect a car door mirror?
The Commie leatherette sounds just right, and so few Zenits are customised, it'll stand right out. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| トップへ戻る |
|
 |
Laurence
 登録日: 2007年3月26日 投稿: 4809 所在地: Western Washington State
Expire: 2016-06-19
|
 投稿日時: 火 7月 22, 2008 12:51 am 件名: |
|
 投稿日時: 火 7月 22, 2008 12:51 am 件名: |
|
|
Laurence wrote:
A GREAT, resourceful project! I am interested in hearing more about it! _________________
Assent, and you are sane;
Demur,—you ’re straightway dangerous,
And handled with a chain.
Emily Dickinson
Cameras and Lenses in Use:
Yashica Mat 124 w/ Yashinon 80/3.5,
CV Apo-Lanthar 90/3.5SL, (Thank you Klaus),
Pentax 645,
Flek 50,
Pentax-A 150
Pentax-A 120 Macro
Voigtlander Vitomatic I w/Color Skopar 50/2.8
Konica TC and zoom lenses (thanks Carsten)
Contax AX
Yashica ML 50/2
Yashica ML 35/2.8
Carl Zeiss Contax 50/1.4
Tamron Adaptall SP 17/3.5
Tamron Adaptall 28/2.5
Tamron Adaptall SP 300/2.8 LD (IF)
|
|
| トップへ戻る |
|
 |
lulalake
 登録日: 2007年4月22日 投稿: 1191 所在地: Near Austin Texas
Expire: 2011-11-18
|
 投稿日時: 火 7月 22, 2008 12:01 pm 件名: |
|
 投稿日時: 火 7月 22, 2008 12:01 pm 件名: |
|
|
lulalake wrote:
| Farside 氏の書き込み: |
Excellent, Marc. What mirror source did you use? I suspect a car door mirror?
The Commie leatherette sounds just right, and so few Zenits are customised, it'll stand right out. |
One very inexpensive source of front surface mirors are old Polaroid cameras. I have two that I got for $1 each for the whole camera.
They have a fairly large front surface mirrof inside. Just don't touch the front surface, it will scratch.
Jules |
|
| トップへ戻る |
|
 |
Farside
 登録日: 2007年9月1日 投稿: 6579 所在地: Ireland
Expire: 2013-12-27
|
 投稿日時: 火 7月 22, 2008 1:10 pm 件名: |
|
 投稿日時: 火 7月 22, 2008 1:10 pm 件名: |
|
|
Farside wrote:
| lulalake 氏の書き込み: |
One very inexpensive source of front surface mirors are old Polaroid cameras. I have two that I got for $1 each for the whole camera.
They have a fairly large front surface mirrof inside. Just don't touch the front surface, it will scratch.
Jules |
That's handy to know, thanks. Of course, it would have to be front-surfaced, I wasn't thinking about that. doh! _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| トップへ戻る |
|
 |
poilu
 登録日: 2007年8月26日 投稿: 10476 所在地: Greece
Expire: 2019-08-29
|
 投稿日時: 火 7月 22, 2008 1:36 pm 件名: |
|
 投稿日時: 火 7月 22, 2008 1:36 pm 件名: |
|
|
poilu wrote:
| Peter 氏の書き込み: |
| I don't see how a larger flat mirror will increase the amount of light falling on the focus screen |
You are right Peter, but experimentation is always so exciting
Keep walking Marc! _________________ T* |
|
| トップへ戻る |
|
 |
themoleman342
 登録日: 2007年10月21日 投稿: 2190 所在地: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 投稿日時: 火 7月 22, 2008 2:04 pm 件名: |
|
 投稿日時: 火 7月 22, 2008 2:04 pm 件名: |
|
|
themoleman342 wrote:
I buy my front surface mirror off of ebay. You just have to make sure you buy the right thickness (which I believe is close to 0.48'' in most cameras) or you'll have to readjust the focus.
A non-front surfaced mirror will not reflect a sufficient amount of light and it also creates ghosting.
A word about the leatherette: I found a long time ago that leatherette is needlessly expensive. An almost free source of it can be found by cutting the leather material off of school binders. It's a little thin but durable and easily cut. Plus there is almost an infinite number of colors/textures to pick from! One binder can easily cover 3 cameras.
~Marc |
|
| トップへ戻る |
|
 |
Farside
 登録日: 2007年9月1日 投稿: 6579 所在地: Ireland
Expire: 2013-12-27
|
 投稿日時: 火 7月 22, 2008 4:00 pm 件名: |
|
 投稿日時: 火 7月 22, 2008 4:00 pm 件名: |
|
|
Farside wrote:
| themoleman342 氏の書き込み: |
A word about the leatherette: I found a long time ago that leatherette is needlessly expensive. An almost free source of it can be found by cutting the leather material off of school binders. It's a little thin but durable and easily cut. Plus there is almost an infinite number of colors/textures to pick from! One binder can easily cover 3 cameras.
~Marc |
Handy thing about the binders. I used to buy leatherette by the sq.yd from upholstery suppliers to make things like gear lever gaiters - dirt cheap, too. Another source of genuine thin leather is old armchairs - the ones with the panelled sides. Usually got for free, but going around with a boxcutter is frowned on these days.
On upholstery - has anybody noticed the price of foam these days? I went to get some to pad out a couple of instrument and camera cases and was quoted some ridiculous figure, like forty bucks for enough to do one. It used to be so cheap and ubiquitous the cost wasn't even a factor, and lest anyone accuse me of living in the past, that wasn't so long ago. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| トップへ戻る |
|
 |
|
|
|
このフォーラムでは新しいトピックを投稿できません このフォーラムではトピックに返信できません このフォーラムでは自分の投稿を編集できません このフォーラムでは自分の投稿を削除できません このフォーラムでは投票に参加できません
|