MFlenses - デジタル時代の新しさ
MFLenses 2026

マニュアルフォーカスレンズフォーラム

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。
スポットライト

フォーラムトップページのおすすめパートナー掲載。

What about the rust?
前のトピックへ :: 次のトピックへ  


Reply

I took the Super Ikonta to a workshop in Bologna for defungusing. But what about the rust? This I will have to fix myself. Is there any suggestion that you can give me? How to remove the rust, how to stop it from progressing?
Any advice is welcome.


Reply

There are different chemicals used for anti-rust coatings, but I have never heard of one of those being used for photographic gear, rather boats and the like...


Reply

Orio 氏の書き込み:
I took the Super Ikonta to a workshop in Bologna for defungusing. But what about the rust? This I will have to fix myself. Is there any suggestion that you can give me? How to remove the rust, how to stop it from progressing?
Any advice is welcome.


How bad is the rust and where is it? For general rust cure I use Phosphoric Acid - it turns the rust into Iron Phosphate which is fairly inert and protects the underlying metal from further corrosion. If it's just surface rust it can be cleaned off with emery cloth and then polished up.


Reply

Farside 氏の書き込み:

How bad is the rust and where is it?


It is mostly on the frontal port, the one that opens to let the lens and bellow out.
It is quite bad it seems, but it should not be in direct contact with any camera mechanism, only exterior.

Farside 氏の書き込み:
For general rust cure I use Phosphoric Acid - it turns the rust into Iron Phosphate which is fairly inert and protects the underlying metal from further corrosion.


How do you apply it, is it possible to brush it?

Farside 氏の書き込み:
If it's just surface rust it can be cleaned off with emery cloth and then polished up.


Ok I'll try this first, what is emery cloth, is it like sandpaper?


Reply

Orio 氏の書き込み:
Farside 氏の書き込み:

How bad is the rust and where is it?


It is mostly on the frontal port, the one that opens to let the lens and bellow out.
It is quite bad it seems, but it should not be in direct contact with any camera mechanism, only exterior.

Farside 氏の書き込み:
For general rust cure I use Phosphoric Acid - it turns the rust into Iron Phosphate which is fairly inert and protects the underlying metal from further corrosion.


How do you apply it, is it possible to brush it?

Farside 氏の書き込み:
If it's just surface rust it can be cleaned off with emery cloth and then polished up.


Ok I'll try this first, what is emery cloth, is it like sandpaper?



You can brush the acid on, no problem. I use a 15-25% solution. If you can't get it, a good source of supply is a farmer supply place. Have a look at this ....

http://www.totallytriumph.net/dcforum/DCForumID43/21.shtml#1

Emery board and cloth is like sandpaper, but is carborundum (silica carbide) grit on it - available in different grit sizes. You will find that in any hardware or car repair parts shop. You will need a very fine sheet, I'd think.