MFlenses - デジタル時代の新しさ
MFLenses 2026

マニュアルフォーカスレンズフォーラム

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。
スポットライト

フォーラムトップページのおすすめパートナー掲載。

PK - EOS adaptors
前のトピックへ :: 次のトピックへ  


Reply

My dad has passed on his PK lenses to me since he hasn't used his MX in years, and I've decided I'd like to use them on my 40D (they're nothing special, just a cosina 24mm f/2.8 and a pentax SMC 50mm f/1.7, but I know they can both produce excellent image quality on my DSLR (see below)).

So about a year ago I ordered an AF confirm adaptor off ebay after doing some research, but when it arrived I hit a problem. The adaptor mounted the lenses offset from their normal position, between 1 and 2 o'clock I'd estimate. This meant the aperture leaver happened to get caught on a small corner of metal within the body, which prevented me stopping down more than a stop. I could get it to work fine by not mounting the adaptor all the way past the click, but leave it turned as far as it would go without catching the leaver. But this just wasn't secure enough to use properly so I contacted the seller and returned the adaptor.


Now I've just come across the lenses again and I still fancy using them, since I don't have any short primes and the test shots I took when I briefly had the adaptor showed lovely image quality.
So my question is, can anyone recommend a particular adaptor that they can confirm will work and not have the same problem?

I know the obvious answer is a "lever-ectomy", but my dad would prefer if I could keep the lenses in perfect working order.

Thank you for your time


Reply

Guess I'll just buy a different one and hope I don't encounter the problem again then.


Reply

squishy 氏の書き込み:
My dad has passed on his PK lenses to me since he hasn't used his MX in years, and I've decided I'd like to use them on my 40D (they're nothing special, just a cosina 24mm f/2.8 and a pentax SMC 50mm f/1.7, but I know they can both produce excellent image quality on my DSLR (see below)).

So about a year ago I ordered an AF confirm adaptor off ebay after doing some research, but when it arrived I hit a problem. The adaptor mounted the lenses offset from their normal position, between 1 and 2 o'clock I'd estimate. This meant the aperture leaver happened to get caught on a small corner of metal within the body, which prevented me stopping down more than a stop. I could get it to work fine by not mounting the adaptor all the way past the click, but leave it turned as far as it would go without catching the leaver. But this just wasn't secure enough to use properly so I contacted the seller and returned the adaptor.


Now I've just come across the lenses again and I still fancy using them, since I don't have any short primes and the test shots I took when I briefly had the adaptor showed lovely image quality.
So my question is, can anyone recommend a particular adaptor that they can confirm will work and not have the same problem?

I know the obvious answer is a "lever-ectomy", but my dad would prefer if I could keep the lenses in perfect working order.

Thank you for your time

Hi squishy, welcome to the forum and I'm so sorry you didn't get a reply earlier. We try to make sure no posts are left unanswered but this one slipped through somehow. Embarassed

PK > EOS adapters always mount the lenses non-vertical. This is unavoidable due to a conflict of the positions of the PK and EOS bayonet recesses and projections. However you shouldn't have problems with the aperture ring. My adapter works fine on my 400D. However, it doesn't have an AF chip, maybe that's the reason. I bought it from Roxsen, but Big_Is is another respected seller.


Reply

I have just a cheapo one from big_is (I believe) which works fine (on a crop Canon) as well. No AF confirm though.


Reply

Thanks guys, I didn't mean my earlier post to sound as spiteful as it seems to have come out Embarassed

Thanks for the help, but can I just check Graham, what bodies exactly have you used the adaptor on?

Peterqd, I've been looking at some pictures of the 400D mount, and it doesn't have a little corner of metal in the same place as the 40D inside the body where the aperture leaver was catching on mine.

Might seem silly to put so scrutiny into a cheap item like this, but buying and returning from hong kong and china and ebay where 90% of the adaptors seem to be sold from ends up taking weeks, saves me trouble to be sure now.


Reply

squishy 氏の書き込み:
Peterqd, I've been looking at some pictures of the 400D mount, and it doesn't have a little corner of metal in the same place as the 40D inside the body where the aperture leaver was catching on mine.

I've read about that somewhere, but I didn't take a lot of notice as it didn't concern my camera. I think there's an answer, I'll see if I can find it. You could try emailing big_is about it, he's very knowledgable and helpful.

http://stores.ebay.co.uk/big-is-camera