| 前のトピックへ :: 次のトピックへ |
| 作成者 |
メッセージ |
philslizzy
 登録日: 2012年8月7日 投稿: 4753 所在地: Cheshire, England
|
 投稿日時: 火 6月 03, 2014 2:42 pm 件名: Pentax ME super problem |
|
 投稿日時: 火 6月 03, 2014 2:42 pm 件名: Pentax ME super problem |
|
|
philslizzy wrote:
I picked up a bunch of camera bodies from gumtree. I was mostly interested in an old Edixa Reflex. However a couple of ME supers were in the box. One's mirror was jammed up and the other doesn't appear to meter with new batteries in it. Both otherwise look in nice clean condition.
Is there a simple cure for these woes?? _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| トップへ戻る |
|
 |
luisalegria
 登録日: 2008年3月7日 投稿: 6602 所在地: San Francisco, USA
Expire: 2018-01-18
|
 投稿日時: 火 6月 03, 2014 4:04 pm 件名: |
|
 投稿日時: 火 6月 03, 2014 4:04 pm 件名: |
|
|
luisalegria wrote:
Jammed mirror may be due to gummed up mechanism under the baseplate. Similar case to Spotmatic actually.
The ME Super should fire at flash sync speed with no batteries so its relatively easy to diagnose mechanical problems.
Be careful about electronics/connectors under the base.
Various other things could be wrong. _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| トップへ戻る |
|
 |
Lloydy
 登録日: 2009年9月2日 投稿: 7880 所在地: Ironbridge. UK.
Expire: 2022-01-01
|
 投稿日時: 火 6月 03, 2014 6:35 pm 件名: |
|
 投稿日時: 火 6月 03, 2014 6:35 pm 件名: |
|
|
Lloydy wrote:
Most seem to jam sometime, and the fix isn't that hard - there's some good instructions on the internet - I know I have them bookmarked so I'll post them shortly.
The mirror is possibly stuck to the foam rubber bumper at the top of the lens housing, there are also some rubber bumpers on the mirror mechanism inside the camera, but I've always been lucky and they haven't been the cause of a stuck mirror.
http://www.pentaxforums.com/forums/120-general-technical-troubleshooting/196976-spotmatic-mirror-return.html
The light seals will almost certainly be a sticky mess and need replacing, if they are bad then the mirror bumper will be the same. Gently push the mirror away from the bumper and it should flick down, don't force it all the down. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| トップへ戻る |
|
 |
philslizzy
 登録日: 2012年8月7日 投稿: 4753 所在地: Cheshire, England
|
 投稿日時: 火 6月 03, 2014 9:44 pm 件名: |
|
 投稿日時: 火 6月 03, 2014 9:44 pm 件名: |
|
|
philslizzy wrote:
The mirror was stuck to the bumper and came down. I read somewhere that if you wind on then let the winder lever come only so far back then push it again you can feel the mechanism engage and it fires next time. That it does but I'll take a look underneath and follow the directions given in Dave's link.
The other with no shutter/mirror problems appears to have no electronics. Any ideas? _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| トップへ戻る |
|
 |
mo
 登録日: 2009年8月27日 投稿: 8979 所在地: Australia
Expire: 2016-07-30
|
 投稿日時: 火 6月 03, 2014 10:42 pm 件名: |
|
 投稿日時: 火 6月 03, 2014 10:42 pm 件名: |
|
|
mo wrote:
Have a look on here under the ME repair,Attila has made them a download...and I can't actually remember what was in them.
http://forum.mflenses.com/pdf-links-1981-repairers-journals-t61261.html _________________ Moira, Moderator
Fuji XE-1,Pentax K-01,Panasonic G1,Panasonic G5,Pentax MX
Ricoh Singlex TLS,KR-5,KR-5Super,XR-10
Lenses
Auto Rikenon's 55/1.4, 1.8, 2.8... 50/1.7 Takumar 2/58 Preset Takumar 2.8/105 Auto Takumar 2.2/55, 3.5/35 Super Takumar 1.8/55...Macro Takumar F4/50... CZJ Biotar ALU M42 2/58 CZJ Tessar ALU M42 2.8/50
CZJ DDR Flektogon Zebra M42 2.8/35 CZJ Pancolar M42 2/50 CZJ Pancolar Exakta 2/50
Auto Mamiya/Sekor 1.8/55 ...Auto Mamiya/Sekor 2/50 Auto Mamiya/Sekor 2.8/50 Auto Mamiya/Sekor 200/3.5 Tamron SP500/8 Tamron SP350/5.6 Tamron SP90/2.5
Primoplan 1.9/58 Primagon 4.5/35 Telemegor 5.5/150 Angenieux 3.5/28 Angenieux 3,5/135 Y 2
Canon FL 58/1.2,Canon FL85/1.8,Canon FL 100/3.5,Canon SSC 2.8/100 ,Konica AR 100/2.8, Nikkor P 105/2.5
|
|
| トップへ戻る |
|
 |
philslizzy
 登録日: 2012年8月7日 投稿: 4753 所在地: Cheshire, England
|
 投稿日時: 火 6月 03, 2014 11:21 pm 件名: |
|
 投稿日時: 火 6月 03, 2014 11:21 pm 件名: |
|
|
philslizzy wrote:
Thanks Mo, but all the links download the same document. Interesting stuff though. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| トップへ戻る |
|
 |
Lloydy
 登録日: 2009年9月2日 投稿: 7880 所在地: Ironbridge. UK.
Expire: 2022-01-01
|
 投稿日時: 火 6月 03, 2014 11:41 pm 件名: |
|
 投稿日時: 火 6月 03, 2014 11:41 pm 件名: |
|
|
Lloydy wrote:
http://www.kyphoto.com/classics/pentaxmeproblems.html
Go straight to option2 and take the bottom plate off. What I do is prod the silver, lower, lever a bit in every direction it releases the jam. If it's option 1 and the little tab is broken off then it's a pile of spare parts.
Works for me every time, I've done 5 or 6 now. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| トップへ戻る |
|
 |
philslizzy
 登録日: 2012年8月7日 投稿: 4753 所在地: Cheshire, England
|
 投稿日時: 木 6月 05, 2014 12:20 am 件名: |
|
 投稿日時: 木 6月 05, 2014 12:20 am 件名: |
|
|
philslizzy wrote:
Bugger bugger bugger. I followed the option B and pressed the lever down. It seems to catch now. Attempting to take off the top plate (unsuccessfully) I managed to push the rewind shank into the camera body. Now I cant open it and fix the crank back. Bugger!! _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| トップへ戻る |
|
 |
luisalegria
 登録日: 2008年3月7日 投稿: 6602 所在地: San Francisco, USA
Expire: 2018-01-18
|
 投稿日時: 木 6月 05, 2014 5:51 am 件名: |
|
 投稿日時: 木 6月 05, 2014 5:51 am 件名: |
|
|
luisalegria wrote:
Had a similar problem with a spotmatic.
If its a hollow shaft you may be able to fish or out with a wire. _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| トップへ戻る |
|
 |
Lloydy
 登録日: 2009年9月2日 投稿: 7880 所在地: Ironbridge. UK.
Expire: 2022-01-01
|
 投稿日時: 木 6月 05, 2014 10:08 am 件名: |
|
 投稿日時: 木 6月 05, 2014 10:08 am 件名: |
|
|
Lloydy wrote:
Get a bit of Wire coathanger about 150mm long, bend about 4mm over on the end and hit it down to a very tight U bend with a hammer. Use a fine file to round it off so it fits down the hole. Make sure the end of the bent over bit is hooked slightly. Then poke it down the hole, fiddle about until it hooks under the catch / end of the tube and lift. The film door opens.  _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| トップへ戻る |
|
 |
philslizzy
 登録日: 2012年8月7日 投稿: 4753 所在地: Cheshire, England
|
 投稿日時: 木 6月 05, 2014 10:47 pm 件名: |
|
 投稿日時: 木 6月 05, 2014 10:47 pm 件名: |
|
|
philslizzy wrote:
Spent an hour fiddling about. Bugger it its going back in the box. The other fires ok but no electronics. Any ideas? Help! _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| トップへ戻る |
|
 |
Lloydy
 登録日: 2009年9月2日 投稿: 7880 所在地: Ironbridge. UK.
Expire: 2022-01-01
|
 投稿日時: 木 6月 05, 2014 11:14 pm 件名: |
|
 投稿日時: 木 6月 05, 2014 11:14 pm 件名: |
|
|
Lloydy wrote:
I can't find my bit of wire, if I find it I'll send it to you - or I'll make another. I opened a Spottie that I broke the rewind crank off just about instantly with the bit of bent wire. I've got a dead one, I'll mess with it over the weekend. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| トップへ戻る |
|
 |
visualopsins
 登録日: 2009年3月5日 投稿: 11699 所在地: California
Expire: 2027-07-11
|
 投稿日時: 木 6月 05, 2014 11:42 pm 件名: |
|
 投稿日時: 木 6月 05, 2014 11:42 pm 件名: |
|
|
visualopsins wrote:
Pencil eraser the battery compartment contacts; bent contacts relax over time, need to be un-bent a little for more pressure on battery. _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| トップへ戻る |
|
 |
philslizzy
 登録日: 2012年8月7日 投稿: 4753 所在地: Cheshire, England
|
 投稿日時: 金 6月 06, 2014 11:12 pm 件名: |
|
 投稿日時: 金 6月 06, 2014 11:12 pm 件名: |
|
|
philslizzy wrote:
Dont worry Dave, everything is ok now. I dont know why I didnt take it out before closing the camera!!
I'll clean the contacts and bend them out a bit as visualopsins suggests.
Thanks for your help. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| トップへ戻る |
|
 |
|
|
|
このフォーラムでは新しいトピックを投稿できません このフォーラムではトピックに返信できません このフォーラムでは自分の投稿を編集できません このフォーラムでは自分の投稿を削除できません このフォーラムでは投票に参加できません
|