MFlenses - デジタル時代の新しさ
MFLenses 2026

マニュアルフォーカスレンズフォーラム

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。
スポットライト

フォーラムトップページのおすすめパートナー掲載。

P6 to EOS Adapter Removal Problem
前のトピックへ :: 次のトピックへ  


Reply

Good morning,

I received a P6 mount lens last week but only have one P6 - EOS adapter, which is currently on another lens. No matter what force I apply, it refuses to move, and will not come off the lens.

Are there some magic words that I must whisper in order for the situation to come unstuck, or is it time for some percussive maintenance (in the form of a hammer)???

Thanks in advance for any/all advice.

M


Reply

Hi,

Got the same issue with my P6-to-P/K adapter, solved with a bit of WD40 and a white sticker where i wrote "I will never play Hulk again when locking this damn collar" Wink

Cheers


Reply

They do stick a bit - all you can do is apply slowly increasing brute force after heating it with a hair dryer or similar. One of those jar-top removal straps is just the thing. If it wasn't a lens attached to it, I'd dunk it in hot water. Of course, this tends to happen when you forget which way to turn it and tighten it to start with. Embarassed


Reply

I had a same issue. Lasso with a coax or any cable arount id. Stress and screw it with the cable.


Reply

Thanks for your help guys - have tried everything (except the hammer Wink), but it's not moving a millimetre.

Oh well, time to get another adapter and hope this one doesn't stick Embarassed


Reply

Mal1905 氏の書き込み:
Thanks for your help guys - have tried everything (except the hammer Wink), but it's not moving a millimetre.

Oh well, time to get another adapter and hope this one doesn't stick Embarassed


I had the similar problem. I thought that I would never be able to unmount it. But then, all of a sudden, it moved. One of these rubber slings did the trick, these friction tools help.


Reply

LucisPictor 氏の書き込み:
I had the similar problem. I thought that I would never be able to unmount it. But then, all of a sudden, it moved. One of these rubber slings did the trick, these friction tools help.


Have decided that I'll leave it alone for a while and come back to it some time in the future - thanks for your help.


Reply

Mine likes to pretend it is stuck, and the harder you twist it the more it sticks. The solution seems to be to leave it for a moment and then give it a gentle twist and it flies undone. Strange but true.


Reply

I have same issue with a Nikon adapter I did try to remove with force , result is aperture blades are gone... stucked, and adapter is still there.

I never had similar problem with genuine Exakta or M42 adapters.


Reply

Farside 氏の書き込み:
this tends to happen when you forget which way to turn it and tighten it to start with. Embarassed

This went through my mind too. Just to be certain, with the front of the lens pointing at your face, the breech lock has to be turned anti-clockwise to release the lens.


Reply

Use rubber bands to help grip.

If that fails, send it to me. Twisted Evil


Reply

PaulC 氏の書き込み:
Mine likes to pretend it is stuck, and the harder you twist it the more it sticks. The solution seems to be to leave it for a moment and then give it a gentle twist and it flies undone. Strange but true.

Mine's done that a couple of times - perhaps it's micro-welding Smile I suspect the adapters are made of alloy that's a bit too soft and it tends to take a grip surface to surface. Also, the softness lends itself to distortion and tight spots. A smear of silicone grease might help for future use.