| 前のトピックへ :: 次のトピックへ |
| 作成者 |
メッセージ |
arhi_tectu1
 登録日: 2009年2月9日 投稿: 315
|
 投稿日時: 木 4月 23, 2009 1:44 pm 件名: Metering problems |
|
 投稿日時: 木 4月 23, 2009 1:44 pm 件名: Metering problems |
|
|
arhi_tectu1 wrote:
hi there
i have some problems with my camera metering when i use manual lenses
if i use them at full aperture there is no problem but if i go for f 5.6 or beyond the camera metering sis overexposes or underexposes never right(with every metering sis)
the problem appeared when my C/Y adapter chip broke down and i got an err 101(clean the lens contact's) or something like that after this i removed the chip .
can the chip adapter mess the camera metering system ? _________________ MF- CZJ 180/2.8@CZJ 50/2.8@Contax CZ 50/1.4@Contax CZ 135/2.8@Nikkor P 180/2.8@Helios 44@Mir 37/2.8@Industar 50/3.5@Pentacon 28/2.8@Pentacon 300/4
AF- Canon 70-200/4L@Canon 60/2.8Macro@Tokina 11-16/2.8
Camera Canon 40D |
|
| トップへ戻る |
|
 |
martinsmith99
 登録日: 2008年8月31日 投稿: 7029 所在地: S Glos, UK
Expire: 2013-11-18
|
 投稿日時: 日 4月 26, 2009 1:00 pm 件名: |
|
 投稿日時: 日 4月 26, 2009 1:00 pm 件名: |
|
|
martinsmith99 wrote:
Is this on your 40D?
If so, what metering option are you using?
Do you have some examples to post?
I have some chipped and non chipped adapters and mine seems to meter ok with either. Can you test with another adapter? _________________ Casual attendance these days |
|
| トップへ戻る |
|
 |
arhi_tectu1
 登録日: 2009年2月9日 投稿: 315
|
 投稿日時: 日 4月 26, 2009 3:47 pm 件名: |
|
 投稿日時: 日 4月 26, 2009 3:47 pm 件名: |
|
|
arhi_tectu1 wrote:
yes is my 40D
the problem happens at all metering option's randomly.
it firs happened with my C/Y adapter when i started the camera i got an err
to clean my lens contact's after i did that the camera did start but the metering was going wild (like the camera did know what to do it was flickering between 1/8000 and 1/125 very very fast , so no shutter release
when i got home i decided to remove the chip) out of 5 img only 1 is exposed correctly
ill try to make a test and post them _________________ MF- CZJ 180/2.8@CZJ 50/2.8@Contax CZ 50/1.4@Contax CZ 135/2.8@Nikkor P 180/2.8@Helios 44@Mir 37/2.8@Industar 50/3.5@Pentacon 28/2.8@Pentacon 300/4
AF- Canon 70-200/4L@Canon 60/2.8Macro@Tokina 11-16/2.8
Camera Canon 40D |
|
| トップへ戻る |
|
 |
martinsmith99
 登録日: 2008年8月31日 投稿: 7029 所在地: S Glos, UK
Expire: 2013-11-18
|
 投稿日時: 日 4月 26, 2009 5:31 pm 件名: |
|
 投稿日時: 日 4月 26, 2009 5:31 pm 件名: |
|
|
martinsmith99 wrote:
Do your other lenses work ok? I'm just trying to find out if it's a camera or chip fault. _________________ Casual attendance these days |
|
| トップへ戻る |
|
 |
aoleg
 登録日: 2008年2月22日 投稿: 1387 所在地: Berlin, DE
|
 投稿日時: 月 4月 27, 2009 3:59 am 件名: |
|
 投稿日時: 月 4月 27, 2009 3:59 am 件名: |
|
|
aoleg wrote:
The problem is well-known for the 40D and other Canon 1.6x crop cameras. All of my lenses behaved exactly as you described on my 40D: more or less normal metering wide open and severe overexposure stopped down. Apparently, AF confirmation chips partially mitigated the problem (e.g. I was still getting overexposure on most lenses, but not by as much as without the chip).
This is believed to happen because of the larger circle of light produced by 35mm lenses than required to cover the cropped sensor; there've been reports on people who managed to fix the problem completely by putting something at the back of the lens to reduce the light circle. Have a look at http://www.penta-club.ru/forum/index.php?showtopic=41859 (it's in Russian but there are lots of pics so it is easy to understand what has been done and what has been achieved).
That said, full-frame cameras (e.g. Canon's 5D and 5D mkII) do not exhibit this behavior with manual lenses, with or without the chip. _________________ List of lenses |
|
| トップへ戻る |
|
 |
ManualFocus-G
 登録日: 2008年12月29日 投稿: 6675 所在地: United Kingdom
Expire: 2014-11-24
|
 投稿日時: 月 4月 27, 2009 11:06 am 件名: |
|
 投稿日時: 月 4月 27, 2009 11:06 am 件名: |
|
|
ManualFocus-G wrote:
That's a smart idea.
With the risk of hijacking the thread, does anyone have any suggestions as to how to stop my Sony alphas UNDER exposing past f5.6?
Thanks _________________ Graham
Shooter of choice: Nikon Z6
Lenses:
Vivitar presets
Soligor autos
Pentacon presets
Prakticar PBs
Some other weird stuff!
|
|
| トップへ戻る |
|
 |
arhi_tectu1
 登録日: 2009年2月9日 投稿: 315
|
 投稿日時: 月 4月 27, 2009 12:57 pm 件名: |
|
 投稿日時: 月 4月 27, 2009 12:57 pm 件名: |
|
|
arhi_tectu1 wrote:
today i had done some test's an i have the same problem only when i go past f 5.6 to f 8 the camera (canon 40D) overexposes.
is this a normal behavior for DSLR'S when used with manual lenses ??
what i want to ask is everybody that uses crop sensors experiences the same problem as aoleg said?
by the way thanks aoleg i was thinking that my camera is broken
thanks everybody _________________ MF- CZJ 180/2.8@CZJ 50/2.8@Contax CZ 50/1.4@Contax CZ 135/2.8@Nikkor P 180/2.8@Helios 44@Mir 37/2.8@Industar 50/3.5@Pentacon 28/2.8@Pentacon 300/4
AF- Canon 70-200/4L@Canon 60/2.8Macro@Tokina 11-16/2.8
Camera Canon 40D |
|
| トップへ戻る |
|
 |
Carlsson
 登録日: 2008年7月26日 投稿: 793 所在地: Portugal
|
 投稿日時: 月 4月 27, 2009 1:36 pm 件名: |
|
 投稿日時: 月 4月 27, 2009 1:36 pm 件名: |
|
|
Carlsson wrote:
This is my personal workaround, I use evaluative metering and set the exposure compensation two points in minus direction (manual page 93). Save this setting to C1, C2 or C3.
Activate the histogram, for better evaluation.
Hope this helps.
PS: changing the focussing screen to a manual katzeye screen helped alot, metering is much better now. _________________
Contax III, Zeiss Ikon ZM, Contax AX, EOS 5D, R-D1
https://mariaeero.com/contax/ |
|
| トップへ戻る |
|
 |
poilu
 登録日: 2007年8月26日 投稿: 10476 所在地: Greece
Expire: 2019-08-29
|
 投稿日時: 月 4月 27, 2009 1:59 pm 件名: |
|
 投稿日時: 月 4月 27, 2009 1:59 pm 件名: |
|
|
poilu wrote:
distagon 28:2.8 without chip handeld on 40D
no exposure compensation on the 40D, untouched exposure in pp
I see more variation in auto WB than exposure
tip: I have the EE-s screen who is know to fix exposure problem
| コード: |
2.8 1/250
4.0 1/125
5.6 1/80
8.0 1/40
11.0 1/20
16.0 1/10
|
 |
|
| トップへ戻る |
|
 |
martinsmith99
 登録日: 2008年8月31日 投稿: 7029 所在地: S Glos, UK
Expire: 2013-11-18
|
 投稿日時: 月 4月 27, 2009 2:14 pm 件名: |
|
 投稿日時: 月 4月 27, 2009 2:14 pm 件名: |
|
|
martinsmith99 wrote:
I use evaluative metering and rarely have any problems. I have to give +or- EV to a few lenses, but only a small amout and the problem is uniform.
Maybe my focus screen selection is helping (the 3rd option, can't remember what it's called)? _________________ Casual attendance these days |
|
| トップへ戻る |
|
 |
arhi_tectu1
 登録日: 2009年2月9日 投稿: 315
|
 投稿日時: 月 4月 27, 2009 3:21 pm 件名: |
|
 投稿日時: 月 4月 27, 2009 3:21 pm 件名: |
|
|
arhi_tectu1 wrote:
thank you so much everybody
i think i will buy a katzeye screen and see if it resolved the problem
Thanks _________________ MF- CZJ 180/2.8@CZJ 50/2.8@Contax CZ 50/1.4@Contax CZ 135/2.8@Nikkor P 180/2.8@Helios 44@Mir 37/2.8@Industar 50/3.5@Pentacon 28/2.8@Pentacon 300/4
AF- Canon 70-200/4L@Canon 60/2.8Macro@Tokina 11-16/2.8
Camera Canon 40D |
|
| トップへ戻る |
|
 |
greg
 登録日: 2009年3月21日 投稿: 683
Expire: 2012-12-03
|
 投稿日時: 月 4月 27, 2009 4:06 pm 件名: |
|
 投稿日時: 月 4月 27, 2009 4:06 pm 件名: |
|
|
greg wrote:
| aoleg 氏の書き込み: |
This is believed to happen because of the larger circle of light produced by 35mm lenses than required to cover the cropped sensor; there've been reports on people who managed to fix the problem completely by putting something at the back of the lens to reduce the light circle. Have a look at http://www.penta-club.ru/forum/index.php?showtopic=41859 (it's in Russian but there are lots of pics so it is easy to understand what has been done and what has been achieved).
|
Thank you for the link. From what I can gather, it looks as if it is the same type of result (not necessarily the same cause, I realize) as using a bare VPK Miniscus lens on a DSLR. Just the masking is at the rear of the lens rather than the front.
I will have to try it with my Canon f1.8 28mm that has a LOT of exposure and focusing problems on my XTi. It is a FF lens, perhaps this will help. Please forgive me for blaspheming on this MF forum.  |
|
| トップへ戻る |
|
 |
Carlsson
 登録日: 2008年7月26日 投稿: 793 所在地: Portugal
|
 投稿日時: 月 4月 27, 2009 5:42 pm 件名: |
|
 投稿日時: 月 4月 27, 2009 5:42 pm 件名: |
|
|
Carlsson wrote:
| arhi_tectu1 氏の書き込み: |
thank you so much everybody
i think i will buy a katzeye screen and see if it resolved the problem
Thanks |
Have you checked this? http://forum.mflenses.com/custom-focus-split-screens-for-most-dslr-available-now-t16369.html
Perhaps this focus screen might help? _________________
Contax III, Zeiss Ikon ZM, Contax AX, EOS 5D, R-D1
https://mariaeero.com/contax/ |
|
| トップへ戻る |
|
 |
Olivier
 登録日: 2009年2月18日 投稿: 5097 所在地: France
Expire: 2015-08-06
|
 投稿日時: 土 5月 02, 2009 10:23 am 件名: |
|
 投稿日時: 土 5月 02, 2009 10:23 am 件名: |
|
|
Olivier wrote:
| aoleg 氏の書き込み: |
The problem is well-known for the 40D and other Canon 1.6x crop cameras. All of my lenses behaved exactly as you described on my 40D: more or less normal metering wide open and severe overexposure stopped down. Apparently, AF confirmation chips partially mitigated the problem (e.g. I was still getting overexposure on most lenses, but not by as much as without the chip).
|
Exactly the same with my 40D and I have an AF confirmation chip.
Wide open at 2.8 for instance : ok
5.6 : -2 stops left
8 : -4 stops left
11 : -6 stops left
16 : full left
I will have a look at what Carlsson said about metering method.
Olivier _________________ Olivier - Moderator
Dslr : Olympus Pen E-P2 - Fujifilm X-Pro2 - Canon 5D MkIII.
SLr and MF lenses : for feedback and helping people, cameras and lenses I own : full list here http://forum.mflenses.com/viewtopic,p,1442740.html#1442740 |
|
| トップへ戻る |
|
 |
Olivier
 登録日: 2009年2月18日 投稿: 5097 所在地: France
Expire: 2015-08-06
|
 投稿日時: 土 5月 02, 2009 10:45 am 件名: |
|
 投稿日時: 土 5月 02, 2009 10:45 am 件名: |
|
|
Olivier wrote:
Poilu : what is a EE-s screen ?
Merci d'avance.
Olivier
 _________________ Olivier - Moderator
Dslr : Olympus Pen E-P2 - Fujifilm X-Pro2 - Canon 5D MkIII.
SLr and MF lenses : for feedback and helping people, cameras and lenses I own : full list here http://forum.mflenses.com/viewtopic,p,1442740.html#1442740 |
|
| トップへ戻る |
|
 |
Olivier
 登録日: 2009年2月18日 投稿: 5097 所在地: France
Expire: 2015-08-06
|
 投稿日時: 木 5月 14, 2009 8:43 pm 件名: |
|
 投稿日時: 木 5月 14, 2009 8:43 pm 件名: |
|
|
Olivier wrote:
UP...
Please, what is a EE screen ?
Thanks
Olivier _________________ Olivier - Moderator
Dslr : Olympus Pen E-P2 - Fujifilm X-Pro2 - Canon 5D MkIII.
SLr and MF lenses : for feedback and helping people, cameras and lenses I own : full list here http://forum.mflenses.com/viewtopic,p,1442740.html#1442740 |
|
| トップへ戻る |
|
 |
Orio
登録日: 2007年2月24日 投稿: 29545 所在地: West Emilia
Expire: 2012-12-04
|
 投稿日時: 木 5月 14, 2009 8:51 pm 件名: |
|
 投稿日時: 木 5月 14, 2009 8:51 pm 件名: |
|
|
Orio wrote:
Ee is the name of Canon's screen replacements.
They come in various flavours (Ee-s, Ee-whatever...) _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| トップへ戻る |
|
 |
Olivier
 登録日: 2009年2月18日 投稿: 5097 所在地: France
Expire: 2015-08-06
|
 投稿日時: 金 5月 15, 2009 6:40 am 件名: |
|
 投稿日時: 金 5月 15, 2009 6:40 am 件名: |
|
|
Olivier wrote:
Thanks Orio.
 _________________ Olivier - Moderator
Dslr : Olympus Pen E-P2 - Fujifilm X-Pro2 - Canon 5D MkIII.
SLr and MF lenses : for feedback and helping people, cameras and lenses I own : full list here http://forum.mflenses.com/viewtopic,p,1442740.html#1442740 |
|
| トップへ戻る |
|
 |
|
|
|
このフォーラムでは新しいトピックを投稿できません このフォーラムではトピックに返信できません このフォーラムでは自分の投稿を編集できません このフォーラムでは自分の投稿を削除できません このフォーラムでは投票に参加できません
|