 投稿日時: 土 8月 06, 2011 7:10 pm 件名: |
|
 投稿日時: 土 8月 06, 2011 7:10 pm 件名: |
|
|
marty wrote:
Hi, Luca. Let me tell you, there is no right or wrong workflow (apart the obvious, that is). There will be "one" workflow that will eventually work for you and you will find it with the experience, just don't be in a hurry. That said, my advice is to be very consistent with film exposure and development. Just stick with one film and one developer to begin with (I assume we're talking about b&w, but in principle nothing changes). Always make a proof sheet of the entire roll, the rule here is that you have to get viewable frames with no visible edges, the unexposed edges of the film have to be as black as the surroundings, that is. If you cannot achieve this no problem, in most cases you'll be able to make satisfactory prints the same. You pick a frame you want to print and chose then the dimension of the enlargement and set up the enlarger. At this point make a incremental proof at grade 2. Cover with a cardboard all the paper but one strip and expose for 5". Uncover one strip at a time thereafter without moving the paper and expose each strip for 5". Develop and fix. Chose the time relative to the frame that looks best. Expose a fresh sheet with that time. If the contrast is satisfactory you're done, otherwise play with contrast grades. Remember that changing contrast grade the exposure might also need a tweak, your eyes will tell you. This is the process in a nutshell. I do not need to tell you to work under safelight from instant before to take out the paper box to the time the fix is at least at a half. I will not lie to you, you're going to waste lotsa paper in the beginning but after a while you will eventually reach a point when just looking at the initial proof sheet you'll be able to get a working print in the ball park. For a more detailed explanation I advice you to get yourself a good book on the subject. The Print by Adams (already mentioned) is considered by someone a kinda bible, I think it's a very good book along with The Negative and The Camera. If you feel you need a more basic introduction I advice Black & White Photography by Thomas Mc Govern, though I'm not sure if it's available an Italian version. Good light an good luck .
Best, M. _________________ Canon FD
Bodies: AT-1, A-1, T-90
Lenses: nFD 20mm f2.8, 24 f2.8, 28 f2.8, 35 f2, FD 50 f1.8 S.C., 85 f1.8, 100 f2.8, 135 f2.8, 200 f4, 300 f4
|