| 前のトピックへ :: 次のトピックへ |
| 作成者 |
メッセージ |
ForenSeil
 登録日: 2011年4月15日 投稿: 2731 所在地: Kappeln, Schleswig-Holstein, Germany.
|
 投稿日時: 金 1月 25, 2013 12:20 am 件名: "Errors" in film emulsion? |
|
 投稿日時: 金 1月 25, 2013 12:20 am 件名: "Errors" in film emulsion? |
|
|
ForenSeil wrote:
Hi
I'm getting sometimes such "errors" on B/W films. It occurs maybe once in 1 of maybe 5 rolls.
They ruined a few nice shots over the time
That's TriX 400 pushed to ISO 3200 in Xtol 1+1 - but I've already seen it with other dev.-/film combinations.
Can anyone say how to avoid them? _________________ I'm not a collector, I'm a tester
My camera: Sony A7+Zeiss Sonnar 55/1.8
Current favourite lenses (I have many more):
A few macro-Tominons, Samyang 12/2.8, Noritsu 50.7/9.5, Rodagon 105/5.6 on bellows, Samyang 135/2, Celestron C8 2000mm F10
Most wanted: Samyang 24/1.4, Laowa 100/2.8 2x, Nikon 200/2 ED |
|
| トップへ戻る |
|
 |
berraneck
 登録日: 2009年5月24日 投稿: 972 所在地: prague, czech republic
|
 投稿日時: 金 1月 25, 2013 1:05 am 件名: |
|
 投稿日時: 金 1月 25, 2013 1:05 am 件名: |
|
|
berraneck wrote:
just first idea, do you keep temperature of all liquids about the same? I´ve seen some emulsion errors when washing temperature was too hot or too cool, but never this size _________________ equipment doesn´t count, good photographs do |
|
| トップへ戻る |
|
 |
David
 登録日: 2011年4月13日 投稿: 1869 所在地: Denver, Colorado
Expire: 2013-01-25
|
 投稿日時: 金 1月 25, 2013 1:35 am 件名: |
|
 投稿日時: 金 1月 25, 2013 1:35 am 件名: |
|
|
David wrote:
I had that happen when a piece of emulsion had torn in the film spiral's clip. The emulsion came off during developing and adhered to another part of the film. So, my question is whether that part of the emulsion (while in a plastic sheet) has a different relief? _________________ http://www.youtube.com/user/hancockDavidM |
|
| トップへ戻る |
|
 |
Attila
 登録日: 2007年2月24日 投稿: 58002
Expire: 2025-11-18
|
 投稿日時: 金 1月 25, 2013 1:42 am 件名: |
|
 投稿日時: 金 1月 25, 2013 1:42 am 件名: |
|
|
Attila wrote:
I never had similar experience. |
|
| トップへ戻る |
|
 |
themoleman342
 登録日: 2007年10月21日 投稿: 2190 所在地: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 投稿日時: 金 1月 25, 2013 2:58 am 件名: |
|
 投稿日時: 金 1月 25, 2013 2:58 am 件名: |
|
|
themoleman342 wrote:
I can't say I've experienced anything like this before either. It does look as if a big piece of something adhered to the film. Xtol, I have noticed, has a tendency to separate and get little white flakes that settle to the bottom of the container. I wonder if one of these flakes stuck to the film somehow?
The image is not entirely lost. After about 2 minutes of cloning I ended up with this:
Obviously it's still very visible but if you spend some actual time, most things are salvageable. |
|
| トップへ戻る |
|
 |
iangreenhalgh1
 登録日: 2011年3月18日 投稿: 15679
Expire: 2014-01-07
|
 投稿日時: 金 1月 25, 2013 3:25 am 件名: |
|
 投稿日時: 金 1月 25, 2013 3:25 am 件名: |
|
|
iangreenhalgh1 wrote:
| Attila 氏の書き込み: |
| I never had similar experience. |
Me neither. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| トップへ戻る |
|
 |
Excalibur
 登録日: 2009年7月19日 投稿: 5018 所在地: UK
Expire: 2014-04-21
|
 投稿日時: 金 1月 25, 2013 8:57 am 件名: |
|
 投稿日時: 金 1月 25, 2013 8:57 am 件名: |
|
|
Excalibur wrote:
Well I've had that problem a few times with colour negs done by the supermarket, but a much smaller irregular white patch and always assumed it was something floating around the developer\fixer that stuck to the neg. It has never bothered me as I just remove it with photoshop. _________________ Canon A1, AV1, T70 & T90, EOS 300 and EOS300v, Chinon CE and CP-7M. Contax 139, Fuji STX-2, Konica Autoreflex TC, FS-1, FT-1, Minolta X-700, X-300, XD-11, SRT101b, Nikon EM, FM, F4, F90X, Olympus OM2, Pentax S3, Spotmatic, Pentax ME super, Praktica TL 5B, & BC1, , Ricoh KR10super, Yashica T5D, Bronica Etrs, Mamiya RB67 pro AND drum roll:- a Sony Nex 3
.........past gear Tele Rolleiflex and Rollei SL66.
Many lenses from good to excellent. |
|
| トップへ戻る |
|
 |
spoilerhead
 登録日: 2012年1月25日 投稿: 68 所在地: ITaly
|
 投稿日時: 金 1月 25, 2013 3:05 pm 件名: |
|
 投稿日時: 金 1月 25, 2013 3:05 pm 件名: |
|
|
spoilerhead wrote:
had that once when two windings of the film touched on the development reel. _________________ Eos (A/D) + M42 |
|
| トップへ戻る |
|
 |
themoleman342
 登録日: 2007年10月21日 投稿: 2190 所在地: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 投稿日時: 金 1月 25, 2013 3:27 pm 件名: |
|
 投稿日時: 金 1月 25, 2013 3:27 pm 件名: |
|
|
themoleman342 wrote:
| 引用: |
| had that once when two windings of the film touched on the development reel. |
Wouldn't that stop the developer from reaching the film, resulting in a dark spot? |
|
| トップへ戻る |
|
 |
iangreenhalgh1
 登録日: 2011年3月18日 投稿: 15679
Expire: 2014-01-07
|
 投稿日時: 金 1月 25, 2013 4:57 pm 件名: |
|
 投稿日時: 金 1月 25, 2013 4:57 pm 件名: |
|
|
iangreenhalgh1 wrote:
| themoleman342 氏の書き込み: |
| 引用: |
| had that once when two windings of the film touched on the development reel. |
Wouldn't that stop the developer from reaching the film, resulting in a dark spot? |
Yes, that is what happens. The emulsion remains on the neg and is opaque so comes out as a black area when scanned. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| トップへ戻る |
|
 |
ForenSeil
 登録日: 2011年4月15日 投稿: 2731 所在地: Kappeln, Schleswig-Holstein, Germany.
|
 投稿日時: 金 1月 25, 2013 6:52 pm 件名: |
|
 投稿日時: 金 1月 25, 2013 6:52 pm 件名: |
|
|
ForenSeil wrote:
| berraneck 氏の書き込み: |
| just first idea, do you keep temperature of all liquids about the same? I´ve seen some emulsion errors when washing temperature was too hot or too cool, but never this size |
This might be the problem
I doing the final wash a bit warmer for faster drying.
Thx! _________________ I'm not a collector, I'm a tester
My camera: Sony A7+Zeiss Sonnar 55/1.8
Current favourite lenses (I have many more):
A few macro-Tominons, Samyang 12/2.8, Noritsu 50.7/9.5, Rodagon 105/5.6 on bellows, Samyang 135/2, Celestron C8 2000mm F10
Most wanted: Samyang 24/1.4, Laowa 100/2.8 2x, Nikon 200/2 ED |
|
| トップへ戻る |
|
 |
spoilerhead
 登録日: 2012年1月25日 投稿: 68 所在地: ITaly
|
 投稿日時: 土 1月 26, 2013 10:00 am 件名: |
|
 投稿日時: 土 1月 26, 2013 10:00 am 件名: |
|
|
spoilerhead wrote:
| iangreenhalgh1 氏の書き込み: |
| themoleman342 氏の書き込み: |
| 引用: |
| had that once when two windings of the film touched on the development reel. |
Wouldn't that stop the developer from reaching the film, resulting in a dark spot? |
Yes, that is what happens. The emulsion remains on the neg and is opaque so comes out as a black area when scanned. |
um...
It forms a dark spot on the negative, what equals to a white spot on the positive. _________________ Eos (A/D) + M42 |
|
| トップへ戻る |
|
 |
themoleman342
 登録日: 2007年10月21日 投稿: 2190 所在地: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 投稿日時: 土 1月 26, 2013 1:51 pm 件名: |
|
 投稿日時: 土 1月 26, 2013 1:51 pm 件名: |
|
|
themoleman342 wrote:
| 引用: |
| It forms a dark spot on the negative, what equals to a white spot on the positive. |
I don't understand how that occurs than. Why would the film touching result in over-development in that spot? It should be the complete opposite. |
|
| トップへ戻る |
|
 |
spoilerhead
 登録日: 2012年1月25日 投稿: 68 所在地: ITaly
|
 投稿日時: 土 1月 26, 2013 2:30 pm 件名: |
|
 投稿日時: 土 1月 26, 2013 2:30 pm 件名: |
|
|
spoilerhead wrote:
| themoleman342 氏の書き込み: |
| 引用: |
| It forms a dark spot on the negative, what equals to a white spot on the positive. |
I don't understand how that occurs than. Why would the film touching result in over-development in that spot? It should be the complete opposite. |
I'ts not overdevelopment at all
If two windings touch nothing reaches the emulsion, including the fixer, so the actual emulsion stays on the film (the spot looks like undeveloped film). I've never seen it the other way around (touching while in developer and not touching while in fixer).
According to my experience this usually happens when a reel jams, and you use to much force to fix it. _________________ Eos (A/D) + M42 |
|
| トップへ戻る |
|
 |
themoleman342
 登録日: 2007年10月21日 投稿: 2190 所在地: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 投稿日時: 土 1月 26, 2013 3:02 pm 件名: |
|
 投稿日時: 土 1月 26, 2013 3:02 pm 件名: |
|
|
themoleman342 wrote:
Oh, I understand! Thanks for the clarification. |
|
| トップへ戻る |
|
 |
jimithing616
 登録日: 2013年3月27日 投稿: 63 所在地: Minneapolis, MN
|
 投稿日時: 土 4月 20, 2013 7:23 am 件名: |
|
 投稿日時: 土 4月 20, 2013 7:23 am 件名: |
|
|
jimithing616 wrote:
This, to me, looks like you are either rolling your film on the reel wrong and it is touching in those spots causing the stop, fix, whatever to stick and burn in like that... or your not washing well enough and the same is happening... also are you using powder developer? if so make sure there are no lumps in it... lumps could cause this. _________________ My Best Lenses (off the top of my head):
Konica UC 28mm 1.8 AR
Konica UC 80-200mm 4 AR x2
Konica 55mm 3.5 Macro w/Converter.
Minolta MD 24mm 2.8
Minolta MC 58mm 1.4
Minolta MD & MC 50 1.4
Vivitar 35mm 1.9 (minolta MD)
Canon FD 50mm 1.4 S.S.C. & FDn
Canon FD 24mm 2.8 S.S.C. & FDn
Canon FD 200mm 4 S.S.C
Canon FD 135 3.5 S.C. & FDn
Tamron Adaptall 2 24mm 2.5
Nikon AI-S 55mm 2.8 Macro
SMC Pentax-m 50mm 1.4
SMC Pentax-m 135 3.5
Spiratone Plura-Coat 28mm f/2 |
|
| トップへ戻る |
|
 |
jimithing616
 登録日: 2013年3月27日 投稿: 63 所在地: Minneapolis, MN
|
 投稿日時: 土 4月 20, 2013 7:25 am 件名: |
|
 投稿日時: 土 4月 20, 2013 7:25 am 件名: |
|
|
jimithing616 wrote:
In fact it kinda looks like there was absolutely NO emulsion there doesn't it... like it somehow was scratched away. _________________ My Best Lenses (off the top of my head):
Konica UC 28mm 1.8 AR
Konica UC 80-200mm 4 AR x2
Konica 55mm 3.5 Macro w/Converter.
Minolta MD 24mm 2.8
Minolta MC 58mm 1.4
Minolta MD & MC 50 1.4
Vivitar 35mm 1.9 (minolta MD)
Canon FD 50mm 1.4 S.S.C. & FDn
Canon FD 24mm 2.8 S.S.C. & FDn
Canon FD 200mm 4 S.S.C
Canon FD 135 3.5 S.C. & FDn
Tamron Adaptall 2 24mm 2.5
Nikon AI-S 55mm 2.8 Macro
SMC Pentax-m 50mm 1.4
SMC Pentax-m 135 3.5
Spiratone Plura-Coat 28mm f/2 |
|
| トップへ戻る |
|
 |
|
|
|
このフォーラムでは新しいトピックを投稿できません このフォーラムではトピックに返信できません このフォーラムでは自分の投稿を編集できません このフォーラムでは自分の投稿を削除できません このフォーラムでは投票に参加できません
|