| 前のトピックへ :: 次のトピックへ |
| 作成者 |
メッセージ |
f@tte
登録日: 2013年3月1日 投稿: 12
|
 投稿日時: 水 3月 06, 2013 5:01 pm 件名: Dead/Hot Pixel test Question |
|
 投稿日時: 水 3月 06, 2013 5:01 pm 件名: Dead/Hot Pixel test Question |
|
|
f@tte wrote:
I did a pixel test tonight using software Dead Pixel Test, with setting hot:60 and dead:250.
Result shown on below picture:
For example, last line on the right note paper means ISO=100, shutter=30s, hot pixel=2, dead=74
I did ISO 100 test again (on the right note) at the last of the test to double check.
There is at least two zero dead pixel on each ISO for different shutter setting. I am understand this as no FIX dead pixel on the camera. Am I correct? If I am right why is it so? Is the way I did the test reliable?
Machine for test: Canon 60D and Pentax 50MM 1.4 SMC |
|
| トップへ戻る |
|
 |
fotkino
 登録日: 2011年5月4日 投稿: 111 所在地: Russia, Moscow
|
 投稿日時: 水 3月 06, 2013 6:34 pm 件名: Re: Dead/Hot Pixel test Question |
|
 投稿日時: 水 3月 06, 2013 6:34 pm 件名: Re: Dead/Hot Pixel test Question |
|
|
fotkino wrote:
| f@tte 氏の書き込み: |
| I did a pixel test tonight using software Dead Pixel Test |
when you see a hot pixel, try to run the "sensor manual cleaning mode" from camera menu on a 15-20 sec. (I dont remove a lens).
during the "manual cleaning" camera is remaping bad pixel on a sensor and will close them itself.
camera brain apparently interpolates neighboring pixels, IMHO its work on all canon cameras, try _________________ _____________________________________
Sorry for my English |
|
| トップへ戻る |
|
 |
f@tte
登録日: 2013年3月1日 投稿: 12
|
 投稿日時: 水 3月 06, 2013 6:53 pm 件名: Re: Dead/Hot Pixel test Question |
|
 投稿日時: 水 3月 06, 2013 6:53 pm 件名: Re: Dead/Hot Pixel test Question |
|
|
f@tte wrote:
| fotkino 氏の書き込み: |
| f@tte 氏の書き込み: |
| I did a pixel test tonight using software Dead Pixel Test |
when you see a hot pixel, try to run the "sensor manual cleaning mode" from camera menu on a 15-20 sec. (I dont remove a lens).
during the "manual cleaning" camera is remaping bad pixel on a sensor and will close them itself.
camera brain apparently interpolates neighboring pixels, IMHO its work on all canon cameras, try |
I didn't realise that the camera is remaping bad pixel on the sensor in manual cleaning mode. Are you sure with it?
Anyway thank you for providing the info.
However it seems that for the same setting results are varied. It is hard to determine whether it gets improve or not? |
|
| トップへ戻る |
|
 |
fotkino
 登録日: 2011年5月4日 投稿: 111 所在地: Russia, Moscow
|
 投稿日時: 水 3月 06, 2013 7:05 pm 件名: Re: Dead/Hot Pixel test Question |
|
 投稿日時: 水 3月 06, 2013 7:05 pm 件名: Re: Dead/Hot Pixel test Question |
|
|
fotkino wrote:
| f@tte 氏の書き込み: |
I didn't realise that the camera is remaping bad pixel on the sensor in manual cleaning mode. Are you sure with it?
Anyway thank you for providing the info.
However it seems that for the same setting results are varied. It is hard to determine whether it gets improve or not? |
Yes, im 100% sure you can try this whith lens or whithout. Its a realy works with my 5D and 5DmkII.
And you can google "canon remaping hot pixel" and read about "manual cleaning mode" and remaping. _________________ _____________________________________
Sorry for my English |
|
| トップへ戻る |
|
 |
fotkino
 登録日: 2011年5月4日 投稿: 111 所在地: Russia, Moscow
|
 投稿日時: 水 3月 06, 2013 7:08 pm 件名: |
|
 投稿日時: 水 3月 06, 2013 7:08 pm 件名: |
|
|
fotkino wrote:
http://shmuliphoto.wordpress.com/2009/12/03/fix-hot-pixel-canon/ _________________ _____________________________________
Sorry for my English |
|
| トップへ戻る |
|
 |
f@tte
登録日: 2013年3月1日 投稿: 12
|
 投稿日時: 木 3月 07, 2013 3:40 am 件名: |
|
 投稿日時: 木 3月 07, 2013 3:40 am 件名: |
|
|
f@tte wrote:
| fotkino 氏の書き込み: |
| http://shmuliphoto.wordpress.com/2009/12/03/fix-hot-pixel-canon/ |
This is very helpful. Thank you! |
|
| トップへ戻る |
|
 |
|
|
|
このフォーラムでは新しいトピックを投稿できません このフォーラムではトピックに返信できません このフォーラムでは自分の投稿を編集できません このフォーラムでは自分の投稿を削除できません このフォーラムでは投票に参加できません
|