visualopsins
 登録日: 2009年3月5日 投稿: 11699 所在地: California
Expire: 2027-07-11
|
 投稿日時: 金 3月 26, 2010 1:09 am 件名: |
|
 投稿日時: 金 3月 26, 2010 1:09 am 件名: |
|
|
visualopsins wrote:
Watching this topic for replies...
Moire patterns show imperfectly mated surfaces. Cement acts as filler, to prevent/eliminate moire; maybe too much clamping pressure was applied, squeezing out too much cement leaving moire air gap.
Early cement is Canadian Balsam tree sap, melts at low temperature below water boil point, hard at ambient temperatures. Caution: heat lens glass very very slowly & evenly to avoid fracture.
Realignment is difficult without expensive tools; both axial & rotational alignment. I guess many of these were hand assembled originally, however, on an alignment jig. _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
Photomac
登録日: 2008年1月11日 投稿: 47 所在地: Sutton Benger, UK
|
 投稿日時: 土 3月 27, 2010 8:02 pm 件名: fixing cemented lenses |
|
 投稿日時: 土 3月 27, 2010 8:02 pm 件名: fixing cemented lenses |
|
|
Photomac wrote:
Hi there,
Split elements with methylene chloride (paint stripper, caustic) or Methyl Ethyl Ketone (MEK, toxic).
Clean with acetone.
Re-cement with Norland Optical Adhesive NOA61 - UV-curing (10 minutes on a window ledge in British summer sunshine!).
If elements are same diameter, use a small engineer's V-block to hold alignment.
Have fun!
Regards
Angus |
|