MFlenses - デジタル時代の新しさ
MFLenses 2026

マニュアルフォーカスレンズフォーラム

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。
スポットライト

フォーラムトップページのおすすめパートナー掲載。

Got a light meter, need an answer . . .
前のトピックへ :: 次のトピックへ  


Reply

Our discussions in the past about light meters came to fruition via eBay.

I got the following for what seems to be a decent price, and everyone says Gossen's a good make . . .
ここをクリックしてeBayで見る

The question I need to know is that it says "OPERATES ON TWO 625 BUTTON BATTERIES ". These can be alkaline (right?) or is it of the age of the dreaded mercury batteries - and does it even effect these?

Also are these guys intuitive or do I need to find a manual for it? (If so anybody know where to find one?)

Thanks,
Jim


Reply

There are replacements. I got one ot these: http://www.swedoffice.se/products-a-oe.php?id=11864
from a swedish office-supplier, think they must have been used in old calculators or something...


Reply

(the Yashica Minister D alos uses those batteries)


Reply

Jim, this page has useful info on the options for replacement PX625 cells.
http://www.smallbattery.company.org.uk/sbc_px625.htm?px625,various%20manufacturers,625PX
The original mercury oxide cells produced 1.35 volts but modern alkali and silver oxide cells output 1.5v, and the voltage of the alkali cells drops as the battery ages. Depending on the circuit design of the meter, variations in voltage could affect the needle position.

There are adapters available which take a modern 1.5v silver oxide cell and reduce the voltage to 1.35, which is the best option, but not cheap. I think your best course at first would be to get two MRB625 Wein-cells. You can probably find them cheaper on Ebay.


Reply

@ Jim:

Gossen make an adapter specifically for the Luna Pro/Lunasix meter that allows the use of two SR44 silver oxide cells to replace the original mercury cells.

http://www.bhphotovideo.com/c/product/89868-REG/Gossen_GO4145_Adapter_Kit_Battery_Holder_for.html

Initially expensive for what it is, but it works, and SR44 batteries are cheap and freely available.


Reply

Mike Butkus has the manual
http://butkus.org/chinon/flashes_meters/gossen_luna-pro/gossen_luna-pro.htm
It has a zero-ing screw, so you could use alkaline buttons, but you'd never be sure how stable it was and would have to zero it frequently as the alkalines aged. Better to go for the silver-oxide option - much more stable.


Reply

Silver oxide has a similar discharge rate to mercury.


Reply

bob955i 氏の書き込み:
Silver oxide has a similar discharge rate to mercury.


Exactly.


Reply

I think I remember going through this with my Contaflex126 and also rigging an adapter for my SRT200 so as to use the appropriate 1.4V hearing aid battery-which I have spares.
So this meter is from the time of the mercury oxide batteries Surprised (I thought it might be newer than that.

So that said . . .and if I understand correctly. . .
1- I can rig an adapter for the 1.4v hearing aid batteries and use that until I have better.
2- Unless I want to spend some cash on an adapter, I'll need to find a silver oxide substitute.
3- either way I'll need to adjust using the screw noted . . .

Here's another question since this is my first meter Embarassed
(I may come up with others)
So should the readings of the light meter match the readings from my TTL meter of my camera?

Thanks,
Jim


Reply

j.lukow 氏の書き込み:
I think I remember going through this with my Contaflex126 and also rigging an adapter for my SRT200 so as to use the appropriate 1.4V hearing aid battery-which I have spares.
So this meter is from the time of the mercury oxide batteries Surprised (I thought it might be newer than that.

So that said . . .and if I understand correctly. . .
1- I can rig an adapter for the 1.4v hearing aid batteries and use that until I have better.
2- Unless I want to spend some cash on an adapter, I'll need to find a silver oxide substitute.
3- either way I'll need to adjust using the screw noted . . .

Here's another question since this is my first meter Embarassed
(I may come up with others)
So should the readings of the light meter match the readings from my TTL meter of my camera?

Thanks,
Jim


Yes, to all 3 points above.
Yes, to the meter query - depending on how your camera meter is set up. If you have a center-weighted meter in the camera and point it at a subject you should get a very close reading to the Gossen if not using the diffuser.

The diffuser is for overall light falling on a subject and can give you a different reading, but depending on what exactly you want, that reading might suit your film/camera/mood/subject better. Leave the diffuser until later, but it's fun to mess around with.