 投稿日時: 木 7月 24, 2008 6:38 pm 件名: |
|
 投稿日時: 木 7月 24, 2008 6:38 pm 件名: |
|
|
peterqd wrote:
| F16SUNSHINE 氏の書き込み: |
Dakoo
This lens will need a non flanged adapter. It was designed for the later Pentax M42 cams like the Spotmatic F. These had an auto system that allowed open aperture metering. You should be able to sort something out or grind a flanged adapter down. The challenge is very similar to the one Sandie faces with the Yashinon 1.2/55. This is a great lens don't give up on it  |
Andy, for information my copy of this lens is the earlier version, Super Tak 1.4/50, without the open aperture system, and it also binds in two of my plain flanged adapters. I think it's just because of the fat rear element and the amount it protrudes. My flanged AF adapter works OK, the opening is a bit larger and allows the element to pass through while still keeping the pin pressed.
@ Dakoo - There are many plain M42/EOS adapters available that will work just fine. Here is one: ここをクリックしてeBayで見る, or if you're interested in the AF type I got mine from happypagehk. If you use the plain type you'll need to keep the A-M switch on manual. _________________ Peter - Moderator |