| 前のトピックへ :: 次のトピックへ |
| 作成者 |
メッセージ |
kiddo
 登録日: 2018年6月29日 投稿: 1630
|
 投稿日時: 木 5月 02, 2024 11:40 am 件名: very stubborn helicoid |
|
 投稿日時: 木 5月 02, 2024 11:40 am 件名: very stubborn helicoid |
|
|
kiddo wrote:
I've got this 1.4 DX yashinon very cheap because the lens was totally locked , I could open it all the way to the helicoid but this one it won't move at all. I've soaked it in acetone to see if it will release hopefully, but I do see lots of residue releasing, could it be some kind of glue? Just checked it out and it is some kind of very very sticky glue
. |
|
| トップへ戻る |
|
 |
RokkorDoctor
 登録日: 2021年11月27日 投稿: 1562 所在地: Kent, UK
Expire: 2025-05-01
|
 投稿日時: 木 5月 02, 2024 7:11 pm 件名: |
|
 投稿日時: 木 5月 02, 2024 7:11 pm 件名: |
|
|
RokkorDoctor wrote:
Well, if it releases and you can remove it all I think there's no need to worry about what it was.
Glue is unlikely but maybe a poor quality grease of which some of the components have polymerised/cross-linked due to long exposure to oxygen? Maybe one of our resident chemists can jump in here? (I am not a chemist but I have seen base oils separated out of helicoid grease turn into a sort of thin "plastic" film in old ROKKOR lenses, a film that even acetone has trouble removing)
EDIT: another (albeit unlikely) possibility is that the original grease had lithium stearate as a thickener (very common), and someone decided to "refresh" the grease by adding some polyurea-thickener-based grease. In general those two don't like each other very much and tend to harden when mixed, although there are exceptions. _________________ Mark
SONY A7S, A7RII + dust-sealed modded Novoflex/Fotodiox/Rayqual MD-NEX adapters
Minolta SR-1, SRT-101/303, XD7/XD11, XGM, X700
Bronica SQAi
Ricoh GX100
Minolta majority of all Rokkor SR/AR/MC/MD models made
Sigma 14mm/3.5 for SR mount
Tamron SP 60B 300mm/2.8 (Adaptall)
Samyang T-S 24mm/3.5 (Nikon mount, DIY converted to SR mount)
Schneider-Kreuznach PC-Super-Angulon 28mm/2.8 (SR mount)
Bronica PS 35/40/50/65/80/110/135/150/180/200/250mm |
|
| トップへ戻る |
|
 |
kiddo
 登録日: 2018年6月29日 投稿: 1630
|
 投稿日時: 木 5月 02, 2024 8:34 pm 件名: |
|
 投稿日時: 木 5月 02, 2024 8:34 pm 件名: |
|
|
kiddo wrote:
| RokkorDoctor 氏の書き込み: |
Well, if it releases and you can remove it all I think there's no need to worry about what it was.
Glue is unlikely but maybe a poor quality grease of which some of the components have polymerised/cross-linked due to long exposure to oxygen? Maybe one of our resident chemists can jump in here? (I am not a chemist but I have seen base oils separated out of helicoid grease turn into a sort of thin "plastic" film in old ROKKOR lenses, a film that even acetone has trouble removing)
EDIT: another (albeit unlikely) possibility is that the original grease had lithium stearate as a thickener (very common), and someone decided to "refresh" the grease by adding some polyurea-thickener-based grease. In general those two don't like each other very much and tend to harden when mixed, although there are exceptions. |
unfortunately it didn´t work , so i´m planning to soak it in gasoline to see the result , another option would be to heat it, but i´m not sure about it regardin alluminum and brass |
|
| トップへ戻る |
|
 |
Lloydy
 登録日: 2009年9月2日 投稿: 7880 所在地: Ironbridge. UK.
Expire: 2022-01-01
|
 投稿日時: 木 5月 02, 2024 10:50 pm 件名: |
|
 投稿日時: 木 5月 02, 2024 10:50 pm 件名: |
|
|
Lloydy wrote:
Boil it, the temperature won't hurt either metal and the different coefficient of thermal expansion at the same temperature should dislodge it. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| トップへ戻る |
|
 |
kiddo
 登録日: 2018年6月29日 投稿: 1630
|
 投稿日時: 火 5月 07, 2024 9:13 pm 件名: |
|
 投稿日時: 火 5月 07, 2024 9:13 pm 件名: |
|
|
kiddo wrote:
well , this very stubborn helicoid won´t realese after resting inside of gasoline, neither after heating it up , so ...i have to come out with new ideas |
|
| トップへ戻る |
|
 |
visualopsins
 登録日: 2009年3月5日 投稿: 11697 所在地: California
Expire: 2027-07-11
|
 投稿日時: 火 5月 07, 2024 10:58 pm 件名: |
|
 投稿日時: 火 5月 07, 2024 10:58 pm 件名: |
|
|
visualopsins wrote:
Tap tap tap...to free the jammed metal surfaces. slap it onto a hard flat surface. try sharp taps around the perimeter. use a tool to tap in direction of thread separation. drill some holes for more grip. But before all that have you tried using two strap wrenches? _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| トップへ戻る |
|
 |
kiddo
 登録日: 2018年6月29日 投稿: 1630
|
 投稿日時: 木 5月 09, 2024 2:10 pm 件名: |
|
 投稿日時: 木 5月 09, 2024 2:10 pm 件名: |
|
|
kiddo wrote:
I guess , I've used all the options available with no result, unfortunately. |
|
| トップへ戻る |
|
 |
Vercingetorix
登録日: 2024年5月31日 投稿: 2 所在地: The O.C.
|
 投稿日時: 金 5月 31, 2024 12:27 pm 件名: |
|
 投稿日時: 金 5月 31, 2024 12:27 pm 件名: |
|
|
Vercingetorix wrote:
I would try an ultrasonic cleaner. |
|
| トップへ戻る |
|
 |
DConvert
 登録日: 2010年6月12日 投稿: 984 所在地: Essex UK
|
 投稿日時: 金 5月 31, 2024 12:56 pm 件名: |
|
 投稿日時: 金 5月 31, 2024 12:56 pm 件名: |
|
|
DConvert wrote:
| kiddo 氏の書き込み: |
| I guess , I've used all the options available with no result, unfortunately. |
Both the solvents you've tried are organics that typically work well dissolving organic substances, but they won't be effective on inorganic materials.
So try leaving it in warm water for a while. This will dissolve many inorganics (such as salt). If you have access to an ultrasonics bath that will improve the cleaning from any solvent, but most people don't have one handy...
I take it there is no visual indication on a dent or other such deformation, if there is you're on a hiding to nothing. |
|
| トップへ戻る |
|
 |
kiddo
 登録日: 2018年6月29日 投稿: 1630
|
 投稿日時: 日 6月 02, 2024 8:04 pm 件名: |
|
 投稿日時: 日 6月 02, 2024 8:04 pm 件名: |
|
|
kiddo wrote:
| DConvert 氏の書き込み: |
| kiddo 氏の書き込み: |
| I guess , I've used all the options available with no result, unfortunately. |
Both the solvents you've tried are organics that typically work well dissolving organic substances, but they won't be effective on inorganic materials.
So try leaving it in warm water for a while. This will dissolve many inorganics (such as salt). If you have access to an ultrasonics bath that will improve the cleaning from any solvent, but most people don't have one handy...
I take it there is no visual indication on a dent or other such deformation, if there is you're on a hiding to nothing. |
thanks, i´ve tried that option with hot water with no luck neither |
|
| トップへ戻る |
|
 |
visualopsins
 登録日: 2009年3月5日 投稿: 11697 所在地: California
Expire: 2027-07-11
|
 投稿日時: 日 6月 02, 2024 8:19 pm 件名: |
|
 投稿日時: 日 6月 02, 2024 8:19 pm 件名: |
|
|
visualopsins wrote:
"on a hiding to nothing" I had to llok that up! LOL
https://www.phrases.org.uk/meanings/on-a-hiding-to-nothing.html
| 引用: |
To be faced with a situation which is pointless, as a successful outcome is impossible. This is usually expressed in terms of a sporting contest in which one of two outcomes is foreseen, either a hiding or nothing. The ‘to’ in the phrase indicates alternative outcomes, as in terms like ‘6 to 1‘ or ‘dollars to doughnuts‘.
The phrase has two applications. One scenario would be that of a team which is expected to win easily but has the betting odds so strongly in its favour that no kudos or reward, that is, ‘nothing’ , would be gained from victory. The other is that of a weak contestant who is expected to be beaten, that is, get ‘a hiding‘. |
_________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| トップへ戻る |
|
 |
kiddo
 登録日: 2018年6月29日 投稿: 1630
|
 投稿日時: 月 6月 03, 2024 7:54 pm 件名: |
|
 投稿日時: 月 6月 03, 2024 7:54 pm 件名: |
|
|
kiddo wrote:
no dents, neither deformation , so ´´hiding to nothing´´ still applying lol |
|
| トップへ戻る |
|
 |
Lloydy
 登録日: 2009年9月2日 投稿: 7880 所在地: Ironbridge. UK.
Expire: 2022-01-01
|
 投稿日時: 月 6月 03, 2024 11:01 pm 件名: |
|
 投稿日時: 月 6月 03, 2024 11:01 pm 件名: |
|
|
Lloydy wrote:
I spent many years as a Maintainence Fitter in the sewage treatment industry and seized pipe threads were an everyday problem. One of the tricks I used was to use a big heavy duty clamp and move it around the pipe joint and use enough pressure to distort the pipe joint slightly oval, and keep moving the clamp radially around the joint. The trick is to not permanently distort the pipe joint, just ovalize it enough that it springs back to round.
I would try a small woodworkers F clamp with plastic covered jaw faces, and just 'massage' the helicoid oval and let it spring back, and keep rotating it.
Start VERY LIGHTLY, it should move the two parts. I was using a bloody big clamp and forcing it tight with a length of pipe on the handle, it was brutal - but it worked in places I couldn't use a welding torch or a a BFH ( Big f*****g Hammer ) to achieve the same results. The method works, it's introducing movement into the seized thread. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| トップへ戻る |
|
 |
BrianSVP
 登録日: 2023年6月9日 投稿: 664 所在地: Philadelphia
|
 投稿日時: 木 12月 26, 2024 6:15 pm 件名: |
|
 投稿日時: 木 12月 26, 2024 6:15 pm 件名: |
|
|
BrianSVP wrote:
| Vercingetorix 氏の書き込み: |
| I would try an ultrasonic cleaner. |
Bumping an old thread, but want to say that this is the way.
I'd suggest Isopropyl alcohol solution (70%) with a bit of dish soap in it. Especially effective if your cleaner warms your medium. To avoid risk of fire, put the solvent mixture in a separate jar that is immersed in water in the ultrasonic cleaner.
This is very effective at removing both the oils and the the non-lipid fractions of lens grease from deep within the helical crevices |
|
| トップへ戻る |
|
 |
|
|