| 前のトピックへ :: 次のトピックへ |
| 作成者 |
メッセージ |
marcusBMG
 登録日: 2012年12月7日 投稿: 1392 所在地: Conwy N Wales
|
 投稿日時: 金 10月 24, 2014 11:02 pm 件名: Soligor 180mm 3.5 loose mount .... FIXED |
|
 投稿日時: 金 10月 24, 2014 11:02 pm 件名: Soligor 180mm 3.5 loose mount .... FIXED |
|
|
marcusBMG wrote:
i have just acquired this lens, its the chrome eared version 8xxx serial. problems: loose mount section, oily blades. Not clear how to disassemble this one. so far by loosening the grub screws on the focus ring I have managed to lose infinity focus...
There is another screw that I think provides access to a screw under the focus ring. No screws at the mount end.
Any ideas?
 _________________ pentax ME super (retired)
Pentax K3-ii; pentax K-S2; Samsung NX 20; Lumix G1 + adapters;
Adaptall collection (proliferating!) inc 200-500mm 31A, 300mm f2.8, 400mm f4.
Primes: takumar 55mm; smc 28mm, 50mm; kino/komine 28mm f2's, helios 58mm, Tamron Nestar 400mm, novoflex 400mm, Vivitar 135mm close focus, 105mm macro; Jupiter 11A; CZJ 135mm.
A classic zoom or two: VS1 (komine), Kiron Zoomlock...
最終編集: marcusBMG、水 10月 29, 2014 5:39 pm、計 2 回 |
|
| トップへ戻る |
|
 |
kansalliskala
 登録日: 2007年7月19日 投稿: 5122 所在地: Southern Finland countryside
Expire: 2016-12-30
|
 投稿日時: 土 10月 25, 2014 8:27 am 件名: |
|
 投稿日時: 土 10月 25, 2014 8:27 am 件名: |
|
|
kansalliskala wrote:
I think I have the same lens and same looseness problem. That one is missing the T-adapter, right? _________________ MF: Kodak DCS SLR/c; Samsung NX10; OM-10; Canon T50
Zuiko 28/3.5, Distagon 35/2.8; Yashica ML 50/2;
Zuiko 50/1.4; S-M-C 120/2.8; Zuiko 135/3.5; 200/5;
Tamron AD1 135/2.8, Soligor 180/3.5; Tamron AD1 300/5.6
Tamron zooms: 01A, Z-210
Yashicaflex C; Київ 4 + Юпитер 8, 11; Polaroid 100; Olympus XA; Yashica T3
Museum stuff: Certo-Phot; Tele-Edixon 135; Polaris 90-190; Asahi Bellows; Ixus IIs
Projects: Agfa Isolette III (no shutter), Canon AE-1D (no sensor),
Nikon D80 (dead), The "Peace Camera"
AF: Canon, Tokina, Sigma Video: JVC GZ-MG275E |
|
| トップへ戻る |
|
 |
marcusBMG
 登録日: 2012年12月7日 投稿: 1392 所在地: Conwy N Wales
|
 投稿日時: 土 10月 25, 2014 11:25 am 件名: |
|
 投稿日時: 土 10月 25, 2014 11:25 am 件名: |
|
|
marcusBMG wrote:
Yes I left off the t-mount for the pic.
Looking at the mount end there is a ring with two small holes in that look like they are for a custom spanner. It looks a bit like a bearing housing .. ?? _________________ pentax ME super (retired)
Pentax K3-ii; pentax K-S2; Samsung NX 20; Lumix G1 + adapters;
Adaptall collection (proliferating!) inc 200-500mm 31A, 300mm f2.8, 400mm f4.
Primes: takumar 55mm; smc 28mm, 50mm; kino/komine 28mm f2's, helios 58mm, Tamron Nestar 400mm, novoflex 400mm, Vivitar 135mm close focus, 105mm macro; Jupiter 11A; CZJ 135mm.
A classic zoom or two: VS1 (komine), Kiron Zoomlock... |
|
| トップへ戻る |
|
 |
guardian
 登録日: 2009年3月18日 投稿: 1750
|
 投稿日時: 土 10月 25, 2014 12:01 pm 件名: |
|
 投稿日時: 土 10月 25, 2014 12:01 pm 件名: |
|
|
guardian wrote:
Looseness between lens sections, including the mount, is something that's plagued me in the past. Sorry, I've no fix. I did post on this a while back, here:
http://forum.mflenses.com/broken-back-lenses-t65367,highlight,%2Bbroken+%2Bback.html
Doubt there's any help for you there. But you might want to read the thread anyway, just on background. |
|
| トップへ戻る |
|
 |
marcusBMG
 登録日: 2012年12月7日 投稿: 1392 所在地: Conwy N Wales
|
 投稿日時: 月 10月 27, 2014 10:12 pm 件名: Progress! |
|
 投稿日時: 月 10月 27, 2014 10:12 pm 件名: Progress! |
|
|
marcusBMG wrote:
I have now figured out:
1. fully extend the lens
2. loosen/remove the 3 grub screws on the focus sleeve and the sleeve can be pushed up exposing the three yellow screws one of which is circled in red.
Tightening these screws should fix the loose mount kansalliskala, guardian. Now I have to figure out how to separate the helicoid to clean it and the iris. There is leaking gunk all around the iris housing.
 _________________ pentax ME super (retired)
Pentax K3-ii; pentax K-S2; Samsung NX 20; Lumix G1 + adapters;
Adaptall collection (proliferating!) inc 200-500mm 31A, 300mm f2.8, 400mm f4.
Primes: takumar 55mm; smc 28mm, 50mm; kino/komine 28mm f2's, helios 58mm, Tamron Nestar 400mm, novoflex 400mm, Vivitar 135mm close focus, 105mm macro; Jupiter 11A; CZJ 135mm.
A classic zoom or two: VS1 (komine), Kiron Zoomlock...
最終編集: marcusBMG、水 10月 29, 2014 2:54 pm、計 1 回 |
|
| トップへ戻る |
|
 |
marcusBMG
 登録日: 2012年12月7日 投稿: 1392 所在地: Conwy N Wales
|
 投稿日時: 火 10月 28, 2014 10:13 pm 件名: Got this lens sussed |
|
 投稿日時: 火 10月 28, 2014 10:13 pm 件名: Got this lens sussed |
|
|
marcusBMG wrote:
Here is outline is how to fix a loose mount and access the iris on this soligor.
1. There are no screws on the mount end. There is instead a collar that needs a needle pointed lens spanner to unscrew. However unless there is a problem with the aperture rings there is no need to start disassembling the mount - it detaches as a unit.
2. To do so, locate the grub screw on the lens barrel above the focus sleeve, loosen it and now the front end of the lens can be unscrewed and separated. Note: may take some oomph to get started. Now loosen/remove the 3 grub screws on the focus sleeve, and a larger stop screw. The sleeve can now be slid up and off. The mount end is attached with 3 brass slotted screws. It is normally these screws that are loose if the mount is wobbly. Remove these and detach the mount.
3. To separate the helicoid, two wee guide rails are located in two slots. Remove these - 2 screws per rail. The helicoid can now be unscrewed completely. To clean the iris I removed the rear element and douched the whole assembly in solvent.
4. Reassembly is a simple reversal. To re-engage the helicoid I used the guide rail positions to align it, lining up with the slots. Resetting infinity focus was no problem. _________________ pentax ME super (retired)
Pentax K3-ii; pentax K-S2; Samsung NX 20; Lumix G1 + adapters;
Adaptall collection (proliferating!) inc 200-500mm 31A, 300mm f2.8, 400mm f4.
Primes: takumar 55mm; smc 28mm, 50mm; kino/komine 28mm f2's, helios 58mm, Tamron Nestar 400mm, novoflex 400mm, Vivitar 135mm close focus, 105mm macro; Jupiter 11A; CZJ 135mm.
A classic zoom or two: VS1 (komine), Kiron Zoomlock... |
|
| トップへ戻る |
|
 |
D1N0
 登録日: 2012年8月7日 投稿: 2726
|
 投稿日時: 月 9月 19, 2022 1:14 pm 件名: |
|
 投稿日時: 月 9月 19, 2022 1:14 pm 件名: |
|
|
D1N0 wrote:
Fixing the loose mount went well, Thanks. Mine isn't a T-mount Just M42 attached with three grub screws, no T-thread under there. _________________ pentaxian |
|
| トップへ戻る |
|
 |
philslizzy
 登録日: 2012年8月7日 投稿: 4753 所在地: Cheshire, England
|
 投稿日時: 月 9月 19, 2022 11:23 pm 件名: |
|
 投稿日時: 月 9月 19, 2022 11:23 pm 件名: |
|
|
philslizzy wrote:
| D1N0 氏の書き込み: |
| Fixing the loose mount went well, Thanks. Mine isn't a T-mount Just M42 attached with three grub screws, no T-thread under there. |
That will be a T mount (or T1) T2 had the screw. Some soviet lenses have a T1 mount like the Tair FS 300mm _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| トップへ戻る |
|
 |
|
|
|
このフォーラムでは新しいトピックを投稿できません このフォーラムではトピックに返信できません このフォーラムでは自分の投稿を編集できません このフォーラムでは自分の投稿を削除できません このフォーラムでは投票に参加できません
|