| 前のトピックへ :: 次のトピックへ |
| 作成者 |
メッセージ |
lulalake
 登録日: 2007年4月22日 投稿: 1191 所在地: Near Austin Texas
Expire: 2011-11-18
|
 投稿日時: 木 6月 19, 2008 1:54 am 件名: About Noise, Grain and Scanning |
|
 投稿日時: 木 6月 19, 2008 1:54 am 件名: About Noise, Grain and Scanning |
|
|
lulalake wrote:
This is what I do.
About the picture: It’s a long and kind of funny story, too long for this post so I’ll get to that in a different post.
Here’s the shot: It’s taken on a bright morning with Portra 800 ASA film, Jupiter-9 lens, I chose this speed film so I could get very fast exposures, They were shot from 1/350th to 1/1000th sec at F11- F22 depending on the lens. I used a Canon AL-1 QF with a M42 adapter. So I’m using a low contrast film, low contrast lens (with a yellowish color cast).
It was scanned on a Nikon Coolscan V ED at 4000 DPI. The original scan was “flat” with no tweaking other that manual focusing on the hair dryer in the fellow’s hand and resizing.
The Scanner comes with two pieces of software bundled in the Nikonscan software, Kodak ROC (restore original color)and GEM (Grain-Noise reduction software). These are my favorite grain noise reduction softwares.
Here’s a 100% blowup of the original shot, no tweaking
Next I show a scan with the color adjusted using ROC.
Then I show a scan with the color adjusted and the grain reduction software added.
Almost done:
I ALWAYS sharpen scans, “raw” scans are always a bit unsharp. I use The Light’s Right Studios sharpening scripts (not the actions). They are very useful and very subtle, one or two pixels wide sharpening and here is the result.
Here is the end result: (also spotted to remove processing dirt and dust)
The result is pretty subtle except for the color but the small enhancements work for me.
Cheers
Jules |
|
| トップへ戻る |
|
 |
Orio
登録日: 2007年2月24日 投稿: 29545 所在地: West Emilia
Expire: 2012-12-04
|
 投稿日時: 木 6月 19, 2008 2:04 am 件名: |
|
 投稿日時: 木 6月 19, 2008 2:04 am 件名: |
|
|
Orio wrote:
Very good noise reduction, indeed. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| トップへ戻る |
|
 |
lulalake
 登録日: 2007年4月22日 投稿: 1191 所在地: Near Austin Texas
Expire: 2011-11-18
|
 投稿日時: 木 6月 19, 2008 2:10 am 件名: |
|
 投稿日時: 木 6月 19, 2008 2:10 am 件名: |
|
|
lulalake wrote:
Thanks Orio,
You can google KODAK GEM (The noise grain reducer). There's a free trial download for the plug-in.
It seems Kodak was really going after film grain as it works very well on scanned images.
Jules |
|
| トップへ戻る |
|
 |
F16SUNSHINE
 登録日: 2007年8月20日 投稿: 5486 所在地: Left Coast
Expire: 2011-11-18
|
 投稿日時: 木 6月 19, 2008 2:11 am 件名: |
|
 投稿日時: 木 6月 19, 2008 2:11 am 件名: |
|
|
F16SUNSHINE wrote:
Nice post Jules. I will try your process as it looks quite effective. Maybe your friend should research a commercial sandblaster. Certainly it would be easier on the wifeys hairdryer  _________________ Moderator |
|
| トップへ戻る |
|
 |
lulalake
 登録日: 2007年4月22日 投稿: 1191 所在地: Near Austin Texas
Expire: 2011-11-18
|
 投稿日時: 木 6月 19, 2008 2:20 am 件名: |
|
 投稿日時: 木 6月 19, 2008 2:20 am 件名: |
|
|
lulalake wrote:
| F16SUNSHINE 氏の書き込み: |
Nice post Jules. I will try your process as it looks quite effective. Maybe your friend should research a commercial sandblaster. Certainly it would be easier on the wifeys hairdryer  |
LOL!, I'll post about what he's actually doing later.
Cheers
Jules |
|
| トップへ戻る |
|
 |
maddog10
 登録日: 2008年4月8日 投稿: 1072 所在地: Maryland, USA
Expire: 2015-02-12
|
 投稿日時: 木 6月 19, 2008 2:53 am 件名: |
|
 投稿日時: 木 6月 19, 2008 2:53 am 件名: |
|
|
maddog10 wrote:
I would like to see the full size, color corrected shot (before noise reduction). I am always afraid to do too much noise reduction, afraid I might reduce more than just noise.
Looks like an excellent result! _________________ Michael Hill |
|
| トップへ戻る |
|
 |
lulalake
 登録日: 2007年4月22日 投稿: 1191 所在地: Near Austin Texas
Expire: 2011-11-18
|
 投稿日時: 木 6月 19, 2008 4:22 am 件名: |
|
 投稿日時: 木 6月 19, 2008 4:22 am 件名: |
|
|
lulalake wrote:
Thanks Michael,
Sure. Here it is color corrected full size no noise reduction. (Converted to .jpg from .tif)
http://tinyurl.com/4nqkjg
I'll leave it up for a while. It's biiiig 4.5 megs
Jules |
|
| トップへ戻る |
|
 |
maddog10
 登録日: 2008年4月8日 投稿: 1072 所在地: Maryland, USA
Expire: 2015-02-12
|
 投稿日時: 木 6月 19, 2008 9:52 am 件名: |
|
 投稿日時: 木 6月 19, 2008 9:52 am 件名: |
|
|
maddog10 wrote:
Thanks Jules.
I just wanted to see if noise reduction would even be needed. The color correction is the main thing that was need for the photo. I like the version without the noise reduction, but I can see where a slight reduction can make an improvement. Thanks for posting this series. _________________ Michael Hill |
|
| トップへ戻る |
|
 |
lulalake
 登録日: 2007年4月22日 投稿: 1191 所在地: Near Austin Texas
Expire: 2011-11-18
|
 投稿日時: 木 6月 19, 2008 1:35 pm 件名: |
|
 投稿日時: 木 6月 19, 2008 1:35 pm 件名: |
|
|
lulalake wrote:
| maddog10 氏の書き込み: |
Thanks Jules.
I just wanted to see if noise reduction would even be needed. The color correction is the main thing that was need for the photo. I like the version without the noise reduction, but I can see where a slight reduction can make an improvement. Thanks for posting this series. |
Thanks Michael,
In the Nikonscan software the GEM noise reduction is a cut-down version of the actual Kodak GEM plug in. There is only an "amount" (0 to 4 option).
I noise reduced it at "4", the most possible in order to show the max that one can get.
Another technique I use is to make a copy of the "raw" file, apply the noise reduction, copy the noise reduced version to the original version on a layer then only paint in the sections that I feel need noise reduction.
Noise/Grain tends to give apparent detail and some places need that detail where others don't like skies etc.
I didn't do that to the "final" version that I posted but when I do the actual final copy, I will. (I agree there are areas that need more "detail" in the final version.)
Cheers
Jules |
|
| トップへ戻る |
|
 |
|
|
|
このフォーラムでは新しいトピックを投稿できません このフォーラムではトピックに返信できません このフォーラムでは自分の投稿を編集できません このフォーラムでは自分の投稿を削除できません このフォーラムでは投票に参加できません
|