| 前のトピックへ :: 次のトピックへ |
| 作成者 |
メッセージ |
DigiChromeEd
 登録日: 2009年12月29日 投稿: 3468 所在地: Northern Ireland
|
 投稿日時: 土 4月 13, 2019 12:01 pm 件名: Konica FT-1 motor shutter problem? |
|
 投稿日時: 土 4月 13, 2019 12:01 pm 件名: Konica FT-1 motor shutter problem? |
|
|
DigiChromeEd wrote:
I have a Konica FT-1 motor SLR which has developed a shutter problem. What is happening is this:-
When I release the shutter at any speed the shutter opens, the mirror lifts and the motor winds the film on to the next frame. In order for the shutter to close and the mirror to return I have to activate the shutter button five or six times which winds the film on each time.
I know the electronics in these cameras are unreliable but can anyone point me in the direction of what the fault may be?
The camera body itself is in mint condition and if possible would like to be able to continue using it with my collection of Hexanon lenses. _________________ "I've got a Nikon camera, I like to take a photograph" - Paul Simon |
|
| トップへ戻る |
|
 |
kansalliskala
 登録日: 2007年7月19日 投稿: 5122 所在地: Southern Finland countryside
Expire: 2016-12-30
|
 投稿日時: 日 4月 14, 2019 7:43 am 件名: |
|
 投稿日時: 日 4月 14, 2019 7:43 am 件名: |
|
|
kansalliskala wrote:
Have you looked at the three flat cables that connect the electric boards under the top cover. They seem to be the most common cause of problems. Foam insulation that is under the flat metal connector turns into gel and cause unexplained behaviour.
https://www.flickr.com/photos/15235665@N04/sets/72157623203627474/ _________________ MF: Kodak DCS SLR/c; Samsung NX10; OM-10; Canon T50
Zuiko 28/3.5, Distagon 35/2.8; Yashica ML 50/2;
Zuiko 50/1.4; S-M-C 120/2.8; Zuiko 135/3.5; 200/5;
Tamron AD1 135/2.8, Soligor 180/3.5; Tamron AD1 300/5.6
Tamron zooms: 01A, Z-210
Yashicaflex C; Київ 4 + Юпитер 8, 11; Polaroid 100; Olympus XA; Yashica T3
Museum stuff: Certo-Phot; Tele-Edixon 135; Polaris 90-190; Asahi Bellows; Ixus IIs
Projects: Agfa Isolette III (no shutter), Canon AE-1D (no sensor),
Nikon D80 (dead), The "Peace Camera"
AF: Canon, Tokina, Sigma Video: JVC GZ-MG275E |
|
| トップへ戻る |
|
 |
DigiChromeEd
 登録日: 2009年12月29日 投稿: 3468 所在地: Northern Ireland
|
 投稿日時: 日 4月 14, 2019 9:48 am 件名: |
|
 投稿日時: 日 4月 14, 2019 9:48 am 件名: |
|
|
DigiChromeEd wrote:
| kansalliskala 氏の書き込み: |
Have you looked at the three flat cables that connect the electric boards under the top cover. They seem to be the most common cause of problems. Foam insulation that is under the flat metal connector turns into gel and cause unexplained behaviour.
https://www.flickr.com/photos/15235665@N04/sets/72157623203627474/ |
I haven't ventured inside the camera yet but I have seen the flickr page in your link recently. What should I use to replace the original foam insulation with? _________________ "I've got a Nikon camera, I like to take a photograph" - Paul Simon |
|
| トップへ戻る |
|
 |
Gardener
 登録日: 2013年9月22日 投稿: 949 所在地: USA
|
 投稿日時: 日 4月 14, 2019 3:05 pm 件名: |
|
 投稿日時: 日 4月 14, 2019 3:05 pm 件名: |
|
|
Gardener wrote:
Things like that are usually an electrical failure, a short or a disconnect. Without a repair manual it might be very hard to find out what and where exactly. Even with it in hands it often times is not possible. |
|
| トップへ戻る |
|
 |
DigiChromeEd
 登録日: 2009年12月29日 投稿: 3468 所在地: Northern Ireland
|
 投稿日時: 水 4月 24, 2019 1:47 pm 件名: |
|
 投稿日時: 水 4月 24, 2019 1:47 pm 件名: |
|
|
DigiChromeEd wrote:
| Gardener 氏の書き込み: |
| Things like that are usually an electrical failure, a short or a disconnect. Without a repair manual it might be very hard to find out what and where exactly. Even with it in hands it often times is not possible. |
 _________________ "I've got a Nikon camera, I like to take a photograph" - Paul Simon |
|
| トップへ戻る |
|
 |
kansalliskala
 登録日: 2007年7月19日 投稿: 5122 所在地: Southern Finland countryside
Expire: 2016-12-30
|
 投稿日時: 木 4月 25, 2019 6:50 am 件名: |
|
 投稿日時: 木 4月 25, 2019 6:50 am 件名: |
|
|
kansalliskala wrote:
| DigiChromeEd 氏の書き込み: |
| kansalliskala 氏の書き込み: |
Have you looked at the three flat cables that connect the electric boards under the top cover. They seem to be the most common cause of problems. Foam insulation that is under the flat metal connector turns into gel and cause unexplained behaviour.
https://www.flickr.com/photos/15235665@N04/sets/72157623203627474/ |
I haven't ventured inside the camera yet but I have seen the flickr page in your link recently. What should I use to replace the original foam insulation with? |
Did you try it? I used a vinyl floor rubber noise insulation canvas (? ). I have about 20 meter roll of it and needed only 1 cm x 2 cm piece. Any thin rubber should go I think.
edit: I found it, this exactly, very good material for almost everything
https://professionals.tarkett.com/en_EU/collection-C001442-acoustic-comfort-underlayer/tarkomfort-premium _________________ MF: Kodak DCS SLR/c; Samsung NX10; OM-10; Canon T50
Zuiko 28/3.5, Distagon 35/2.8; Yashica ML 50/2;
Zuiko 50/1.4; S-M-C 120/2.8; Zuiko 135/3.5; 200/5;
Tamron AD1 135/2.8, Soligor 180/3.5; Tamron AD1 300/5.6
Tamron zooms: 01A, Z-210
Yashicaflex C; Київ 4 + Юпитер 8, 11; Polaroid 100; Olympus XA; Yashica T3
Museum stuff: Certo-Phot; Tele-Edixon 135; Polaris 90-190; Asahi Bellows; Ixus IIs
Projects: Agfa Isolette III (no shutter), Canon AE-1D (no sensor),
Nikon D80 (dead), The "Peace Camera"
AF: Canon, Tokina, Sigma Video: JVC GZ-MG275E |
|
| トップへ戻る |
|
 |
|
|
|
このフォーラムでは新しいトピックを投稿できません このフォーラムではトピックに返信できません このフォーラムでは自分の投稿を編集できません このフォーラムでは自分の投稿を削除できません このフォーラムでは投票に参加できません
|