| 前のトピックへ :: 次のトピックへ |
| 作成者 |
メッセージ |
Lloydy
 登録日: 2009年9月2日 投稿: 7880 所在地: Ironbridge. UK.
Expire: 2022-01-01
|
 投稿日時: 月 10月 14, 2013 10:14 pm 件名: Meyer-Optik. Orestegor 200 / aperture problem. |
|
 投稿日時: 月 10月 14, 2013 10:14 pm 件名: Meyer-Optik. Orestegor 200 / aperture problem. |
|
|
Lloydy wrote:
I picked a nice M-O Gorlitz Orestegor , spotless glass and a very nice body. But I don't think the aperture closes down to its smallest position.
I know how the pre set stop down aperture works, lifting the spring loaded ring to set the required aperture etc. But the f stop indicator numbers seem out of sync' with the actual aperture.
The aperture blades will open fully, I can see that they fully retract - this must be the f4 position, but the ring indicates just below f5.6.
Go the other way to fully closed the ring indicates f22, which is as far as the ring should go, but the aperture blades seem to be a bit wide for f22 - if you look at the picture below the blades are as closed as they will go and the ring says f22. Does that look like f22? If someone else has one of these lenses I would like to see a picture of the correct f22 on the blades.
I think the spring loaded stop down pre set ring has slipped, but I can't see how to remove it to adjust it. Any thoughts on adjusting it would be great.
 _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| トップへ戻る |
|
 |
Gonzoo
 登録日: 2010年3月29日 投稿: 231
|
 投稿日時: 水 10月 16, 2013 3:30 pm 件名: |
|
 投稿日時: 水 10月 16, 2013 3:30 pm 件名: |
|
|
Gonzoo wrote:
AFAIK you can limit the aperture ring movement to a certain range (e.g. wide open to f8 ). I think your lens is limited to an aperture between 16 and 22. You can (un)do that limitation by lifting the aperture ring towards the front ring and turning it. _________________ Canon 5d | Exa 500 | Pentacon Six + too much lenses  |
|
| トップへ戻る |
|
 |
Lloydy
 登録日: 2009年9月2日 投稿: 7880 所在地: Ironbridge. UK.
Expire: 2022-01-01
|
 投稿日時: 水 10月 16, 2013 4:31 pm 件名: |
|
 投稿日時: 水 10月 16, 2013 4:31 pm 件名: |
|
|
Lloydy wrote:
| Gonzoo 氏の書き込み: |
| AFAIK you can limit the aperture ring movement to a certain range (e.g. wide open to f8 ). I think your lens is limited to an aperture between 16 and 22. You can (un)do that limitation by lifting the aperture ring towards the front ring and turning it. |
Yes, it does that, that's the way the 'stop down' works. But on this lens the ring seems to have slipped in relation to the actual aperture of the blades. The blades will open right up but the ring shows about 5.6 instead of 4. And the other way the ring shows 22 but I don't think it is 22 at the blades.
If you've got one of these lenses Gonzoo I would be very happy if you could look and see if f22 on yours is anything like the picture above. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| トップへ戻る |
|
 |
Gonzoo
 登録日: 2010年3月29日 投稿: 231
|
 投稿日時: 木 10月 17, 2013 4:43 am 件名: |
|
 投稿日時: 木 10月 17, 2013 4:43 am 件名: |
|
|
Gonzoo wrote:
F22 has a smaller opening definitely. The apterture ring is disassembled from the front in a few steps, should be easy to repair. _________________ Canon 5d | Exa 500 | Pentacon Six + too much lenses  |
|
| トップへ戻る |
|
 |
Excalibur
 登録日: 2009年7月19日 投稿: 5018 所在地: UK
Expire: 2014-04-21
|
 投稿日時: 木 10月 17, 2013 8:03 am 件名: |
|
 投稿日時: 木 10月 17, 2013 8:03 am 件名: |
|
|
Excalibur wrote:
| Gonzoo 氏の書き込み: |
| F22 has a smaller opening definitely. The apterture ring is disassembled from the front in a few steps, should be easy to repair. |
Agreed f22 is smaller, on my one a blade had come out (so got it cheap) well I managed to hook it back into position. _________________ Canon A1, AV1, T70 & T90, EOS 300 and EOS300v, Chinon CE and CP-7M. Contax 139, Fuji STX-2, Konica Autoreflex TC, FS-1, FT-1, Minolta X-700, X-300, XD-11, SRT101b, Nikon EM, FM, F4, F90X, Olympus OM2, Pentax S3, Spotmatic, Pentax ME super, Praktica TL 5B, & BC1, , Ricoh KR10super, Yashica T5D, Bronica Etrs, Mamiya RB67 pro AND drum roll:- a Sony Nex 3
.........past gear Tele Rolleiflex and Rollei SL66.
Many lenses from good to excellent. |
|
| トップへ戻る |
|
 |
Lloydy
 登録日: 2009年9月2日 投稿: 7880 所在地: Ironbridge. UK.
Expire: 2022-01-01
|
 投稿日時: 日 11月 24, 2013 9:47 pm 件名: |
|
 投稿日時: 日 11月 24, 2013 9:47 pm 件名: |
|
|
Lloydy wrote:
I was so pleased with this lens, I've had it a while but not used it because it is Exacta mount, then I got the Pentacon 135 in M42 and the factory adapter is interchangeable between the two lenses. I only noticed this last night, so I took the Orestegor out today and tried it, and I loved it. But tonight disaster struck, when I took the lens off, and turned the aperture ring to admire the lovely circle of the blades - one came off!
so now I have got to dismantle the lens and repair the aperture mechanism completely. I could live with the aperture not closing fully which was the known fault. At least it opened fully, or maybe even opened a bit too far?
Anyway, it's got to be fixed. So how does it come apart? I've had the front name ring off and all I can see is another optical clamp ring. So I'm guessing the optics have to be removed from the front to get at the mechanicals? All help and advice is gratefully recieved, I really want this lens working again.
edit....
I've just looked at the pictures I took this afternoon, late in the rain. This was wide open, straight out of the camera. I am oficially pissed off now!
 _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| トップへ戻る |
|
 |
Lloydy
 登録日: 2009年9月2日 投稿: 7880 所在地: Ironbridge. UK.
Expire: 2022-01-01
|
 投稿日時: 月 11月 25, 2013 12:00 am 件名: |
|
 投稿日時: 月 11月 25, 2013 12:00 am 件名: |
|
|
Lloydy wrote:
It didn't cost me very much, so I went in and had a go at it. The front glass all came out easy enough, but I can't for the life of me get the body apart to get at the stupid aperture ring!
But while I was in there I figured out that one blade had jumped out, and there was no way it was going back in the empty slot, where the pin rides and is just visible in the picture. A closer inspection determined that 6 blades had jumped one slot and had to be moved back in to place then the stray blade could be returned to its right place. It was a fiddle, but the dental style picks proved invaluable and they were all carefully prised back into position. And it works, except for the original problem. I think the blades jumping was oil on the blades, so they've been cleaned with nail polish remover.
And I got the glass back in in the right order, that's good enough for infinity!
 _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| トップへ戻る |
|
 |
Gonzoo
 登録日: 2010年3月29日 投稿: 231
|
 投稿日時: 木 12月 12, 2013 12:01 pm 件名: |
|
 投稿日時: 木 12月 12, 2013 12:01 pm 件名: |
|
|
Gonzoo wrote:
| Lloydy 氏の書き込み: |
| but I can't for the life of me get the body apart to get at the stupid aperture ring! |
Iirc you just unscrew the two lens parts. There might be a tiny screw preventing the "just". Since the Pentacon 135 is very similar to the 200 in terms of disassembly take a look: It's the one marked with (9a) in this guide: http://frozenfate.blogspot.de/2010/08/disassembly-guide-for-pentacon-135mm.html _________________ Canon 5d | Exa 500 | Pentacon Six + too much lenses  |
|
| トップへ戻る |
|
 |
zoran.rilak
登録日: 2018年6月12日 投稿: 1
|
 投稿日時: 火 6月 12, 2018 2:13 pm 件名: |
|
 投稿日時: 火 6月 12, 2018 2:13 pm 件名: |
|
|
zoran.rilak wrote:
Almost five years later but hey, maybe somebody will find this useful.
Lloydy, your issue is that all of your aperture blades have slipped forward by one notch. That is why you're not getting the smallest aperture at f/22 (blades don't close enough from being too forward) and also why you are seeing max aperture at around f/5.6 (blades retract too soon, again from being too forward). To fix, just push one blade out by unhooking its pin, then unhook and slide all the blades back by one slot in counterclockwise direction.
In my experience, Orestegors' apertures are flimsy affairs that will fall out especially easily at f/8 if the lens is shaken or hit. I've fixed two with the exact same problem as you describe. |
|
| トップへ戻る |
|
 |
|
|
|
このフォーラムでは新しいトピックを投稿できません このフォーラムではトピックに返信できません このフォーラムでは自分の投稿を編集できません このフォーラムでは自分の投稿を削除できません このフォーラムでは投票に参加できません
|