MFlenses - デジタル時代の新しさ
MFLenses 2026

マニュアルフォーカスレンズフォーラム

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。
スポットライト

フォーラムトップページのおすすめパートナー掲載。

Pentacon 4/200 disassembled (mostly).
前のトピックへ :: 次のトピックへ  


Reply

I disassembled in order to fix a popped iris leaf, so there was no need to remove the front elements from their housing, or split the focusing helical. But other than that this is the lens in its constituent parts, so I thought it might be helpful to someone in the future. This is what it takes to get to the diaphragm. You start at the mount and work your way to the other end until there's nothing left to strip down. The iris is the last thing to be revealed when stripping this lens down. On a plus note, it was as straightforward a process as was indicated by a 'how to' I found on the net, posted by another owner.





The culprit -



I cupped my hand in order to catch the shower of leaves I expected when I tipped the diaphragm holder over... and three lumps of five leaves thudded into my hand. So it looks like it's been longer than I remember since I last used it. I found the individual leaves to be pretty much pristine, but they did require a fingernail to ping them all apart. The internet seems to agree on washing them in soapy water, I'm guessing hand soap, as dishwashing soap usually contains salts. If anyone has any other ideas on cleaning I'd appreciate it. It's the first time I've tried to clean and reassemble an iris diaphragm.


Reply

I would use alcohol and not water to clean it, acetone if it is too sticky.


Reply

kds315* 氏の書き込み:
I would use alcohol and not water to clean it, acetone if it is too sticky.


Thanks kds.


Reply

kds315* 氏の書き込み:
I would use alcohol and not water to clean it, acetone if it is too sticky.


Not acetone IMO - too agressive, liable to dissolve surface finish.
If oily, naphtha/coleman fuel/similar is the choice.


Reply

marcusBMG 氏の書き込み:
kds315* 氏の書き込み:
I would use alcohol and not water to clean it, acetone if it is too sticky.


Not acetone IMO - too agressive, liable to dissolve surface finish.
If oily, naphtha/coleman fuel/similar is the choice.


Yes, there's definitely a uniform 'blueing' to the blades, which I remember from days gone by is a method of protection. I've not actually cleaned them yet as it's on hold until I can work out how to put the focussing assembly (incl helical) back together. I'd left it alone, then in a fit of madness decided what could go wrong! *sigh*. I'll never learn.

I'd plumped for using white spirit, which is a naptha I think. I didn't think hand soap would guarantee removing the oil (grease I suspect) and I don't like the idea of using dishwashing soap.