| 前のトピックへ :: 次のトピックへ |
| 作成者 |
メッセージ |
montecarlo
 登録日: 2007年4月4日 投稿: 1865 所在地: Romania
|
 投稿日時: 火 6月 03, 2008 2:39 pm 件名: Petri camera |
|
 投稿日時: 火 6月 03, 2008 2:39 pm 件名: Petri camera |
|
|
montecarlo wrote:
I bought last week a new old camera with kit lens : Petri GX-1 with Petri 50mm f:2.0 lens (similar with this one http://kitatoma.pepo.jp/hobby_room/1_camera/PETRI_GX-1.htm ).
Its a simple camera, a mechanical one, and battery powers only the light meter. In the place of the needle you can found three coloured leds.
In fact its made by Cosina (a CT-1/A model) and is marketed under many labels like :
Hanimex DR-1 , Soligor SC-1 , Exakta HS-1 , Miranda MS-1
I'll test the lens . Might be the same as this : http://www.pbase.com/steephill/image/38667505 . Regarding it the Petri/Cosinon should outperform the similar Pentax-M 50mm f:2.0 http://www.pbase.com/steephill/image/38540084
(the decentering issie could be a copy problem (?) ) and wide open even the Ricoh/Rikenon one.
Now, I don't know which one to keep : the Petri or the Luxon MC 50mm f:2.0, an another cheap lens, a chinese copy of the Pentax-M 50mm f:2.0 lens ( http://forum.mflenses.com/chinese-pentax-lens-andcamera-clone-t4907.html ) _________________ Canonet QL17 III
Zenit E , Helios-44 58mm f:2.0 , Tair-11A 135mm f:2.8, Jupiter-9 85mm f:2.0,
Carl Zeiss Jena Flektogon 35mm f:2.4
Pentax MX, ME Super, Chinon CE4/CM4, Petri MC 28mm f:2, smc Pentax-M 50mm f:1.7, Soligor T 135mm f:2.8
Minolta X500, Tokina 28/2.8, Rokkor 50/1.7, 80-205/4.5
Nikon D90, Nikkor 35/2.0, Nikkor 50/1.8, Sigma 24/2.8, Nikkor 18-105 VR |
|
| トップへ戻る |
|
 |
luisalegria
 登録日: 2008年3月7日 投稿: 6602 所在地: San Francisco, USA
Expire: 2018-01-18
|
 投稿日時: 火 6月 03, 2008 3:56 pm 件名: |
|
 投稿日時: 火 6月 03, 2008 3:56 pm 件名: |
|
|
luisalegria wrote:
Good thing it is a late-model Petri - Cosina. The older ones were made by Petri and had a unique lens mount and a generally poor reputation. _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| トップへ戻る |
|
 |
Canuck Curt
登録日: 2008年5月16日 投稿: 7 所在地: Northern Ontario Canada
|
 投稿日時: 火 6月 03, 2008 4:05 pm 件名: |
|
 投稿日時: 火 6月 03, 2008 4:05 pm 件名: |
|
|
Canuck Curt wrote:
Sounds interesting. I have this camera under the Cosina CT-1/A and Miranda MS-1 versions. My luck has been the opposite with Petri SLR's, my old Petriflex V3's work well but every time I buy an FT, FT1000 or Carena SRH 1000 it doesn't work or the lens mechanism is frozen solid. No problems with most Petri rangefinder cameras, just their M42 equipment hates me, LOL. _________________ When old cameras have nowhere else to go, my doors are always open to them. |
|
| トップへ戻る |
|
 |
Farside
 登録日: 2007年9月1日 投稿: 6579 所在地: Ireland
Expire: 2013-12-27
|
 投稿日時: 火 6月 03, 2008 4:05 pm 件名: |
|
 投稿日時: 火 6月 03, 2008 4:05 pm 件名: |
|
|
Farside wrote:
| luisalegria 氏の書き込み: |
| Good thing it is a late-model Petri - Cosina. The older ones were made by Petri and had a unique lens mount and a generally poor reputation. |
Indeed. I bought a Petri 50/2 in a bundle some months ago, not knowing what mount it had - turned out ok, having the PK mount. The seller listed it wrongly as a 1.2, but I was sure sure Petri never offered one of those, so I wasn't expecting anything but what I got. You can imagine the whoopin' and hollerin' if it actually had turned out to be one, though.  _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| トップへ戻る |
|
 |
newton
 登録日: 2011年3月10日 投稿: 343 所在地: USA
|
 投稿日時: 木 4月 07, 2011 11:54 pm 件名: |
|
 投稿日時: 木 4月 07, 2011 11:54 pm 件名: |
|
|
newton wrote:
I bought a Petri FT. I do not know what I just bought. Any advice on this camera. It comes with a 50 mm and a 135 mm, lenses which I already own in M42 and PK mounts. This may allow me to use my Petri lenses on a Petri body. Where did you get your PK adapters for digital? Is this a good camera? I think I should have saved my money.  |
|
| トップへ戻る |
|
 |
newton
 登録日: 2011年3月10日 投稿: 343 所在地: USA
|
 投稿日時: 金 4月 08, 2011 12:51 am 件名: |
|
 投稿日時: 金 4月 08, 2011 12:51 am 件名: |
|
|
newton wrote:
Here are some new pictures taken by someone else on the photo.net site from this Petri FT camera. I am wondering what people think.
http://photo.net/classic-cameras-forum/00YSo3
Here is a link explaining the differences between the different camera bodies made by this peculiar Japanese company: Kuribayashi Camera Industry Inc. or Petri Camera Co., Inc. (Japan)
http://www.thecamerasite.net/02_Rangefinders/Pages/petrit.htm |
|
| トップへ戻る |
|
 |
drosales
登録日: 2011年12月8日 投稿: 7
|
 投稿日時: 木 12月 08, 2011 6:21 pm 件名: HOW DO I REMOVE FOCUSING SCREEN FROM PETRI FT EE? |
|
 投稿日時: 木 12月 08, 2011 6:21 pm 件名: HOW DO I REMOVE FOCUSING SCREEN FROM PETRI FT EE? |
|
|
drosales wrote:
I actually have 2 questions:
1. Is it possible to remove the focusing screen & condenser lens on a Petri FT EE for cleaning without taking the camera apart?
2. Will diluted rubbing alcohol be OK for cleaning the aforementioned parts, or it stain them?
A replies would be greatly appreciated!
D. Rosales |
|
| トップへ戻る |
|
 |
Excalibur
 登録日: 2009年7月19日 投稿: 5018 所在地: UK
Expire: 2014-04-21
|
 投稿日時: 木 12月 08, 2011 7:21 pm 件名: |
|
 投稿日時: 木 12月 08, 2011 7:21 pm 件名: |
|
|
Excalibur wrote:
| luisalegria 氏の書き込み: |
| Good thing it is a late-model Petri - Cosina. The older ones were made by Petri and had a unique lens mount and a generally poor reputation. |
The MF1 was/is M42 and as small as an Olympus OM10........I quite liked it although it felt cheap, but couldn't cure a light leak so will probably break it up for spare screws. _________________ Canon A1, AV1, T70 & T90, EOS 300 and EOS300v, Chinon CE and CP-7M. Contax 139, Fuji STX-2, Konica Autoreflex TC, FS-1, FT-1, Minolta X-700, X-300, XD-11, SRT101b, Nikon EM, FM, F4, F90X, Olympus OM2, Pentax S3, Spotmatic, Pentax ME super, Praktica TL 5B, & BC1, , Ricoh KR10super, Yashica T5D, Bronica Etrs, Mamiya RB67 pro AND drum roll:- a Sony Nex 3
.........past gear Tele Rolleiflex and Rollei SL66.
Many lenses from good to excellent. |
|
| トップへ戻る |
|
 |
scsambrook
 登録日: 2009年3月29日 投稿: 2167 所在地: Glasgow Scotland
Expire: 2011-11-18
|
 投稿日時: 木 12月 08, 2011 7:36 pm 件名: Re: HOW DO I REMOVE FOCUSING SCREEN FROM PETRI FT EE? |
|
 投稿日時: 木 12月 08, 2011 7:36 pm 件名: Re: HOW DO I REMOVE FOCUSING SCREEN FROM PETRI FT EE? |
|
|
scsambrook wrote:
| drosales 氏の書き込み: |
I actually have 2 questions:
1. Is it possible to remove the focusing screen & condenser lens on a Petri FT EE for cleaning without taking the camera apart?
2. Will diluted rubbing alcohol be OK for cleaning the aforementioned parts, or it stain them?
A replies would be greatly appreciated!
D. Rosales |
I'm sure there's no user-access to the screen on the FT-EE. But if you do get it out, take care what you do to it. If the screen's plastic, don't even think about touching the lower surface at all. Just use a bulb-blower to puff air at it to dislodge dust. If you rub it you'll almost certainly scratch it and make things far worse than they could possibly be right now. As for the top of the screen, the same basic advice applies, although there's less risk of wrecking it. I think alcohol might harm plastic . . . IF you must touch it, suggest a microfibre or similar soft cloth and breathing on it.
I know it's hard, but unless the screen is so marked that you can't focus on it, the very best plan is to leave it alone. _________________ Stephen
Equipment: Pentax DSLR for casual shooting, Lumix G1 and Fuji XE-1 for playing with old lenses, and Leica M8 because I still like the optical rangefinder system. |
|
| トップへ戻る |
|
 |
drosales
登録日: 2011年12月8日 投稿: 7
|
 投稿日時: 火 12月 27, 2011 6:42 pm 件名: Problems with FT EE Exposure... |
|
 投稿日時: 火 12月 27, 2011 6:42 pm 件名: Problems with FT EE Exposure... |
|
|
drosales wrote:
Of the few times I have used my Petri FT EE camera to take pictures, the photos have often come out with a slight bluish tint. Violets end up being blue, bright lime greens a darker shade, and lavender a bit pinkish. Instead of using the apeture as recommended on the meter, I usually adjust the F-Ring until the meter's needle lands on, or as close to the blue dot exposure mark wught next to the F.28 mark. Is this a bad idea? Should I follow he meter's advice, instead? I've also notice that sometimes the needle lands on the blue dot with the recommended apeture, and sometimes not. Any recommendations out there? Also, some of the photos have a white or dark bar on the sides. Could this be due to a problem with the lens? This is an old camera that I recently purchased on eBay, and there's no telling how the meter and lens have been holding up after all these years. A reply would be gratly appreciated!!! Thanks, D.R. |
|
| トップへ戻る |
|
 |
luisalegria
 登録日: 2008年3月7日 投稿: 6602 所在地: San Francisco, USA
Expire: 2018-01-18
|
 投稿日時: 火 12月 27, 2011 11:09 pm 件名: |
|
 投稿日時: 火 12月 27, 2011 11:09 pm 件名: |
|
|
luisalegria wrote:
The white or dark bar, if its obscuring part of the frame, is most likely due to a shutter fault - does this camera have a horizontal fabric shutter ?
You may want to test the camera at different speeds to check if this problem occurs at certain speeds.
Odd tints may be due to the lens, but I find that unlikely. More likely is the selection of film you are using and your film processor.
Exposure is exposure, no matter how you measure it. Different film will react differently to overexposure/underexposure. If you don't trust the camera meter, try a hand-held meter.
As for your cameras meter - changes in both speed and aperture should affect the exposure readings. Sometimes with any of these systems the indicator will not come in precisely, as you cant select intermediate speeds, or intermediate apertures. Normal print film has plenty of latitude though so such precision isn't really needed.
You can avoid using a meter entirely - "sunny 16" works very well. Go shooting in bright sunlight - to shoot for the highlights, if you are using ISO 100 film, set speed to 125 (thats close enough) and aperture to f/16. Or trade stops for speed - its the same exposure at 250 and f/11, or 500 and f/8 _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| トップへ戻る |
|
 |
drosales
登録日: 2011年12月8日 投稿: 7
|
 投稿日時: 木 12月 29, 2011 6:15 pm 件名: |
|
 投稿日時: 木 12月 29, 2011 6:15 pm 件名: |
|
|
drosales wrote:
| luisalegria 氏の書き込み: |
The white or dark bar, if its obscuring part of the frame, is most likely due to a shutter fault - does this camera have a horizontal fabric shutter ?
You may want to test the camera at different speeds to check if this problem occurs at certain speeds.
Odd tints may be due to the lens, but I find that unlikely. More likely is the selection of film you are using and your film processor.
Exposure is exposure, no matter how you measure it. Different film will react differently to overexposure/underexposure. If you don't trust the camera meter, try a hand-held meter.
As for your cameras meter - changes in both speed and aperture should affect the exposure readings. Sometimes with any of these systems the indicator will not come in precisely, as you cant select intermediate speeds, or intermediate apertures. Normal print film has plenty of latitude though so such precision isn't really needed.
You can avoid using a meter entirely - "sunny 16" works very well. Go shooting in bright sunlight - to shoot for the highlights, if you are using ISO 100 film, set speed to 125 (thats close enough) and aperture to f/16. Or trade stops for speed - its the same exposure at 250 and f/11, or 500 and f/8 |
Yes, it has a vertical fabric shutter. Could that be the reason why I'm getting faded white or dark shades on the sides of my photos? Is it because the shutter is not solid that light may be leaking through the top and bottom edges? Or, maybe the shutter is not closing fast enough due to friction? In that case, would a careful lube job along the shutter's tracks help alleviate the problem? On the last batch of photos that I took, the only print that came out perfect without any bluish tints happened to be the only shot that I took using the camera's auto-exposure mode. BTW, I used Kodak Ektar 100 Color Negative Film.
Thanks,
D.R. |
|
| トップへ戻る |
|
 |
luisalegria
 登録日: 2008年3月7日 投稿: 6602 所在地: San Francisco, USA
Expire: 2018-01-18
|
 投稿日時: 木 12月 29, 2011 6:27 pm 件名: |
|
 投稿日時: 木 12月 29, 2011 6:27 pm 件名: |
|
|
luisalegria wrote:
Maybe you should scan these shots with bluish tints and post them here.
Are they overall bluish, or are there bluish areas ?
I can't imagine why they would come out like this as a result of either a shutter or a lens problem.
You could certainly have an exposure problem, but thats really easy to check - see what I wrote about checking your exposure.
This thing has a vertical fabric shutter ? I have never seen that on a 35mm slr. Fabric shutters normally work horizontally. Metal shutters are often vertical.
Are the white/dark areas on the horizontal sides of the picture or the vertical ?
Yes indeed, shutter timing can be off due to lack of lubrication or old lubricant. It could also be a lot of other things. Weak springs, bad bearings, stretched curtain tapes, bent parts, frayed areas, etc. _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| トップへ戻る |
|
 |
drosales
登録日: 2011年12月8日 投稿: 7
|
 投稿日時: 木 12月 29, 2011 6:37 pm 件名: |
|
 投稿日時: 木 12月 29, 2011 6:37 pm 件名: |
|
|
drosales wrote:
| luisalegria 氏の書き込み: |
Maybe you should scan these shots with bluish tints and post them here.
Are they overall bluish, or are there bluish areas ?
I can't imagine why they would come out like this as a result of either a shutter or a lens problem.
You could certainly have an exposure problem, but thats really easy to check - see what I wrote about checking your exposure.
This thing has a vertical fabric shutter ? I have never seen that on a 35mm slr. Fabric shutters normally work horizontally. Metal shutters are often vertical.
Are the white/dark areas on the horizontal sides of the picture or the vertical ?
Yes indeed, shutter timing can be off due to lack of lubrication or old lubricant. It could also be a lot of other things. Weak springs, bad bearings, stretched curtain tapes, bent parts, frayed areas, etc. |
Ooops, I meant horizontal(not vertical) fabric shutter. As for the problems with the slight, slight bluish tints, it's probably because I have the apeture set too low(high number). It looked a whole lot better with auto exposure, so at least I know that feature is working.
D.R. |
|
| トップへ戻る |
|
 |
bob955i
 登録日: 2007年4月15日 投稿: 2495
|
 投稿日時: 木 12月 29, 2011 6:43 pm 件名: |
|
 投稿日時: 木 12月 29, 2011 6:43 pm 件名: |
|
|
bob955i wrote:
| drosales 氏の書き込み: |
| ...In that case, would a careful lube job along the shutter's tracks help alleviate the problem?... |
No, don't do that - as the shutter is rubberised fabric, you'll damage the shutter curtain material and make things worse for yourself, especially if the fault's not down to perished material. You need to look at the items that Luis suggested plus the shutter curtains themselves as the rubber coating can go stiff and perish over the years - cock the shutter and look for cracks on both curtains. This is a fairly common fault with Exakta Varex/VX and the 50s Contax/Pentacon F series cameras as well. |
|
| トップへ戻る |
|
 |
Excalibur
 登録日: 2009年7月19日 投稿: 5018 所在地: UK
Expire: 2014-04-21
|
 投稿日時: 木 12月 29, 2011 6:51 pm 件名: |
|
 投稿日時: 木 12月 29, 2011 6:51 pm 件名: |
|
|
Excalibur wrote:
***the photos have often come out with a slight bluish tint. Violets end up being blue, bright lime greens a darker shade, and lavender a bit pinkish. ***
Well I'd say either you used bad film or the operator who scanned the negs and did the prints didn't do a very good job, but if it was all done cheaply...you get what you pay for  _________________ Canon A1, AV1, T70 & T90, EOS 300 and EOS300v, Chinon CE and CP-7M. Contax 139, Fuji STX-2, Konica Autoreflex TC, FS-1, FT-1, Minolta X-700, X-300, XD-11, SRT101b, Nikon EM, FM, F4, F90X, Olympus OM2, Pentax S3, Spotmatic, Pentax ME super, Praktica TL 5B, & BC1, , Ricoh KR10super, Yashica T5D, Bronica Etrs, Mamiya RB67 pro AND drum roll:- a Sony Nex 3
.........past gear Tele Rolleiflex and Rollei SL66.
Many lenses from good to excellent. |
|
| トップへ戻る |
|
 |
bob955i
 登録日: 2007年4月15日 投稿: 2495
|
 投稿日時: 木 12月 29, 2011 6:59 pm 件名: |
|
 投稿日時: 木 12月 29, 2011 6:59 pm 件名: |
|
|
bob955i wrote:
| Excalibur 氏の書き込み: |
***the photos have often come out with a slight bluish tint. Violets end up being blue, bright lime greens a darker shade, and lavender a bit pinkish. ***
Well I'd say either you used bad film or the operator who scanned the negs and did the prints didn't do a very good job, but if it was all done cheaply...you get what you pay for  |
Based on what I got back from a rather well-known and apparently pro lab some time ago, I'd go for operator error.
The response I got from the manager wasn't encouraging either when he said that their operators always strive to 'improve' the customer's shots and apparently I should have specifically instructed them NOT to attempt this. |
|
| トップへ戻る |
|
 |
|
|