| 前のトピックへ :: 次のトピックへ |
| 作成者 |
メッセージ |
padiej
 登録日: 2008年4月5日 投稿: 244 所在地: AUSTRIA - Burgenland
|
 投稿日時: 水 5月 28, 2008 2:20 pm 件名: My Scanner can´t make good negativ/dia-scans - what can I do |
|
 投稿日時: 水 5月 28, 2008 2:20 pm 件名: My Scanner can´t make good negativ/dia-scans - what can I do |
|
|
padiej wrote:
I have a HP Scanjet 3800, 2400dpi, 48bit•
HP wrote:
Scan up to two 35 mm slides or two negative frames at once using the built-in TMA (Transparent Materials Adapter), or scan
multiple photos – even different sizes – at the same time.
• Save time with multi-image scanning – each image is automatically saved as a separate file.
• Use Preview for multi-image scanning to make sure you’re capturing everything you want.
The result of 100ASA negativ scan:
http://www.flickr.com/photos/padiej/sets/72157605280275336/
not akzeptable, I get better results by scanning the 300dpi positive Picture-
Today, I have scanned Dias - horrible Results, a good dia - no sharpness to get
I think, this scanner is a joke, only dust is good to see, the software is a big mistake
You are the experts in this medium- my question:
WHICH SCANNER IS GOOD FOR FILM/DIA ?
regards Peter _________________ Cam: Canon EOS 5D, 50D, 500D, Pentax Ist DL
Lenses on
www.flickr.com/photos/padiej/ |
|
| トップへ戻る |
|
 |
poilu
 登録日: 2007年8月26日 投稿: 10476 所在地: Greece
Expire: 2019-08-29
|
 投稿日時: 水 5月 28, 2008 2:40 pm 件名: |
|
 投稿日時: 水 5月 28, 2008 2:40 pm 件名: |
|
|
poilu wrote:
hi Peter
the result look quite good to me _________________ T* |
|
| トップへ戻る |
|
 |
maddog10
 登録日: 2008年4月8日 投稿: 1072 所在地: Maryland, USA
Expire: 2015-02-12
|
 投稿日時: 水 5月 28, 2008 3:57 pm 件名: |
|
 投稿日時: 水 5月 28, 2008 3:57 pm 件名: |
|
|
maddog10 wrote:
How do the scans compare to the original prints? _________________ Michael Hill |
|
| トップへ戻る |
|
 |
Rob Leslie
 登録日: 2007年3月20日 投稿: 1103 所在地: UK Swindon
|
 投稿日時: 水 5月 28, 2008 4:50 pm 件名: |
|
 投稿日時: 水 5月 28, 2008 4:50 pm 件名: |
|
|
Rob Leslie wrote:
Dust can be removed but the problem you have is lots of noise. Looking at the full size image it seems as if the scanner is trying to sharpen the image. They are very bad.
I packed in scanning years ago but my suggestion would be to turn off all default values and reduce resolution to about 1200dpi. When and if you begin to get good scans at this low resolution then up it and start again.
Whatever you do don’t let the scanner software do any sharpening.
I only looked at one image asa100mesuper50-2mohnblumenfeld2 _________________ Pentax K10D & K100D. Many Tamron Adaptall SP lenses, Fujinon f4.5 400mm. A loved Lens Baby 2, Lubitel triplet +++ and many film cameras. Mainly a Digital user inc G5, GR2
http://robstreet.blogspot.com/
http://robleslie.blogspot.com/
http://roblesliephotography.blogspot.com/
http://www.flickr.com/photos/64956578@N00/ |
|
| トップへ戻る |
|
 |
padiej
 登録日: 2008年4月5日 投稿: 244 所在地: AUSTRIA - Burgenland
|
 投稿日時: 水 5月 28, 2008 5:10 pm 件名: |
|
 投稿日時: 水 5月 28, 2008 5:10 pm 件名: |
|
|
padiej wrote:
At first, the scanner is named
HP SCANJET G3010 ... not 3800 sorry, my mistake
yet, I am search for new drivers and software and try the scans again
then I will scan the prints
I was used a cheap 100ASA Film - a mistake, dark areas beginn to noise
now i test the DIA-Scans, today I got 36 new Dias from the Pentax K1000d with the M50/2,0 and M40/2,8 on it
a am snoopy -
see you later with the reults
Peter _________________ Cam: Canon EOS 5D, 50D, 500D, Pentax Ist DL
Lenses on
www.flickr.com/photos/padiej/ |
|
| トップへ戻る |
|
 |
padiej
 登録日: 2008年4月5日 投稿: 244 所在地: AUSTRIA - Burgenland
|
 投稿日時: 水 5月 28, 2008 5:20 pm 件名: |
|
 投稿日時: 水 5月 28, 2008 5:20 pm 件名: |
|
|
padiej wrote:
Thanks Rob - sharpening is needless!
I clean the film and only, i scan with 2400, without softwarehelp -
so I get better results -
The softwarepackage isn´t the best -
the resolution 2400dpi is to much, I see it about 1500-1700 by ISO 100
Negativ is sharper then DIA by my first test
Thank you all !!! _________________ Cam: Canon EOS 5D, 50D, 500D, Pentax Ist DL
Lenses on
www.flickr.com/photos/padiej/ |
|
| トップへ戻る |
|
 |
padiej
 登録日: 2008年4月5日 投稿: 244 所在地: AUSTRIA - Burgenland
|
 投稿日時: 木 5月 29, 2008 4:24 am 件名: |
|
 投稿日時: 木 5月 29, 2008 4:24 am 件名: |
|
|
padiej wrote:
Hallo!
It works:
Diascan 2400dpi:
http://www.flickr.com/photos/padiej/2531701984/sizes/o/
only a scan without softwaremanipulation - only the source
greetings Peter _________________ Cam: Canon EOS 5D, 50D, 500D, Pentax Ist DL
Lenses on
www.flickr.com/photos/padiej/ |
|
| トップへ戻る |
|
 |
padiej
 登録日: 2008年4月5日 投稿: 244 所在地: AUSTRIA - Burgenland
|
 投稿日時: 木 5月 29, 2008 4:26 am 件名: |
|
 投稿日時: 木 5月 29, 2008 4:26 am 件名: |
|
|
padiej wrote:
Hallo!
It works:
Diascan 2400dpi:
http://www.flickr.com/photos/padiej/2531701984/sizes/o/
only a scan without softwaremanipulation - only the source
greetings Peter _________________ Cam: Canon EOS 5D, 50D, 500D, Pentax Ist DL
Lenses on
www.flickr.com/photos/padiej/ |
|
| トップへ戻る |
|
 |
padiej
 登録日: 2008年4月5日 投稿: 244 所在地: AUSTRIA - Burgenland
|
 投稿日時: 日 6月 01, 2008 6:43 pm 件名: |
|
 投稿日時: 日 6月 01, 2008 6:43 pm 件名: |
|
|
padiej wrote:
I will try another scanner!
Reflecta CrystalScan 7200
it has a hardware cleaner
costs about 260€
is slow, but good
the software is imprtant, I read here:
www.filmscanner.info/en/ReflectaCrystalScan7200.html
regards Peter _________________ Cam: Canon EOS 5D, 50D, 500D, Pentax Ist DL
Lenses on
www.flickr.com/photos/padiej/ |
|
| トップへ戻る |
|
 |
peterqd
 登録日: 2007年2月28日 投稿: 7449 所在地: near High Wycombe, UK
Expire: 2014-01-04
|
 投稿日時: 日 6月 01, 2008 9:16 pm 件名: |
|
 投稿日時: 日 6月 01, 2008 9:16 pm 件名: |
|
|
peterqd wrote:
Peter, I was going to suggest you look at the Epson V500 in that price range, but the review of it on the site you linked to is very interesting
http://www.filmscanner.info/en/EpsonPerfectionV500Photo.html
I'm glad I decided not to buy it myself.
Another option for you to look at is the Epson 4490.
http://www.photo-i.co.uk/Reviews/interactive/Epson%204990/Page%201.htm. I think Bill uses this machine and he'll be able to tell you more about it than me. _________________ Peter - Moderator |
|
| トップへ戻る |
|
 |
padiej
 登録日: 2008年4月5日 投稿: 244 所在地: AUSTRIA - Burgenland
|
 投稿日時: 月 6月 02, 2008 10:29 am 件名: |
|
 投稿日時: 月 6月 02, 2008 10:29 am 件名: |
|
|
padiej wrote:
hallo!
Flat scanners have a low optic resulution by tests, max. 1600dpi, I resurched on weekend, but the producers push them up to 3600 dpi and more -
this is consumer catching
my cheap scanner from hp have tested 1300 dpi, to little for a negativ scan,
here we need 2400 ore more
The Reflecta makes 3300 dpi and has a good softwarepackage, I have to pay 241€ without tax.
I will test it after shipment.
Nikon is the best, but the cheapest costs 750€ with the software to bring the best results, it is to expensive for me.
Photograph the Negatives is a trouble with the dynamik range by cam, the negative is orange-brown and the cam can´t read all information out, so the softwaremanipulation is possible (invert, colouradjustment) but a lot of Negativinformation are undocumented
Dias are simple to digitalise, Dia-Beamer + screen (white plane)
and lets fotographing the Diashow , that´s all
That´s my standard of knowledge, today.
regards Peter _________________ Cam: Canon EOS 5D, 50D, 500D, Pentax Ist DL
Lenses on
www.flickr.com/photos/padiej/ |
|
| トップへ戻る |
|
 |
|
|
|
このフォーラムでは新しいトピックを投稿できません このフォーラムではトピックに返信できません このフォーラムでは自分の投稿を編集できません このフォーラムでは自分の投稿を削除できません このフォーラムでは投票に参加できません
|