| 前のトピックへ :: 次のトピックへ |
| 作成者 |
メッセージ |
kuuan
 登録日: 2008年1月14日 投稿: 4569 所在地: right now: Austria
Expire: 2014-12-26
|
 投稿日時: 月 2月 23, 2015 11:51 am 件名: Is this lens separation? |
|
 投稿日時: 月 2月 23, 2015 11:51 am 件名: Is this lens separation? |
|
|
kuuan wrote:
what do you guys say, is this lens separation?
if so I 'may' go ahead and try recementing it, which had been described so well here in this forum, I wished someone made it a sticky:
http://forum.mflenses.com/re-cementing-doublet-elements-with-canadian-balsam-t34467.html
( better I gave it a try with a cheaper lens first though..) _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| トップへ戻る |
|
 |
kuuan
 登録日: 2008年1月14日 投稿: 4569 所在地: right now: Austria
Expire: 2014-12-26
|
 投稿日時: 月 2月 23, 2015 12:44 pm 件名: |
|
 投稿日時: 月 2月 23, 2015 12:44 pm 件名: |
|
|
kuuan wrote:
for those who are curious about how photos taken with this lens look like see 2 samples ( I haven't used this lens much, don't have many samples to chose from, and I must say it only looks that horrible if when lighting a flashlight through the lens )
Can't fault it's performance much, have been thinking that wide open sharpness possibly 'could' be better and that it easily shows PF. Can these be accredited to the fault seen, resp. to lens separation?
and: the lens is a Voigtlaender Color Heliar f2.5/75mm, the fault is in the second to last lens group which is a cemented pair. I can't make out if the fault is on it's surface or in the cementing, but suspect that it looks typical for lens separation _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections
最終編集: kuuan、月 2月 23, 2015 1:05 pm、計 1 回 |
|
| トップへ戻る |
|
 |
calvin83
 登録日: 2009年4月12日 投稿: 7740 所在地: Hong Kong
|
 投稿日時: 月 2月 23, 2015 1:02 pm 件名: |
|
 投稿日時: 月 2月 23, 2015 1:02 pm 件名: |
|
|
calvin83 wrote:
From the shape of the yellowed area, I would say it is separation. You will know when you opened the lens. _________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/ |
|
| トップへ戻る |
|
 |
kuuan
 登録日: 2008年1月14日 投稿: 4569 所在地: right now: Austria
Expire: 2014-12-26
|
 投稿日時: 月 2月 23, 2015 1:07 pm 件名: |
|
 投稿日時: 月 2月 23, 2015 1:07 pm 件名: |
|
|
kuuan wrote:
| calvin83 氏の書き込み: |
| From the shape of the yellowed area, I would say it is separation. You will know when you opened the lens. |
thank you Calvin.
I had opened the lens but looking at the faulty group I can't make out if the fault is on the surface or 'in the middle' of the lens, that is in the cementing _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| トップへ戻る |
|
 |
calvin83
 登録日: 2009年4月12日 投稿: 7740 所在地: Hong Kong
|
 投稿日時: 月 2月 23, 2015 1:18 pm 件名: |
|
 投稿日時: 月 2月 23, 2015 1:18 pm 件名: |
|
|
calvin83 wrote:
| kuuan 氏の書き込み: |
| calvin83 氏の書き込み: |
| From the shape of the yellowed area, I would say it is separation. You will know when you opened the lens. |
thank you Calvin.
I had opened the lens but looking at the faulty group I can't make out if the fault is on the surface or 'in the middle' of the lens, that is in the cementing |
Any more photos taken from different angles? _________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/ |
|
| トップへ戻る |
|
 |
kuuan
 登録日: 2008年1月14日 投稿: 4569 所在地: right now: Austria
Expire: 2014-12-26
|
 投稿日時: 月 2月 23, 2015 1:32 pm 件名: |
|
 投稿日時: 月 2月 23, 2015 1:32 pm 件名: |
|
|
kuuan wrote:
| calvin83 氏の書き込み: |
Any more photos taken from different angles? |
looking through the lens without flashlight it looks clean. The fault only can seen when using a flashlight and for taking the photo I had to find the right angle. Even when looking at the lens group only, after removing it from the lens, one hardly can make out the fault. I may try to take other photos tomorrow, then of the group only, but I suspect that I can't take any better ones than shown.
oh, I do have more photos that I had taken today:
 _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| トップへ戻る |
|
 |
calvin83
 登録日: 2009年4月12日 投稿: 7740 所在地: Hong Kong
|
 投稿日時: 月 2月 23, 2015 1:42 pm 件名: |
|
 投稿日時: 月 2月 23, 2015 1:42 pm 件名: |
|
|
calvin83 wrote:
If the damage is in the surface, you should see it when you looking at the lens group alone at an angle under a light source.
Here is the same lens with fog(separation) http://lens-cla.blogspot.hk/2014/02/voigtlander-color-heliar-75mm-f25-mc.html _________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/ |
|
| トップへ戻る |
|
 |
kuuan
 登録日: 2008年1月14日 投稿: 4569 所在地: right now: Austria
Expire: 2014-12-26
|
 投稿日時: 月 2月 23, 2015 1:56 pm 件名: |
|
 投稿日時: 月 2月 23, 2015 1:56 pm 件名: |
|
|
kuuan wrote:
ok, I shall see again tomorrow ( won't open the lens now, being tired, at 1 AM )
thank you for the link Calvin! It is the same cemented group shown in the link which is faulty in mine. I'd say that confirms the suspicion that it is lens separation. Are there any tips that you can forward, that can be taken from that blog? _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| トップへ戻る |
|
 |
ZoneV
 登録日: 2009年11月9日 投稿: 1633 所在地: Germany
Expire: 2011-12-02
|
 投稿日時: 月 2月 23, 2015 2:01 pm 件名: |
|
 投稿日時: 月 2月 23, 2015 2:01 pm 件名: |
|
|
ZoneV wrote:
Thank you for that link! He does professional what I do for my own lenses, separation repair and lens polishing. _________________ Camera modification, repair and DIY - some links to look through: http://www.4photos.de/camera-diy/index-en.html
I AM A LENS NERD!
Epis, Elmaron, Emerald, Ernostar, Helioplan and Heidosmat.
Epiotar, Kameraobjektiv, Anastigmat, Epis, Meganast, Magnagon, Quinar, Culmigon, Novotrinast, Novflexar, Colorplan, Sekor, Kinon, Talon, Telemegor, Xenon, Xenar, Ultra, Ultra Star. Tessar, Janar, Visionar, Kiptar, Kipronar and Rotelar.
|
|
| トップへ戻る |
|
 |
calvin83
 登録日: 2009年4月12日 投稿: 7740 所在地: Hong Kong
|
|
| トップへ戻る |
|
 |
kuuan
 登録日: 2008年1月14日 投稿: 4569 所在地: right now: Austria
Expire: 2014-12-26
|
 投稿日時: 月 2月 23, 2015 2:37 pm 件名: |
|
 投稿日時: 月 2月 23, 2015 2:37 pm 件名: |
|
|
kuuan wrote:
thank you so much Calvin for the links!
Actually I had seen this very same sites, they had given me confidence that I may be able to to it myself
cheers, andreas _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| トップへ戻る |
|
 |
kuuan
 登録日: 2008年1月14日 投稿: 4569 所在地: right now: Austria
Expire: 2014-12-26
|
 投稿日時: 月 2月 23, 2015 2:42 pm 件名: |
|
 投稿日時: 月 2月 23, 2015 2:42 pm 件名: |
|
|
kuuan wrote:
| ZoneV 氏の書き込み: |
Thank you for that link! He does professional what I do for my own lenses, separation repair and lens polishing. |
Markus thank you very much for participating in this thread!
I had found your instructions so very helpful, they may make me try out myself!
Most interesting I found that you use 'Uhu Glas' for re-cementing. I guess that by now you must have done this, and used Uhu Glas for some other lenses too, right?
ha, you even do lens polishing! I could use a few tips about that too! There is a number of faulty Canon LTM lenses that I have, typical milky, etched glass and all my attempts of polishing them have not yielded much result. Same with my M-Rokkor 2.8/28. Do I find tips on polishing on your blog? Or can you give me hints here please, point me to where find info, or can I ask you specific questions per PM?
thank you so much, andreas _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| トップへ戻る |
|
 |
calvin83
 登録日: 2009年4月12日 投稿: 7740 所在地: Hong Kong
|
 投稿日時: 月 2月 23, 2015 3:17 pm 件名: |
|
 投稿日時: 月 2月 23, 2015 3:17 pm 件名: |
|
|
calvin83 wrote:
| kuuan 氏の書き込み: |
thank you so much Calvin for the links!
Actually I had seen this very same sites, they had given me confidence that I may be able to to it myself
cheers, andreas |
If you can access to a lens analyzer/meter(usually found in glasses shops), you can measure the centering of the lens group after you cemented it. Here is another thread in a forum on my city on element repair showing the digital lens analyzer:
http://www.dchome.net/forum.php?mod=redirect&goto=findpost&ptid=1164990&pid=13685884&fromuid=281250 _________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/ |
|
| トップへ戻る |
|
 |
ZoneV
 登録日: 2009年11月9日 投稿: 1633 所在地: Germany
Expire: 2011-12-02
|
 投稿日時: 月 2月 23, 2015 8:26 pm 件名: |
|
 投稿日時: 月 2月 23, 2015 8:26 pm 件名: |
|
|
ZoneV wrote:
| kuuan 氏の書き込み: |
...
Markus thank you very much for participating in this thread!
I had found your instructions so very helpful, they may make me try out myself!
Most interesting I found that you use 'Uhu Glas' for re-cementing. I guess that by now you must have done this, and used Uhu Glas for some other lenses too, right?
ha, you even do lens polishing! I could use a few tips about that too! There is a number of faulty Canon LTM lenses that I have, typical milky, etched glass and all my attempts of polishing them have not yielded much result. Same with my M-Rokkor 2.8/28. Do I find tips on polishing on your blog? Or can you give me hints here please, point me to where find info, or can I ask you specific questions per PM?
.. |
Andreas, here my lens polishing websites:
Lens antireflection coating polishing, lens scratch polishing.
I tried the Zeiss method with cigarettes ash ones, but the coating was too hard to be polished with that. Or the cigarettes are too soft
I think I have repaired a second lens with the Uhu Glass, but not sure which one. The repaired Wirgin 85mm/1.9 works very well, use it often at the moment. I have a Rodagon with delamination, waiting for the repair, and I think at last another lens that could be repaired. _________________ Camera modification, repair and DIY - some links to look through: http://www.4photos.de/camera-diy/index-en.html
I AM A LENS NERD!
Epis, Elmaron, Emerald, Ernostar, Helioplan and Heidosmat.
Epiotar, Kameraobjektiv, Anastigmat, Epis, Meganast, Magnagon, Quinar, Culmigon, Novotrinast, Novflexar, Colorplan, Sekor, Kinon, Talon, Telemegor, Xenon, Xenar, Ultra, Ultra Star. Tessar, Janar, Visionar, Kiptar, Kipronar and Rotelar.
|
|
| トップへ戻る |
|
 |
kuuan
 登録日: 2008年1月14日 投稿: 4569 所在地: right now: Austria
Expire: 2014-12-26
|
 投稿日時: 水 2月 25, 2015 8:50 am 件名: |
|
 投稿日時: 水 2月 25, 2015 8:50 am 件名: |
|
|
kuuan wrote:
| ZoneV 氏の書き込み: |
Andreas, here my lens polishing websites:
Lens antireflection coating polishing, lens scratch polishing.
I tried the Zeiss method with cigarettes ash ones, but the coating was too hard to be polished with that. Or the cigarettes are too soft
I think I have repaired a second lens with the Uhu Glass, but not sure which one. The repaired Wirgin 85mm/1.9 works very well, use it often at the moment. I have a Rodagon with delamination, waiting for the repair, and I think at last another lens that could be repaired. |
thank's a lot for that Markus!
certainly I shall follow your tips and not give up trying to improve the 'milky' lenses I have.
About using Uhu Glas, I guess once glued there is no way to get the elements apart again, what do you think? Fearful that this might be necessary I shall try to get hold of some Canada Balsam instead. Anyways, no hurry for trying that repair, shall only do it once I have a good enough set up.
thank you again everybody,
cheers, andreas _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| トップへ戻る |
|
 |
kuuan
 登録日: 2008年1月14日 投稿: 4569 所在地: right now: Austria
Expire: 2014-12-26
|
 投稿日時: 日 12月 20, 2015 8:27 am 件名: |
|
 投稿日時: 日 12月 20, 2015 8:27 am 件名: |
|
|
kuuan wrote:
That site seems to have disappeared ( or is it just blocked here, in Vietnam? )
Calvin, do you know if there any information on that site on what kind of cementing was used, resp. how easy / difficult it was to separate the elements? I have tried, but did not have success. _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| トップへ戻る |
|
 |
calvin83
 登録日: 2009年4月12日 投稿: 7740 所在地: Hong Kong
|
 投稿日時: 日 12月 20, 2015 9:02 am 件名: |
|
 投稿日時: 日 12月 20, 2015 9:02 am 件名: |
|
|
calvin83 wrote:
| kuuan 氏の書き込み: |
That site seems to have disappeared ( or is it just blocked here, in Vietnam? )
Calvin, do you know if there any information on that site on what kind of cementing was used, resp. how easy / difficult it was to separate the elements? I have tried, but did not have success. |
The site is working at my side. The is no information on how he separate the lens element. I have included the information on how to remove the UV-glue on the other thread:
| Lloydy 氏の書き込み: |
MEK, mentioned in the data sheet, is easily available from most plumbing and building merchants as it is the solvent used to clean PVC pipework before gluing. Be very careful, it is very nasty stuff. Not only to the user, it will strip paint. |
_________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/ |
|
| トップへ戻る |
|
 |
kuuan
 登録日: 2008年1月14日 投稿: 4569 所在地: right now: Austria
Expire: 2014-12-26
|
 投稿日時: 日 12月 20, 2015 9:07 am 件名: |
|
 投稿日時: 日 12月 20, 2015 9:07 am 件名: |
|
|
kuuan wrote:
thank you very much for your fast reply Calvin, and great that you linked to the other thread, where you were so kind and linked to the info how to separate UV cementing  _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| トップへ戻る |
|
 |
|
|
|
このフォーラムでは新しいトピックを投稿できません このフォーラムではトピックに返信できません このフォーラムでは自分の投稿を編集できません このフォーラムでは自分の投稿を削除できません このフォーラムでは投票に参加できません
|