| 前のトピックへ :: 次のトピックへ |
| 作成者 |
メッセージ |
norland
 登録日: 2013年8月10日 投稿: 165
|
 投稿日時: 日 4月 20, 2014 12:13 am 件名: ??? what to use to matt-black inside a lens-hood |
|
 投稿日時: 日 4月 20, 2014 12:13 am 件名: ??? what to use to matt-black inside a lens-hood |
|
|
norland wrote:
Any recommendations for the best non-reflecting lining material or paint with which to do the inside of a lens hood?
It is a 3" long, 82mm hood branded "Desmond" ... solidly made, but while it has a semi-matt finish on the outside,
its inner surface is coated with semi-gloss.  |
|
| トップへ戻る |
|
 |
kuuan
 登録日: 2008年1月14日 投稿: 4569 所在地: right now: Austria
Expire: 2014-12-26
|
 投稿日時: 日 4月 20, 2014 6:45 am 件名: |
|
 投稿日時: 日 4月 20, 2014 6:45 am 件名: |
|
|
kuuan wrote:
I hope that someone else can give you a better suggestion, but since so far nobody answered: how about a fllat black acrylic paint as e.g. sold by Tamiya for it's plastic'scale models', I think it works well on metals too: http://www.tamiyausa.com/items/paints-finishes-60/tamiya-color-mini-flat-acrylic-60200/acrylic-mini-xf-1-flat-black-81701 _________________ my photos on flickr: https://www.flickr.com/photos/kuuan/collections |
|
| トップへ戻る |
|
 |
SXR_Mark
 登録日: 2010年6月12日 投稿: 506 所在地: England
|
 投稿日時: 日 4月 20, 2014 9:11 am 件名: |
|
 投稿日時: 日 4月 20, 2014 9:11 am 件名: |
|
|
SXR_Mark wrote:
I have used Humbrol modellers' paint. Flat Black 33 is a nice matt black. It does not stick very well to bare metal though. It is ok when sprayed onto the inside of hoods.
Maybe black cellulose undercoat for car body sprays would be good for metal hoods. I haven't tried it so don't how matt it is (or even if it still available). Don't use on plastic of course because the cellulose thinner will melt it.
I also tried Plasticoat Flat Black, but this was really quite glossy. Useless!
Mark _________________ Olympus OM-D E-M1 for everything |
|
| トップへ戻る |
|
 |
philslizzy
 登録日: 2012年8月7日 投稿: 4753 所在地: Cheshire, England
|
 投稿日時: 日 4月 20, 2014 9:45 am 件名: |
|
 投稿日時: 日 4月 20, 2014 9:45 am 件名: |
|
|
philslizzy wrote:
The problem with matt black paints is the 'filler'. They must be mixed absolutely thoroughly to make sure the filler is distributed evenly. It is this that that gives matt black it's appearance. If they are not stirred properly or the paint is old the filler clumps together and you get a streaky semi matt appearance.
I use blackboard paint from the pound shop, cheaper than Tamiya and Humbrol but does the same job. I had a tin from years ago and found it did the job.
Recently when making my home made microscope I noticed reflections so now I use 'funky foam' a product available in art and craft shops. Closed cell and matt black. Perhaps that may do the job. Funky foam is recommended by Lloydy as a material to replace light seals _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| トップへ戻る |
|
 |
dan_
 登録日: 2012年12月5日 投稿: 1070 所在地: Romania
Expire: 2016-12-19
|
 投稿日時: 日 4月 20, 2014 11:02 am 件名: |
|
 投稿日時: 日 4月 20, 2014 11:02 am 件名: |
|
|
dan_ wrote:
Black matte paint was a great problem for my DIY projects. None of them proved to be strong enough.
After a lot of tests with a lot of paints I ended up with the common matte black car paint spray. After it dries I bake it in the electric oven (the kitchen type) for 1.5 hours at 120-130 Celsius degrees (a lot of tests to empirically find temperature & timing). It becomes very strong this way, strong enough for any photographic equipment and it has a nice matte texture.
Brass can be very well blacken with the gun blackening solution.
最終編集: dan_、日 4月 20, 2014 12:40 pm、計 1 回 |
|
| トップへ戻る |
|
 |
Excalibur
 登録日: 2009年7月19日 投稿: 5018 所在地: UK
Expire: 2014-04-21
|
 投稿日時: 日 4月 20, 2014 11:38 am 件名: |
|
 投稿日時: 日 4月 20, 2014 11:38 am 件名: |
|
|
Excalibur wrote:
| philslizzy 氏の書き込み: |
The problem with matt black paints is the 'filler'. They must be mixed absolutely thoroughly to make sure the filler is distributed evenly. It is this that that gives matt black it's appearance. If they are not stirred properly or the paint is old the filler clumps together and you get a streaky semi matt appearance.
I use blackboard paint from the pound shop, cheaper than Tamiya and Humbrol but does the same job. I had a tin from years ago and found it did the job.
Recently when making my home made microscope I noticed reflections so now I use 'funky foam' a product available in art and craft shops. Closed cell and matt black. Perhaps that may do the job. Funky foam is recommended by Lloydy as a material to replace light seals |
In Tesco it's 99p for A4
http://www.tesco.com/direct/funky-foam-sheet-a3-black/226-0741.prd?pageLevel=&skuId=226-0741&sc_cmp=pcp_GSF_Art%20%26%20Craft_226-0741kpid=226-0741&sc_cmp=ppc_g__&gclid=CIqMzsL87r0CFabLtAodcQwA7g
But matt black can be a problem as I wanted to paint the inside of my darkroom and just couldn't find any cheap emulsion paint. _________________ Canon A1, AV1, T70 & T90, EOS 300 and EOS300v, Chinon CE and CP-7M. Contax 139, Fuji STX-2, Konica Autoreflex TC, FS-1, FT-1, Minolta X-700, X-300, XD-11, SRT101b, Nikon EM, FM, F4, F90X, Olympus OM2, Pentax S3, Spotmatic, Pentax ME super, Praktica TL 5B, & BC1, , Ricoh KR10super, Yashica T5D, Bronica Etrs, Mamiya RB67 pro AND drum roll:- a Sony Nex 3
.........past gear Tele Rolleiflex and Rollei SL66.
Many lenses from good to excellent. |
|
| トップへ戻る |
|
 |
Lloydy
 登録日: 2009年9月2日 投稿: 7880 所在地: Ironbridge. UK.
Expire: 2022-01-01
|
 投稿日時: 日 4月 20, 2014 12:52 pm 件名: |
|
 投稿日時: 日 4月 20, 2014 12:52 pm 件名: |
|
|
Lloydy wrote:
The funky felt might be better, thinner and more flexible. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| トップへ戻る |
|
 |
philslizzy
 登録日: 2012年8月7日 投稿: 4753 所在地: Cheshire, England
|
 投稿日時: 日 4月 20, 2014 1:48 pm 件名: |
|
 投稿日時: 日 4月 20, 2014 1:48 pm 件名: |
|
|
philslizzy wrote:
| Excalibur 氏の書き込み: |
| philslizzy 氏の書き込み: |
The problem with matt black paints is the 'filler'. They must be mixed absolutely thoroughly to make sure the filler is distributed evenly. It is this that that gives matt black it's appearance. If they are not stirred properly or the paint is old the filler clumps together and you get a streaky semi matt appearance.
I use blackboard paint from the pound shop, cheaper than Tamiya and Humbrol but does the same job. I had a tin from years ago and found it did the job.
Recently when making my home made microscope I noticed reflections so now I use 'funky foam' a product available in art and craft shops. Closed cell and matt black. Perhaps that may do the job. Funky foam is recommended by Lloydy as a material to replace light seals |
In Tesco it's 99p for A4
http://www.tesco.com/direct/funky-foam-sheet-a3-black/226-0741.prd?pageLevel=&skuId=226-0741&sc_cmp=pcp_GSF_Art%20%26%20Craft_226-0741kpid=226-0741&sc_cmp=ppc_g__&gclid=CIqMzsL87r0CFabLtAodcQwA7g
But matt black can be a problem as I wanted to paint the inside of my darkroom and just couldn't find any cheap emulsion paint. |
Thanks for the Tesco link. Out local art shop is closing after 120 years.
Why paint your darkroom black? If it is light tight it doesn't matter what colour it is. White would be best, it will seem brighter when using a safelight. A safelight is safe because of the colour of the light not the intensity. I've always worked in a white darkroom. I couldn't imagine how gloomy it would be painted matt black. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| トップへ戻る |
|
 |
dan_
 登録日: 2012年12月5日 投稿: 1070 所在地: Romania
Expire: 2016-12-19
|
 投稿日時: 日 4月 20, 2014 1:49 pm 件名: |
|
 投稿日時: 日 4月 20, 2014 1:49 pm 件名: |
|
|
dan_ wrote:
If the black paint is not damaged and you only want to make it matte then a matte acrylic vanish (spray for painting type) could do the job better. |
|
| トップへ戻る |
|
 |
Excalibur
 登録日: 2009年7月19日 投稿: 5018 所在地: UK
Expire: 2014-04-21
|
 投稿日時: 日 4月 20, 2014 4:26 pm 件名: |
|
 投稿日時: 日 4月 20, 2014 4:26 pm 件名: |
|
|
Excalibur wrote:
| philslizzy 氏の書き込み: |
| Why paint your darkroom black? If it is light tight it doesn't matter what colour it is. White would be best, it will seem brighter when using a safelight. A safelight is safe because of the colour of the light not the intensity. I've always worked in a white darkroom. I couldn't imagine how gloomy it would be painted matt black. |
When colour printing from an enlarger it has to be done in complete darkness, even rumours about not wearing a luminous watch....well when switching on the enlarger why take a chance of light bouncing off a shiny wall and getting back onto the paper. _________________ Canon A1, AV1, T70 & T90, EOS 300 and EOS300v, Chinon CE and CP-7M. Contax 139, Fuji STX-2, Konica Autoreflex TC, FS-1, FT-1, Minolta X-700, X-300, XD-11, SRT101b, Nikon EM, FM, F4, F90X, Olympus OM2, Pentax S3, Spotmatic, Pentax ME super, Praktica TL 5B, & BC1, , Ricoh KR10super, Yashica T5D, Bronica Etrs, Mamiya RB67 pro AND drum roll:- a Sony Nex 3
.........past gear Tele Rolleiflex and Rollei SL66.
Many lenses from good to excellent. |
|
| トップへ戻る |
|
 |
philslizzy
 登録日: 2012年8月7日 投稿: 4753 所在地: Cheshire, England
|
 投稿日時: 日 4月 20, 2014 5:10 pm 件名: |
|
 投稿日時: 日 4月 20, 2014 5:10 pm 件名: |
|
|
philslizzy wrote:
Sorry I wasn't thinking of colour printing. What little colour I have done has been ok in a white darkroom. But I totally see the point now  _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| トップへ戻る |
|
 |
Excalibur
 登録日: 2009年7月19日 投稿: 5018 所在地: UK
Expire: 2014-04-21
|
 投稿日時: 日 4月 20, 2014 7:01 pm 件名: |
|
 投稿日時: 日 4月 20, 2014 7:01 pm 件名: |
|
|
Excalibur wrote:
| philslizzy 氏の書き込み: |
Sorry I wasn't thinking of colour printing. What little colour I have done has been ok in a white darkroom. But I totally see the point now  |
Probably doesn't make any difference in a large room, but I built a little darkroom in the garage (about 20 years ago) and the walls surrounding the enlarger were very close. _________________ Canon A1, AV1, T70 & T90, EOS 300 and EOS300v, Chinon CE and CP-7M. Contax 139, Fuji STX-2, Konica Autoreflex TC, FS-1, FT-1, Minolta X-700, X-300, XD-11, SRT101b, Nikon EM, FM, F4, F90X, Olympus OM2, Pentax S3, Spotmatic, Pentax ME super, Praktica TL 5B, & BC1, , Ricoh KR10super, Yashica T5D, Bronica Etrs, Mamiya RB67 pro AND drum roll:- a Sony Nex 3
.........past gear Tele Rolleiflex and Rollei SL66.
Many lenses from good to excellent. |
|
| トップへ戻る |
|
 |
|
|
|
このフォーラムでは新しいトピックを投稿できません このフォーラムではトピックに返信できません このフォーラムでは自分の投稿を編集できません このフォーラムでは自分の投稿を削除できません このフォーラムでは投票に参加できません
|