MFlenses - デジタル時代の新しさ
MFLenses 2026

マニュアルフォーカスレンズフォーラム

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。
スポットライト

フォーラムトップページのおすすめパートナー掲載。

Please help with Canon 5D .. :-(
前のトピックへ :: 次のトピックへ  


Reply

Hi guys
I was wondering if anyone with 5D could help me out....I got those 2 adapters ...

http://www.amazon.ca/Fotodiox-Mount-Adapter-Camera-Digital/dp/B001G4QXLE/ref=sr_1_1?ie=UTF8&qid=1397155739&sr=8-1&keywords=nikon+to+canon+adapter

http://www.amazon.ca/Neewer-Confirm-Nikon-Canon-Adapter/dp/B008DBDDKW/ref=sr_1_2?ie=UTF8&qid=1397155739&sr=8-2&keywords=nikon+to+canon+adapter

Both accept the Nikon glass fine...just won't lock to camera...they do fit the mount , you can turn them a little ...just won't lock to camera Sad . I do have M42 and C/Y adapters that I use without any issues .... I did try the adapter with and without lenses ...so it's the adapter itself that won't lock..not the lens issues
Anyone has any ideas ? Is there any adapters you could recommend ?

Thanks

Derek


Reply

hi i got this camera. it's a weird issue, usuallly it's a mirror issue.
try this shop on ebay > jackthehat. my latter adapter for C/Y worked fine...


Reply

Hi Hexi Smile

I do have C/Y and M42 adapters that work just fine...only issues I have is with Nikon adapters...2 different manufacturers...same problem Sad . Not sure if it's mirror...I did try without the lens...can't see any interference Sad .


Reply

Hi,

In the inner side of the adapter there is a red point which must align with the red point in the lens to adapt.
After that, there is a red point which isn't cover by the lens which has to match the red dot in the camera, after that the lens turned to the left until the small hole in the adapter matches the lock pin in the camera body at 3 o'clock position.
What's the problem you're facing now, the lens doesn't lock at the adapter or the group lens-adapter doesn't lock to the camera?

[]s,

Renato


Reply

Lenses mount fine..adapter fits the mount but wont turn to lock to camera..I did try with and without lenses


Reply

In 2 different adapters? I'm nearly 100% sure you're trying to connect the lens mounted in the adapter in a wrong position toward the camera.
Any "You name the mount" - EOS adapter has the same EOS mount camera adapter side design. Compare with the position you're connecting the adapter to the CAM with any other you own which works, your C/Y, for instance, it has to be the same, as both are made to fit an EOS camera mount.

[]s,

Renato


Reply

They can go in only one way because of the location of the chip.They look pretty much the same way as the M42 and C/Y mounts .


Reply

darrski 氏の書き込み:
They can go in only one way because of the location of the chip.They look pretty much the same way as the M42 and C/Y mounts .


Not only looks, but it has to be the same. At this point, my advice is to get both adapters and visit the camera repair shop for a close inspection and small adjust if necessary - if you can not or want not to wait for a replacement from the seller.

Cheers,

Renato


Reply

Hi Renato
That's why it drives me nuts....one is a replacement...which I tough was defective...and in meantime I had picked up the other adapter from different manufacturer ... the replacement ( I do feel bad about it Sad ) and the other adapter still won't lock ...I did some measurements with calipers...very close in along all adapters...the Canon lens caps fit them...but somehow the Nikon adapters will not lock onto the camera !!! They do fit the camera mount ..but as soon as you move them...they stop....I did try them without lens and can't see anything interfering Sad . That's why I had posted here , trying to see if anyone else has issues with Nikon to Canon adapters .


Reply

Hi
Well my no-luck with Nikon-to-Canon adapters continues Sad . Took the 5D , both adapters and couple Nikon lenses to local camera store , that I called before hand and they said they have Nikon-Canon adapters with aperture control made by Cameron . Well....those adapters fit camera perfectly...but would not fit any Nikon lenses ...neither mine AIS glass...or the G and D glass they had in store lol ....can't get a break Sad
They did try my adapters on pretty much every display EOS body they had...same thing - fits the mount...would not lock . Closest one was T5 - you were able to turn adapters a little but then got too tight and it would stop before was able to lock in ...on all the other EOS bodies it felt like adapters were hitting a hard stop somewhere . 2 Nikon adapters from 2 different manufacturers ( one came as replacement ) same issue ??????

Is there anyone on this forum that has an adapter that works and they can recommend it please ?? So far for me ...3 adapters - 3 no go Sad ....heeeeelllppppp lol


Reply

I get it. The adapters do not turn all the way to locking position because the bayonet tabs on those adapters are out-of-specification too thick, or possibly the gap between tab & adapter is too narrow. I would notify sellers, who must already be aware of the problem, ask for replacements that work.

Otherwise, BIG_IS adapters have a good reputation. My Nikon-EOS adapter works fine on my 5D!


Reply

Hi visualopsins Smile

Thank you ...found them on ebay Smile ...it's kind of shame that 2 different manufacturers sell out of spec gear Sad . It's just strange , that M42 and C/Y adapters for Canon that I got from the same company work great .
Thanks again

Derek


Reply

http://www.ebay.com/sch/i.html?_nkw=Big_IS+Nikon+EOS+Adapter


Reply

Thank you Smile .. just ordered couple of them Smile


Reply

Hi
>>>visualopsins....thank you soooo much...just got those adapters....they work perfect Smile ...thanks again for the help Smile

Derek