MFlenses - デジタル時代の新しさ
MFLenses 2026

マニュアルフォーカスレンズフォーラム

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。
スポットライト

フォーラムトップページのおすすめパートナー掲載。

Agfa Isolette II, new purchase
前のトピックへ :: 次のトピックへ  


Reply

I recently bought this camera. It is in good shape cosmetically.
The lens has a little dust on it. I don't know if that will cause any problem.
The focusing ring is a little stiff, but usable.
The shutter is working, but on the slow speeds (2 and 1) it sticks.
I found the manual online, but my version of the camera is slightly different. There is a little switch next to the viewfinder on the back of the camera. If anyone knows what that is for please let me know.
I will be using this camera on sunny to sunny with light cloudy days. What type of film should I use?
Any other suggestions or useful links would be appreciated....Here is the camera.

#1

#2


Reply

Congratulations, this is a fine camera and one that would fit in my collection nicely Wink

The switch you mention allows you to lock the shutter open when in B mode making it T mode. To be clear what I mean. For long exposures on B you must keep your finger pressed on the button. With this switch you push the release then slide the switch over to T this locks it. To close the shutter just slide it off T and it will close the shutter. This in definitely a Mk ll but the button doesnt appear on all of them

Of course you can achieve the same effect by using a locking cable release.

Use a slowish film, in my experience you run out of shutter speeds an aperures if you use a 400 film on a sunny day! I use Shanghai 100 from ebay its about £1.70 if you buy 5 and you can dev it in caffenol. Regards colour film I dont know. Others here will help you with that.

Be aware Some modern B&W film has a black backing paper making it very hard to see the numbers. I use a tiny LED torch to see the numbers. It hasn't ever affected the film.


Reply

Great camera, but bellow made from crap material, many of them leaks, first todo test bellow light tight or not, and if it has leaks , may fixable with tape easily or not. Second step bring to repair man, luckily we have a few I will give you they access in pm.


Reply

Supposedly, the Kodak 66, even though the same age, has bellows that survived the years well and they are available v.cheaply on ebay as donors.


Reply

philslizzy 氏の書き込み:
Congratulations, this is a fine camera and one that would fit in my collection nicely Wink

The switch you mention allows you to lock the shutter open when in B mode making it T mode. To be clear what I mean. For long exposures on B you must keep your finger pressed on the button. With this switch you push the release then slide the switch over to T this locks it. To close the shutter just slide it off T and it will close the shutter. This in definitely a Mk ll but the button doesnt appear on all of them

Of course you can achieve the same effect by using a locking cable release.

Use a slowish film, in my experience you run out of shutter speeds an aperures if you use a 400 film on a sunny day! I use Shanghai 100 from ebay its about £1.70 if you buy 5 and you can dev it in caffenol. Regards colour film I dont know. Others here will help you with that.

Be aware Some modern B&W film has a black backing paper making it very hard to see the numbers. I use a tiny LED torch to see the numbers. It hasn't ever affected the film.


Thanks for the info.
Are cable release shutters interchangeable or do I need a specific one for this camera?


Reply

Attila 氏の書き込み:
Great camera, but bellow made from crap material, many of them leaks, first todo test bellow light tight or not, and if it has leaks , may fixable with tape easily or not. Second step bring to repair man, luckily we have a few I will give you they access in pm.


It seems the bellows on this one is good. I guess I can buy some film at Soos. Any recommendation for first time?


Reply

fomapan 100


Reply

Attila 氏の書き込み:
fomapan 100


Thanks. Smile


Reply

All cable releases have a tapered screw thread - except for Leica, but you normally get an adapter.

heres a pic of one, the tapered bit goes into the little hole on the shutter. The disc below the plunger of the release is the locking mechanism. Some types had a screw sticking out at right angles.



Reply

philslizzy 氏の書き込み:
All cable releases have a tapered screw thread - except for Leica, but you normally get an adapter.

heres a pic of one, the tapered bit goes into the little hole on the shutter. The disc below the plunger of the release is the locking mechanism. Some types had a screw sticking out at right angles.



Thanks. Smile