MFlenses - デジタル時代の新しさ
MFLenses 2026

マニュアルフォーカスレンズフォーラム

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。
スポットライト

フォーラムトップページのおすすめパートナー掲載。

PK to EOS adaptor with aperture control
前のトピックへ :: 次のトピックへ  


Reply

Well after 2 days of effort, stretching my poor engineering skills to the limit I have sort of achieved it.

I have modified a PK to EOS adaptor so that it has semi-automatic aperture control.
I think the pictures speak for themselves but the principal is a small spring cam lever that holds the lens aperture lever in the wide open position. Once you have focussed at full aperture then a press on the cam will release the lever to the pre-set aperure.
For a new exposure you adust the lens aperture ring to full aperture which engages the lever back into the cam, then select the desired aperture again ................









By having a stepped notch on the end of the cam I have made it work with original Pentax K and Pentax M lenses.
It sort of works with Pentax A lenses but these have a lever movement that is proportional to the aperture so that the lever a large aperture lens will fall in a different position to one having a small aperture when set wide open, this would either need a multi stepped cam or a cam that could be adjusted to suit the lens.

Anyway I have achieved my aim, I've proved it can be done and mine works although it's a bit flimsy and crude. All it needs now is for someone with better engineering skills to do a bit of developement. Of course whether it would be practical to manufacture these is another matter


Reply

Clever! Bravo Cool


Reply

Pretty ingenious solution I guess this will work with any PK lens.


Reply

philslizzy 氏の書き込み:
Pretty ingenious solution I guess this will work with any PK lens.


Well I have tested it with:

Pentax K 35mm 3.5
Pentax M 28mm 2.8
Pentax M 28mm 3.5
Pentax M 50mm 1.7
Pentax A 50mm 2.8 macro
Pentax K 135mm 3.5

The only one that isn't too clever is the 50mm A, instead of holding the lens wide open it holds at about f3.5.
Another step in the cam would have cured this but the precision required was beyond my engineering skills.
All of the others work perfectly.


Reply

I have moved this to the DIY section of the forum...excellent adapter, it may inspire others. Very Happy


Reply

That's a nifty little Idea Smile Well done.


Reply

Hi,

It would be great to have a template for this, I could go to a CNC equipped technician and make 500 in 1/2 of an hour!

1US$ per each can make US$500.00 - minimum quantity: 5 - to make it go faster.

Very Happy

Cheers,

Renato


Reply

Great modification for this adapter!
Good idea!