MFlenses - デジタル時代の新しさ
MFLenses 2026

マニュアルフォーカスレンズフォーラム

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。
スポットライト

フォーラムトップページのおすすめパートナー掲載。

Need help on identifying this mount
前のトピックへ :: 次のトピックへ  


Reply

I got this Soligor lens from 2nd hand store but not 100% sure what mount it is. Is it Exakta?

If so, I'm not familiar with Exakta lenses, what do those slide switches do and do I have to do anything on them when using the lens?

Thanks

Here's a snap of the mount:



Reply



I don't have any Exacta lenses, but I think that is what it is. But, that looks like a 'chrome eared' series Soligor, of which I have many, and all of mine are T2 mount. The T2 is an interchangeable mount that unscrews off the lens and different mounts are available for different cameras. Post a side picture of the lens and it will be easier to determine if it is T2.

Looking at it again, it has aperture levers through the mount, so it might not be T2 ?


Reply

Most probaby this lens has interchangeable mounts.
This particular one is most probably Topcon (TOP) so yes it s Exakta.


Reply

I don’t know which specific mount this is, it looks like Exacta (of which I have little experience) or, given the linkages, perhaps a Topcon mount. The lens however, is a T4 system lens.
T4 lenses were sold by Soligor and Vivitar in the early 1970s and, to the best of my knowledge, were all made by Tokina. The T4 adapter system is similar to Tamron’s Adaptall system: A given lens can be used on various mounts, given the right adapter. You can read more about them at Casual Collector’s site, which has long been gone from the web, but has thankfully reappeared recently: https://sites.google.com/site/casualcollectorproject/Home/lenses/t4-for-two

On the side of the lens, there is a rectangular protrusion with the letters ‘O’ and ‘L’ on it (Open and Lock). To remove the adapter, press the chrome plated button and shift the entire protrusion counterclockwise (looking from the back).

In the middle 1970s the T4 system was replaced by the TX system. They are very similar, but the TX allows automatic exposure. Also on MFLenses there was a thread about them 5 years ago: http://forum.mflenses.com/viewtopic.php?t=9894


Reply

Thanks a lot for all the info.

Here's a side view of the lens:



It's a Soligor 200/3.5 I haven't tested it yet because I don't have an adapter yet. But I guess it's an Exakta so I'll get one for this.

As konicamera said it has a rectangular protrusion with letters 'O' and 'L' on it. So I guess it's a T4 mount with a T4 to Topcon/Exakta mount adapter.

I got it from a 2nd hand store and the store keeper doesn't know anything about the mount so thank you guys for the confirmation.
Lens looks good outside but has some piles of small scratches on the front element. But besides that, no fungus or haze, everything seems to work perfectly. I'll test it when I get the adapter and see if it's a good deal.


Reply

Yes, it's the T4 (or perhaps the TX) mount, which I also have on my Soligor 400mm.


Reply

SkedAddled 氏の書き込み:
Yes, it's the T4 (or perhaps the TX) mount, which I also have on my Soligor 400mm.


Actually TX mount is exclusive to Vivitar lenses.


Reply

TOP for Topcon - modified Exakta mount


Reply

visualopsins 氏の書き込み:
Actually TX mount is exclusive to Vivitar lenses.
If true, then it's most certainly the T4.