MFlenses - デジタル時代の新しさ
MFLenses 2026

マニュアルフォーカスレンズフォーラム

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。
スポットライト

フォーラムトップページのおすすめパートナー掲載。

Is it possible replace a Pentacon Six mount?
前のトピックへ :: 次のトピックへ  


Reply

Hallo,
I found a P6 mount lens... without the mount! I can replace it?
I would like to turn it into M42 lens.
Or I would like (as a second hypothesis) to restore the original mount.
Do you have any advise?

Thank you
Luca


Reply

what lens is that? I ask because there are some (such as the preset version of pentacon 2.8/135) that have an interchangeable mount that can be switched between p6 and m42: If your lens is one of these, you "just" need to find the right part.
Otherwise, fitting an m42 mount on a lens intended for P6 camera is surely doable, "how" depends on the lens.


Reply

Iirc you can swap the zebra versions of Pentacon 135mm and 200mm lenses to either M42 or Exa using the interchangeable mount. I doubt that there is a P6 adapter. Even if there is one you would end up with heavy vignetted or even circular images because the two lenses in question are made for 36x24mm film. P6 uses medium format film.

@ ellepi: you might try to screw a tube in the length of the missing part to the lens body (there should be three threads) and attach an adapter to it (like a P6->Eos). Keep in mind that you need the correct register distance between sensor/film and lens to achieve infinity focus.