MFlenses - デジタル時代の新しさ
MFLenses 2026

マニュアルフォーカスレンズフォーラム

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。
スポットライト

フォーラムトップページのおすすめパートナー掲載。

KIRON 1:1 macro 105mm (100mm) repair
前のトピックへ :: 次のトピックへ  


Reply

I bought a lens with stuck focusing. I was able to release it but now it's shaky. The reason is probably screw got loosen inside due to much force used to focus. Problem: i cannot remove label ring to open from front side and reach two screws on photo. I'd appreciate good advice.



Reply

Pack barrel in dry ice while warming label ring with hair dryer, shrinking the former while expanding the latter. Hope it's enough so it becomes possible to separate them. Once apart, repair damage to allow future re-assembly/dis-assembly without resort to such extraordinary measures.


Reply

guardian 氏の書き込み:
Pack barrel in dry ice while warming label ring with hair dryer, shrinking the former while expanding the latter. Hope it's enough so it becomes possible to separate them. Once apart, repair damage to allow future re-assembly/dis-assembly without resort to such extraordinary measures.


Splendid advice. I'll try. Thanks!


Reply

Didn't work. Next step Smile - see the photo. I know it looks ugly but it was necessary procedure. This was condition to remove focusing ring. And under were the holders i needed to tighten.

Posted is also photo of aperture manipulator, it has prepared different values for other mount probably. M for Minolta...