| 前のトピックへ :: 次のトピックへ |
| 作成者 |
メッセージ |
guardian
 登録日: 2009年3月18日 投稿: 1750
|
 投稿日時: 日 3月 24, 2013 2:15 pm 件名: Front/rear element flipping |
|
 投稿日時: 日 3月 24, 2013 2:15 pm 件名: Front/rear element flipping |
|
|
guardian wrote:
This is limited to lenses having front and/or rear elements which are "flippable". "Flippable" in this instance means symmetrical. A lens convex on one side and concave on the other obviously is not flippable. A lens having dissimilar curvatures front and rear is not "flippable".
That said:
What are the merits of renewing the exposed surface of a front or rear element by flipping? Depending on the lens's age and the amount of wear and tear to which it has been subjected over many years, might this not be something to consider?
For scratched lenses, would it not be better if light incident upon the lens encounters a first surface free of scratches, even if that means the exit surface will have the scratches, instead? To the extent scratches or imperfection trap dirt, would it not be better to face the scratches toward the lens's interior, where the environment is surely cleaner?
Lens flipping, when possible, seems to me something to consider. What do you think? |
|
| トップへ戻る |
|
 |
RSalles
 登録日: 2012年8月12日 投稿: 1372 所在地: Brazil - RS / South
|
 投稿日時: 日 3月 24, 2013 4:53 pm 件名: |
|
 投稿日時: 日 3月 24, 2013 4:53 pm 件名: |
|
|
RSalles wrote:
I think that is better to know which can be flipped and to avoid a lens like this from a not proven reputation's seller,
[]s,
Renato |
|
| トップへ戻る |
|
 |
Orio
登録日: 2007年2月24日 投稿: 29545 所在地: West Emilia
Expire: 2012-12-04
|
 投稿日時: 日 3月 24, 2013 5:04 pm 件名: |
|
 投稿日時: 日 3月 24, 2013 5:04 pm 件名: |
|
|
Orio wrote:
What may look like flippable, may actually be not. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| トップへ戻る |
|
 |
martinsmith99
 登録日: 2008年8月31日 投稿: 7029 所在地: S Glos, UK
Expire: 2013-11-18
|
 投稿日時: 日 3月 24, 2013 6:42 pm 件名: |
|
 投稿日時: 日 3月 24, 2013 6:42 pm 件名: |
|
|
martinsmith99 wrote:
if the lens is scratched, it's scratched, no matter which side points outwards. _________________ Casual attendance these days |
|
| トップへ戻る |
|
 |
guardian
 登録日: 2009年3月18日 投稿: 1750
|
 投稿日時: 日 3月 24, 2013 8:25 pm 件名: |
|
 投稿日時: 日 3月 24, 2013 8:25 pm 件名: |
|
|
guardian wrote:
| martinsmith99 氏の書き込み: |
| if the lens is scratched, it's scratched, no matter which side points outwards. |
Agreed
Lenses bend light, though. Light incident upon the lens's first surface, however, is not yet bent, whereas light exiting the lens already has been bent by the lens's optical properties.
Also, regarding coatings:
If the old surface has imperfections in its coating, owing for example to over-exuberant cleaning, while the flipped lens offers (to incident light) a fresh, new, and perfect coating, would that not be an advantage? Coatings matter too, of course, inside the lens. But would not the coating quality of the first surface matter more? |
|
| トップへ戻る |
|
 |
visualopsins
 登録日: 2009年3月5日 投稿: 11699 所在地: California
Expire: 2027-07-11
|
 投稿日時: 日 3月 24, 2013 10:55 pm 件名: |
|
 投稿日時: 日 3月 24, 2013 10:55 pm 件名: |
|
|
visualopsins wrote:
I don't think there are any camera lenses with any element having identical curvatures both sides.
If there are any, surely factory couldn't say which side is which, eh?
Rear element scratches show in images, while front element scratches rarely show other than loss of contrast. Scratches show when angle of incidence is steep enough... _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| トップへ戻る |
|
 |
guardian
 登録日: 2009年3月18日 投稿: 1750
|
 投稿日時: 月 3月 25, 2013 12:00 pm 件名: |
|
 投稿日時: 月 3月 25, 2013 12:00 pm 件名: |
|
|
guardian wrote:
| visualopsins 氏の書き込み: |
I don't think there are any camera lenses with any element having identical curvatures both sides.
If there are any, surely factory couldn't say which side is which, eh?
Rear element scratches show in images, while front element scratches rarely show other than loss of contrast. Scratches show when angle of incidence is steep enough... |
I appreciate your comments. First of all, I should have paid better attention in high school physics!
But just on gut instinct, and thinking about this only following the insight provided by your post, I tend to agree with you about lack of front element symmetry. This is something to which I shall be paying much more attention going forward!!  |
|
| トップへ戻る |
|
 |
|
|
|
このフォーラムでは新しいトピックを投稿できません このフォーラムではトピックに返信できません このフォーラムでは自分の投稿を編集できません このフォーラムでは自分の投稿を削除できません このフォーラムでは投票に参加できません
|