| 前のトピックへ :: 次のトピックへ |
| 作成者 |
メッセージ |
Adi06
登録日: 2012年11月10日 投稿: 1
|
 投稿日時: 土 11月 10, 2012 7:22 pm 件名: M42 adapter and Pentacon 1.8 compatibility issue, Sony Alpha |
|
 投稿日時: 土 11月 10, 2012 7:22 pm 件名: M42 adapter and Pentacon 1.8 compatibility issue, Sony Alpha |
|
|
Adi06 wrote:
Hello everyone,
I need help with an m42 to sony alpha adapter (chipped) which I'm using with a Pentacon Electric 50mm 1.8. The problem is that the lens doesn't fit all the way into the adapter as shown in pictures below. It is off by 2-3mm so I have an extension tube effect and can't focus to infinity.
I'm very new to manual lenses so I don't really know if this problem is due to the adapter or this particular lens. Can anyone help me out?
Thanks in advance,
Adrian
 |
|
| トップへ戻る |
|
 |
eddieitman
 登録日: 2011年4月12日 投稿: 1246 所在地: United Kingdom
|
 投稿日時: 土 11月 10, 2012 7:57 pm 件名: Re: M42 adapter and Pentacon 1.8 compatibility issue, Sony A |
|
 投稿日時: 土 11月 10, 2012 7:57 pm 件名: Re: M42 adapter and Pentacon 1.8 compatibility issue, Sony A |
|
|
eddieitman wrote:
| Adi06 氏の書き込み: |
Hello everyone,
I need help with an m42 to sony alpha adapter (chipped) which I'm using with a Pentacon Electric 50mm 1.8. The problem is that the lens doesn't fit all the way into the adapter as shown in pictures below. It is off by 2-3mm so I have an extension tube effect and can't focus to infinity.
I'm very new to manual lenses so I don't really know if this problem is due to the adapter or this particular lens. Can anyone help me out?
Thanks in advance,
Adrian
 |
quute so pics show _________________ My web site www.digital-darkroom.weebly.com
Life is like a camera. Focus on what's important, capture the good times, develop from the negatives and if things don't work out, just take another shot. |
|
| トップへ戻る |
|
 |
TrueLoveOne
 登録日: 2012年9月30日 投稿: 1839 所在地: Netherlands
Expire: 2013-12-24
|
 投稿日時: 水 11月 14, 2012 9:39 pm 件名: |
|
 投稿日時: 水 11月 14, 2012 9:39 pm 件名: |
|
|
TrueLoveOne wrote:
Does your adapter do this with other M42 lenses too? Or is it just this one?
I have several Pentacon lenses, and many other. I use a simple non-af-confirm adapter, and all of my lenses can focus to infinity and they all screw in "to the end".
I am also a Sony user.... all works just fine!
If the contacts on the back of the lens are the problem... you could remove them, as they are of no use to you anyway. But they should retract when screwed on a camera or adapter, there are springs underneath them.
The thread on your adapter or on your lens is not okay if you ask me.... _________________ My Flickr photostream: http://www.flickr.com/photos/chantalrene/
Sony A7, Canon 5D mkII, Minolta 7D + RD3000 and some more.....
Minolta and Konica collector.... slowly selling all the other stuff! |
|
| トップへ戻る |
|
 |
SinfulSaint
登録日: 2012年8月13日 投稿: 13 所在地: Dubrovnik, Croatia
|
 投稿日時: 木 11月 15, 2012 8:16 am 件名: |
|
 投稿日時: 木 11月 15, 2012 8:16 am 件名: |
|
|
SinfulSaint wrote:
That's a bad adapter I'd say.
Be advised that Pentacon 50/1.8 when mounted on M42 adapter can not achieve infinity focus at f2 (it can, but stays very soft).
I had to shave off some .25 mm off of my adapter to get a sharp picture at f2.
Same works for all of my M42 lenses. Pentacon 29, Helios 44M-4, 44-2 and others.
So far I've tried 3 different ebay adapters. Even big_is ones.
Sony A33 user. _________________ Non Bene Pro Toto Libertas Venditur Auro
最終編集: SinfulSaint、木 11月 15, 2012 12:30 pm、計 1 回 |
|
| トップへ戻る |
|
 |
peterqd
 登録日: 2007年2月28日 投稿: 7449 所在地: near High Wycombe, UK
Expire: 2014-01-04
|
 投稿日時: 木 11月 15, 2012 10:52 am 件名: |
|
 投稿日時: 木 11月 15, 2012 10:52 am 件名: |
|
|
peterqd wrote:
Yes to Martin about removing the contacts. If you look at a Praktica camera this lens was designed for, the "track" which the contacts touch is recessed slightly. This allows the mount faces to come together as they should. The adapter you're using does not have this recess. This sounds the most likely reason for your problem.
Another possibility that affects fast lenses with large rear elements is that the hole in the pin flange (the lip that depresses the auto aperture pin) is too small and the rear element jams in it. I had this problem with the Takumar 1.4/50. You can test this by turning the lens to the minimum focus distance before mounting and the lens should screw in fully. I think this is less likely with your 1.8 lens, although member NewStuff did report yeserday that he couldn't mount a Pentacon 1.8/50 on his new NEX adapter.
You don't need the electrical contacts unless you're using a Praktica camera, so they can be removed with no loss of function. You also don't really need the pin flange as this lens will stop down using the Auto/Manual switch. If the flange is the problem, you might be able to remove it altogether if you take out the threaded shiny part of the adapter. There are usually three small pointed clamping screws. Make sure when you re-assemble that the screw points relocate back into the original positions. _________________ Peter - Moderator |
|
| トップへ戻る |
|
 |
|
|
|
このフォーラムでは新しいトピックを投稿できません このフォーラムではトピックに返信できません このフォーラムでは自分の投稿を編集できません このフォーラムでは自分の投稿を削除できません このフォーラムでは投票に参加できません
|