MFlenses - デジタル時代の新しさ
MFLenses 2026

マニュアルフォーカスレンズフォーラム

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。
スポットライト

フォーラムトップページのおすすめパートナー掲載。

CZ Flektogon 35mm f2.8 Zebra Exacta mount assembly problem!
前のトピックへ :: 次のトピックへ  


Reply

Hi everyone,
i bought a Carl Zeiss Flektogon 35mm f2.8 Zebra Exacta mount and the focus ring was pretty stiff, so i took it apart and put some oil in there. Nor this works fine, but, now i can't put the last part back! that button worked, and there must me a special way it gets in, i didn't pay attention when unscrewing it. Had any one such repairs done? I mean only in Exacta mount, because a Flektogon 20mm f4 in m42 mount was piece of cake!! please help!


Reply

Buga 氏の書き込み:
Hi everyone,
i bought a Carl Zeiss Flektogon 35mm f2.8 Zebra Exacta mount and the focus ring was pretty stiff, so i took it apart and put some oil in there. Nor this works fine, but, now i can't put the last part back! that button worked, and there must me a special way it gets in, i didn't pay attention when unscrewing it. Had any one such repairs done? I mean only in Exacta mount, because a Flektogon 20mm f4 in m42 mount was piece of cake!! please help!


Reply

Your picture didn't showed because of it being your first post, (anti spam)

Not sure about what you mean by adding oil? if you put oil on the focusing helicoid you will have big problems later on the aperture blades, I hope you only put grease.

About the mount part, you need to keep that button pressed while you put it back with the rest of the lens. Hope this helps.