MFlenses - デジタル時代の新しさ
MFLenses 2026

マニュアルフォーカスレンズフォーラム

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。
スポットライト

フォーラムトップページのおすすめパートナー掲載。

Digitizing slides, help
前のトピックへ :: 次のトピックへ  


Reply

Hello everybody.

I remember reading in the forum some threads about digitizing slides using a dslr.
I tried with search function but I just couldn't find them.

If anybody remembers the thread or wants to help me with that it will be much appreciated.


Reply

Ciao!
May I suggest that you use the
following search phrase in google:
digitize slides site:mflenses.com
Using the site modifier is a very good trick.


Reply

You need a bellows and an adaptable lens
I had good success using an M42 bellows (with EOS adapter on the camera's end) and an Industar 50mm macro lens,
value about 40-50 Euros.
On the end of the bellows you need to attach a slide holder, they can be found easily on Ebay (usually together with the bellows)
My camera was the 5D, if you use an APS-C camera you'll probably need a shorter focal lenght to fit the whole frame in.
For illumination, you can use a flash, or you can use a continuous light source with a diffuser.
With the continuous light, you will have of course to balance the white.


Reply

Great.
I found the thread with jesito's double bellows set up, but I think I'll try with one first.

Thank you both very much.


Reply

For slides, an (untested) idea is to use a slide projector to handle the slides, and to provide smooth condensed light. Place slides in tray. Very Happy Remove the lens from the projector. Focus macro lens on the slide. Press camera shutter button; press projector advance button; repeat. So quick to digitize many slides, in no time.


Reply

I tried that, with the projector, but it looks like it needs something to diffuse the light of the projector lamp, because it comes out quite uneven all over the frame, and definitely too bright. At f22, 1/4000 sec 100 iso the extreme corners were ok (too bright but recoverable) in terms of exposure, while the center was almost completely white. I didn't try with nd, but anyway it seems to be too much difference.

With the projector lens on it looked a bit more uniform, but however way too bright.


Reply

Forget ND-Filter. Simply change the ~250W bulb with a ~20W bulb Cool If it's halogen (as most slide projectors for amateurs) it should be no problem.

If your backlight is uneven, try get some frosted/milk glass at a local gaffer (4x4cm should cost around 1,5-5€). Paper might work as well instead of glass but be careful, it might catch fire (it happened once here Smile) and it kills many F-stops and might influence the quality of the result (depending on place in the projector); glass works a lot better imho. If you contrast is too high (yes that's sometimes a real problem) you could remove some parts of the optics from the projector.
I digitalized more than a thousand slides with this technique.




Rodagon 80mm or 105mm are also working pretty very well for reproduction, as well as practically every decent macro lens (Minolta MD, Canon FD, Macro Nikkor,...).
There are also a few lenses which are made for 1:1-1:2 reproduction and digitalisation, like Apo Rodagon R and Apo Rodagon D - You can get them sometimes between 120-240€ on Ebay.


Reply

Actually I didn't think about changing the lamp: it seems so obvious now!

Thanks for the tips: I think I will go this way, since I already have everything I need here.


Reply

Ok, following your advices here and in other threads, I ended up with a very rough setup: an old rollei projector, lens removed. Couldn't find the frosted glass in the two stores nearby, so I used some frost paper, two layers, between the slide and the glass elements in front of the lamp.
I mounted a Sigma 70-300 apo macro (nikon mount, glassless adapter, around 1:2 magnification) on my a55, aimed at the projector, and it worked: i managed to get around 11megaPixels digital raws of my slides, which is very good. The field seems not completely flat, however, and in some case the corners seem blurred and show some fringing.

The frost paper is not a great idea: while quite resistant to heat (it's made to be used in front of much more powerful lights, after all), there's not enough room in my projector to set it completely flat, so every now and then I had to set it up again. And sometimes it gives the slides some kind of texture.

So, the next upgrades will be: frosted glass and a proper macro/reproduction lens, 1:2 magnification looks ok to me

Anyway, I'm really happy with the results: they already look much better to me than the ones from my local lab with this rough setting up, so they can only get better.

Thanks again.


Reply

Orio 氏の書き込み:
My camera was the 5D, if you use an APS-C camera you'll probably need a shorter focal lenght to fit the whole frame in.

Hi Orio, I tried this some time ago with my 400D (APS-C) on the Pentax bellows with slide copier extension. It wasn't possible with any of my lenses to get the whole slide in focus. Very strangely, a wide angle lens makes things worse. A lens about 65-70mm would be ideal, but I don't have one. The 85 Tak and my zooms were all too long physically. My best attempt was using a 58mm Helios 44, but still with a slight crop. Longer bellows rails would be the answer.


Reply

With my (old) M42 Helios 44-2 I got very bad results. Low contrast (mostly due flare), slightly curved focus and annoying focus shift while stopping own.
I tried many normal lenses on bellows and tubes. All having some issues.

Enlarger- above 50mm, repro- and proper macro primes generally do much better in my experience than very most usual taking lenses on extension. They have a high resolution and usually they don't have any focus shift, curved focus or serious flare issues.