| 前のトピックへ :: 次のトピックへ |
| 作成者 |
メッセージ |
std
 登録日: 2010年2月9日 投稿: 1826 所在地: Bulgaria
|
 投稿日時: 水 6月 27, 2012 1:08 pm 件名: Jupiter 9 Kiev - dissasembly? |
|
 投稿日時: 水 6月 27, 2012 1:08 pm 件名: Jupiter 9 Kiev - dissasembly? |
|
|
std wrote:
I've got an early Jupiter 9 in Kiev mount and i want to take it apart and clean it.
The body is very dirty and grease need to be changed as the focusing is very stif.
Also the lens flares so much to an extent it is almost unusable. Stopping down just makes things even worse.
I guess it can benefit from a cleaning of the glass and maybe some black paint on the inside.
This is what i have found so far but it's not complete - i also need to dismantle the lens block
http://www3.telus.net/public/rpnchbck/Jupiter-9%20dismantle.html
Can someone direct me to a similar tutorial where it is shown how to dismantle the front part too.
Thanks _________________ Stefan
My lens list:
SLR MD: Rokkor 1,7/50 Exakta: Kilfitt-Makro-Kilar E 3.5/4cm; CZJ 2/50 Pancolar;M42: CZJ 2.8/50 Tessar; Mir-1B 2.8/37; Jupiter-9 2/85 T-mount: Tamron 5.9/200; Tamron 6.9/300; Tamron 7.5/400 C-mount: Cosmicar 1.8/50 Y/S: Sun 3.5/38-90, Sun 4/70-210 RF Contax RF: Jupiter-8 2/50; Contax G:CZ 2,8/21 Biogon T; CZ 2,8/28 Biogon T; CZ 2/35 Planar T; CZ 2/45 Planar T; CZ 2,8/90 Sonnar T |
|
| トップへ戻る |
|
 |
themoleman342
 登録日: 2007年10月21日 投稿: 2190 所在地: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 投稿日時: 水 6月 27, 2012 1:50 pm 件名: |
|
 投稿日時: 水 6月 27, 2012 1:50 pm 件名: |
|
|
themoleman342 wrote:
Removing the front part should just be standard procedure. Take off nameplate. Front element should pop out. Spacer. Element group. The back elements should come off as an entire block. |
|
| トップへ戻る |
|
 |
std
 登録日: 2010年2月9日 投稿: 1826 所在地: Bulgaria
|
|
| トップへ戻る |
|
 |
themoleman342
 登録日: 2007年10月21日 投稿: 2190 所在地: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 投稿日時: 水 6月 27, 2012 7:50 pm 件名: |
|
 投稿日時: 水 6月 27, 2012 7:50 pm 件名: |
|
|
themoleman342 wrote:
I think take screw #2 out. Then the chrome portion should unscrew counterclockwise. |
|
| トップへ戻る |
|
 |
std
 登録日: 2010年2月9日 投稿: 1826 所在地: Bulgaria
|
 投稿日時: 水 6月 27, 2012 8:13 pm 件名: |
|
 投稿日時: 水 6月 27, 2012 8:13 pm 件名: |
|
|
std wrote:
OK i have successfully unscrewed also 1, 2 and 3 and removed the black ring and the back lens group.
Still i can't figure out how to remove the front group which is before the aperture.
#1
Seems that the front part ( the shiny one) is made of two pieces but i can't unscrew them. _________________ Stefan
My lens list:
SLR MD: Rokkor 1,7/50 Exakta: Kilfitt-Makro-Kilar E 3.5/4cm; CZJ 2/50 Pancolar;M42: CZJ 2.8/50 Tessar; Mir-1B 2.8/37; Jupiter-9 2/85 T-mount: Tamron 5.9/200; Tamron 6.9/300; Tamron 7.5/400 C-mount: Cosmicar 1.8/50 Y/S: Sun 3.5/38-90, Sun 4/70-210 RF Contax RF: Jupiter-8 2/50; Contax G:CZ 2,8/21 Biogon T; CZ 2,8/28 Biogon T; CZ 2/35 Planar T; CZ 2/45 Planar T; CZ 2,8/90 Sonnar T |
|
| トップへ戻る |
|
 |
std
 登録日: 2010年2月9日 投稿: 1826 所在地: Bulgaria
|
 投稿日時: 水 6月 27, 2012 8:28 pm 件名: |
|
 投稿日時: 水 6月 27, 2012 8:28 pm 件名: |
|
|
std wrote:
| themoleman342 氏の書き込み: |
| I think take screw #2 out. Then the chrome portion should unscrew counterclockwise. |
You were right!
Thanks a lot
After cooling it a bit in the freezer i was able to finally unscrew it.
and now i have 2 pieces  _________________ Stefan
My lens list:
SLR MD: Rokkor 1,7/50 Exakta: Kilfitt-Makro-Kilar E 3.5/4cm; CZJ 2/50 Pancolar;M42: CZJ 2.8/50 Tessar; Mir-1B 2.8/37; Jupiter-9 2/85 T-mount: Tamron 5.9/200; Tamron 6.9/300; Tamron 7.5/400 C-mount: Cosmicar 1.8/50 Y/S: Sun 3.5/38-90, Sun 4/70-210 RF Contax RF: Jupiter-8 2/50; Contax G:CZ 2,8/21 Biogon T; CZ 2,8/28 Biogon T; CZ 2/35 Planar T; CZ 2/45 Planar T; CZ 2,8/90 Sonnar T |
|
| トップへ戻る |
|
 |
|
|
|
このフォーラムでは新しいトピックを投稿できません このフォーラムではトピックに返信できません このフォーラムでは自分の投稿を編集できません このフォーラムでは自分の投稿を削除できません このフォーラムでは投票に参加できません
|