| 前のトピックへ :: 次のトピックへ |
| 作成者 |
メッセージ |
kyonthinh
 登録日: 2012年3月30日 投稿: 222 所在地: Germany
|
 投稿日時: 水 4月 18, 2012 3:12 pm 件名: Weston Master III problem |
|
 投稿日時: 水 4月 18, 2012 3:12 pm 件名: Weston Master III problem |
|
|
kyonthinh wrote:
I bought this one along with my cameras and lenses for 15 bucks. It works!
But there is a problem. When I set to exposure 100 with it, I must set my camera to Iso 200 to have correct exposure, 200 and 400 and more. Am I wrong because I dont know how to use it, or this one need to calibrate?
 |
|
| トップへ戻る |
|
 |
Excalibur
 登録日: 2009年7月19日 投稿: 5018 所在地: UK
Expire: 2014-04-21
|
 投稿日時: 水 4月 18, 2012 3:38 pm 件名: |
|
 投稿日時: 水 4月 18, 2012 3:38 pm 件名: |
|
|
Excalibur wrote:
erm Doesn't look like my III or IV maybe for the US market or a later model...anyway basically you set the asa, then decide for bright or dim light by opening the back, then point the meter at the subject and the needle will stop at a number in the window, then turn dial with the big arrow until it lines up with the number that the needle showed in the window, then read what shutter speed/aperture that you would want to use. _________________ Canon A1, AV1, T70 & T90, EOS 300 and EOS300v, Chinon CE and CP-7M. Contax 139, Fuji STX-2, Konica Autoreflex TC, FS-1, FT-1, Minolta X-700, X-300, XD-11, SRT101b, Nikon EM, FM, F4, F90X, Olympus OM2, Pentax S3, Spotmatic, Pentax ME super, Praktica TL 5B, & BC1, , Ricoh KR10super, Yashica T5D, Bronica Etrs, Mamiya RB67 pro AND drum roll:- a Sony Nex 3
.........past gear Tele Rolleiflex and Rollei SL66.
Many lenses from good to excellent. |
|
| トップへ戻る |
|
 |
skida
 登録日: 2012年3月2日 投稿: 1826 所在地: North East England
|
 投稿日時: 水 4月 18, 2012 3:55 pm 件名: |
|
 投稿日時: 水 4月 18, 2012 3:55 pm 件名: |
|
|
skida wrote:
There is a user's manual here:
http://www.urmonas.net/manuals/westonIII/westonIII.html
The one in the manual may be different, but I am sure the methods will be the same. |
|
| トップへ戻る |
|
 |
Jesito
 登録日: 2007年8月24日 投稿: 5745 所在地: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 投稿日時: 水 4月 18, 2012 4:21 pm 件名: |
|
 投稿日時: 水 4月 18, 2012 4:21 pm 件名: |
|
|
Jesito wrote:
If I'm not wrong, the earlier Weston meters used the Weston Units instead of ASA.
The equivalence is Weston 80 = ISO 100.
Not sure if that one is in the case, my Weston III (that looks different from yours) is.
http://forum.mflenses.com/notes-on-repairing-weston-master-iii-light-meter-t16996,highlight,%2Bweston.html
Regards.
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3
最終編集: Jesito、木 4月 19, 2012 3:44 am、計 1 回 |
|
| トップへ戻る |
|
 |
kyonthinh
 登録日: 2012年3月30日 投稿: 222 所在地: Germany
|
 投稿日時: 水 4月 18, 2012 4:22 pm 件名: |
|
 投稿日時: 水 4月 18, 2012 4:22 pm 件名: |
|
|
kyonthinh wrote:
Thanks both of you, and yes, I have done the correct process before I asked. So it's the same as before, ex: if I set exposure 100, f5.6 so it points to 500 speed, then I must set my camera to iso 200 with f5.6, 500 speed and I will have absolutely correct exposure.
@ I have just checked the back, and it writes ASA=1.0, so I think this is ASA scale. |
|
| トップへ戻る |
|
 |
skida
 登録日: 2012年3月2日 投稿: 1826 所在地: North East England
|
 投稿日時: 水 4月 18, 2012 4:43 pm 件名: |
|
 投稿日時: 水 4月 18, 2012 4:43 pm 件名: |
|
|
skida wrote:
Does it use batteries? If it does and the originals were mercury then alkaline batteries can give false readings. |
|
| トップへ戻る |
|
 |
Excalibur
 登録日: 2009年7月19日 投稿: 5018 所在地: UK
Expire: 2014-04-21
|
 投稿日時: 水 4月 18, 2012 4:50 pm 件名: |
|
 投稿日時: 水 4月 18, 2012 4:50 pm 件名: |
|
|
Excalibur wrote:
| skida 氏の書き込み: |
| Does it use batteries? If it does and the originals were mercury then alkaline batteries can give false readings. |
No batteries and the meters can last for ages, I bought mine S/H about 30 years ago and it is still accurate...hey I still have the receipt bought in 24/10/1980 for £15 _________________ Canon A1, AV1, T70 & T90, EOS 300 and EOS300v, Chinon CE and CP-7M. Contax 139, Fuji STX-2, Konica Autoreflex TC, FS-1, FT-1, Minolta X-700, X-300, XD-11, SRT101b, Nikon EM, FM, F4, F90X, Olympus OM2, Pentax S3, Spotmatic, Pentax ME super, Praktica TL 5B, & BC1, , Ricoh KR10super, Yashica T5D, Bronica Etrs, Mamiya RB67 pro AND drum roll:- a Sony Nex 3
.........past gear Tele Rolleiflex and Rollei SL66.
Many lenses from good to excellent. |
|
| トップへ戻る |
|
 |
kyonthinh
 登録日: 2012年3月30日 投稿: 222 所在地: Germany
|
 投稿日時: 水 4月 18, 2012 5:15 pm 件名: |
|
 投稿日時: 水 4月 18, 2012 5:15 pm 件名: |
|
|
kyonthinh wrote:
It has selenium cell, so there is no battery.
It has better result than my nova metering, but I really want to know why it has that problem. |
|
| トップへ戻る |
|
 |
luisalegria
 登録日: 2008年3月7日 投稿: 6602 所在地: San Francisco, USA
Expire: 2018-01-18
|
 投稿日時: 水 4月 18, 2012 7:47 pm 件名: |
|
 投稿日時: 水 4月 18, 2012 7:47 pm 件名: |
|
|
luisalegria wrote:
What camera are you using ?
Are you checking the Weston meter against the camera meter ?
I often have different readings depending on the meter.
These handheld meters are not spot or center weighted meters, they measure light coming in over a wide angle, so they have to be used with care.
I check meter readings like this - where possible I look for a spot where the light I want to meter is falling on my hand. Then I point the meter at my hand. Its like using a grey card.
Another way to check is to use 'sunny 16' in bright sunlight.
Set ISO =100, point meter at brightly lit building. At 100 speed it should read on or close to f/16
My usual meter, always in my pocket, is a little plastic Selenium cell Sekonic I bought when I was a teenager in 1975. It still works. _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| トップへ戻る |
|
 |
kyonthinh
 登録日: 2012年3月30日 投稿: 222 所在地: Germany
|
 投稿日時: 水 4月 18, 2012 9:07 pm 件名: |
|
 投稿日時: 水 4月 18, 2012 9:07 pm 件名: |
|
|
kyonthinh wrote:
I use Sony Alpha 580, and yes i check the camera meter against the meter.
I also checked in close range, and it has 1/3-2/3 stop slower than camera metering, but it's still an acceptable result. And more interesting, my weimar lux nova with Cds cant be used in my room with only one light source, but the Weston can. |
|
| トップへ戻る |
|
 |
visualopsins
 登録日: 2009年3月5日 投稿: 11698 所在地: California
Expire: 2027-07-11
|
 投稿日時: 金 4月 20, 2012 2:20 am 件名: Re: Weston Master III problem |
|
 投稿日時: 金 4月 20, 2012 2:20 am 件名: Re: Weston Master III problem |
|
|
visualopsins wrote:
| kyonthinh 氏の書き込み: |
I bought this one along with my cameras and lenses for 15 bucks. It works!
But there is a problem. When I set to exposure 100 with it, I must set my camera to Iso 200 to have correct exposure, 200 and 400 and more. Am I wrong because I dont know how to use it, or this one need to calibrate?
 |
looks like mine -- model 737
when I set dials on mine to same settings as shown in photo above, the "Exposure Index" is at 320 Weston units. Set at 80 for iso 100. _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| トップへ戻る |
|
 |
kyonthinh
 登録日: 2012年3月30日 投稿: 222 所在地: Germany
|
 投稿日時: 金 4月 20, 2012 2:23 pm 件名: Re: Weston Master III problem |
|
 投稿日時: 金 4月 20, 2012 2:23 pm 件名: Re: Weston Master III problem |
|
|
kyonthinh wrote:
| visualopsins 氏の書き込み: |
looks like mine -- model 737
when I set dials on mine to same settings as shown in photo above, the "Exposure Index" is at 320 Weston units. Set at 80 for iso 100. |
+1.
Now I know it's always nearly correct, or something it's correct... |
|
| トップへ戻る |
|
 |
visualopsins
 登録日: 2009年3月5日 投稿: 11698 所在地: California
Expire: 2027-07-11
|
 投稿日時: 土 4月 21, 2012 7:09 am 件名: Re: Weston Master III problem |
|
 投稿日時: 土 4月 21, 2012 7:09 am 件名: Re: Weston Master III problem |
|
|
visualopsins wrote:
| kyonthinh 氏の書き込み: |
| visualopsins 氏の書き込み: |
looks like mine -- model 737
when I set dials on mine to same settings as shown in photo above, the "Exposure Index" is at 320 Weston units. Set at 80 for iso 100. |
+1.
Now I know it's always nearly correct, or something it's correct... |
The dials are always correct. The dials are only circular slide rule; they don't affect meter reading.
In the photo, Exposure Index is set to 320 (iso 400); it works!
There is an attachment -- the Invercone -- a translucent dome that fits over the light cell to convert the meter to measure incident light. I use mine as incident meter. _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| トップへ戻る |
|
 |
kyonthinh
 登録日: 2012年3月30日 投稿: 222 所在地: Germany
|
 投稿日時: 土 4月 21, 2012 10:37 am 件名: Re: Weston Master III problem |
|
 投稿日時: 土 4月 21, 2012 10:37 am 件名: Re: Weston Master III problem |
|
|
kyonthinh wrote:
| visualopsins 氏の書き込み: |
The dials are always correct. The dials are only circular slide rule; they don't affect meter reading.
In the photo, Exposure Index is set to 320 (iso 400); it works!
There is an attachment -- the Invercone -- a translucent dome that fits over the light cell to convert the meter to measure incident light. I use mine as incident meter. |
Yes, it's always correct, and now I know why people liked it.
Thank you very much. |
|
| トップへ戻る |
|
 |
|
|