MFlenses - デジタル時代の新しさ
MFLenses 2026

マニュアルフォーカスレンズフォーラム

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。
スポットライト

フォーラムトップページのおすすめパートナー掲載。

Hexanon AR on Oly E-PL1
前のトピックへ :: 次のトピックへ  


Reply

I have a nice Hexanon AR 40mm f1.8 MF pancake lens I'm trying to whip into shape for use on my Olympus E-PL1 (m4/3).

The lens has an "AE" setting which I don't really understand. Does that setting have relevance only when the lens is used on film cameras? Or is it a setting which also would have application when the lens is put to use on the Olympus?


Reply

AE=autoexposure. when set to AE when on konica film cam you set shutter speed and camera sets aperture for proer exposure.
tony


Reply

the AE setting is only for film. When you use the lens (or any adapted lens except four thirds digital lenses or Canon EOS) you will be setting the aperture yourself choosing 1.8 through 22, never using the AE setting on the lens.

FYI there is a little metal tab that should be depressed to switch out of AE mode. This is not required when dealing with just the lens but when the mount is attached to the lens you will need to push this metal button to move out of AE mode should you happen to set it there by mistake or something.


Reply

Got it. Thanks, guys. Much appreciated!!


Reply

When you select AE, it closes the aperture to the minimum setting. As ramcewan says, you select the aperture manually, AE is only for the Konica film SLRs that had AE modes and therefor useless on digital.