MFlenses - デジタル時代の新しさ
MFLenses 2026

マニュアルフォーカスレンズフォーラム

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。
スポットライト

フォーラムトップページのおすすめパートナー掲載。

Patent pending FD to EOS adapter (glass free)
前のトピックへ :: 次のトピックへ  


Reply

ここをクリックしてeBayで見る


Reply

edited:
pedning --> pending
DF --> FD


Reply

As I mentioned before here, this is a very good adapter. I'm just not quite sure what aspect of it can be patented, people have been making thin glassless FD - Eos adapters for some time now. And it is essentially a ring with a (patented?) Canon FD mount on one side and a Canon EF mount on the other. His version with the flange to disengage the automatic aperture of the FD lens works well though.


Reply

Iam using this adapter with good results.
It is the thinnest adapter to use FD lenses on an EOS body. And very well made too!
However, a caveat is that, because it is very thin, the FD lens diafragm lever is protruding too much to use FD lenses on my 5DmkII body.
On EF-S bodies there is no problem.
If you file the FD lens diafragm lever a bit (about a millimeter) down this problem is solved.
For me this is the best solution to use my exellent FD macro lens on EOS.


最終編集: Gertjan、火 10月 25, 2011 7:18 am、計 1 回


Reply

Gertjan 氏の書き込み:
Iam using this adapter with good results.
It is the thinnest adapter to use FD lenses on an EOS body. And very well made too!
However, a caveat is that, because it is very thin, the FD lens diafragm lever is protruding too much to use FD lenses on my 5DmkII body.
On EF-S bodies there is no problem.
If you file the FD lens diafragm lever a bit (half a millimeter) down this problem is solved.
For me this is the best solution to use my exellent FD macro lens on EOS.


Which FD L glass are you using it for?


Reply

StingOM,
I am using this adapter with my FDn 50mm f3.5 Macro.
Not an L lens, but at around 2:1 to 1:1 it beats my Leica Elmarit 60mm Macro and my Zeiss ZE 100mm Makro-Planar!
(looking at overall sharpness and contrast, including corners in a flat plane, for reproduction on a 5DmkII)


Reply

Gertjan 氏の書き込み:
StingOM,
I am using this adapter with my FDn 50mm f3.5 Macro.
Not an L lens, but at around 2:1 to 1:1 it beats my Leica Elmarit 60mm Macro and my Zeiss ZE 100mm Makro-Planar!
(looking at overall sharpness and contrast, including corners in a flat plane, for reproduction on a 5DmkII)


I see. For macro shots, would a regular/cheaper FD to EOS (glassless) adapter not do? Confused


Reply

Of course any glassless adapter will work for macro, but it acts as an extra extension ring.
My regular FD to EOS adapter is about 9mm thick, and with the FDn 50mm Macro it gives me a maximum focus distance of about 30cm (=12inch)
The EdMica adapter is 0,75mm thick, and now I have a maximum focus distance of 75cm (30inch)
So now I can photograph objects of sizes up to 40 x 30cm (=18 by 12 inch) instead of just 13x9cm (= 5 by 3,5 inch)

I also had hopes that with this very thin adapter I could use the rest of my FD lens collection on my 5DmkII.
I knew of course that focusing to Infinity would not be possible, but focusing to about portrait distance would be good enough.
Unfortunately the problem of the too far protruding diaphragm pin prevented this. (although it works perfect on my 7D)
And I am not yet willing to shave an millimeter off those pins, as the usage on my FD film bodies (A1, AE1program) then becomes dicey.

On the plus side this adapter is very well made to very tight tolerances. This means the lens is tight on the camera, without any play what so ever.
A Joy to use compared to all those Chinese adapters!


Reply

Gertjan 氏の書き込み:
Of course any glassless adapter will work for macro, but it acts as an extra extension ring.
My regular FD to EOS adapter is about 9mm thick, and with the FDn 50mm Macro it gives me a maximum focus distance of about 30cm (=12inch)
The EdMica adapter is 0,75mm thick, and now I have a maximum focus distance of 75cm (30inch)
So now I can photograph objects of sizes up to 40 x 30cm (=18 by 12 inch) instead of just 13x9cm (= 5 by 3,5 inch)

I also had hopes that with this very thin adapter I could use the rest of my FD lens collection on my 5DmkII.
I knew of course that focusing to Infinity would not be possible, but focusing to about portrait distance would be good enough.
Unfortunately the problem of the too far protruding diaphragm pin prevented this. (although it works perfect on my 7D)
And I am not yet willing to shave an millimeter off those pins, as the usage on my FD film bodies (A1, AE1program) then becomes dicey.

On the plus side this adapter is very well made to very tight tolerances. This means the lens is tight on the camera, without any play what so ever.
A Joy to use compared to all those Chinese adapters!


Thanks for the kind words about the high quality of product we put out Gertjan. Our new 0.5mm FD-EOS adapter overcomes the damage issue on the full frame bodies caused by the aperture lever by allowing you to mount your lenses both normal and sideways. It even has a third approach for moving the lever away from the area it hits by giving an extra notch that tells you that you have bent your lever inward enough to clear (less permanent than shaving). -Ed Mika