MFlenses - デジタル時代の新しさ
MFLenses 2026

マニュアルフォーカスレンズフォーラム

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。
スポットライト

フォーラムトップページのおすすめパートナー掲載。

Dkl retina adapter to Contax RTS body
前のトピックへ :: 次のトピックへ  


Reply

After much searching to no avail, can anyone out there confirm if an adapter exists to mount DKL Retina lenses to a contax RTS (original RTS) (C/y mount adapter)

My go to camera is a Retina Reflex III and as such I have 7 lenses. I recently purchased a Contax RTS to go with the motor drive and 250 exposure back.

Seems that there are many other adapters out there for DKL lenses to be adapted to other systems however this one seems to harder to find. Ebay has been checked extensively however I'm either not search with the correct criteria or such a beast may not exist.

Any assistance would be appreciated.

Thanks in advance

Martin


Reply

I never seen ever, most adapter make by third party makers to popular digital camera systems.


Reply

msteen1314 氏の書き込み:
After much searching to no avail, can anyone out there confirm if an adapter exists to mount DKL Retina lenses to a contax RTS (original RTS) (C/y mount adapter)

I'm not aware of any such adapter, but you can probably use a combination of two to achieve the desired result. Adapters are available from Retina Reflex to M42 screw, and from M42 screw to Contax/Yashica. As each type individually allows infinity focusing the combination should too, but as there are two lots of tolerances for the manufacturers to get wrong...


Reply

Thanks Dave, it's an interesting approach to the problem and as the adapters are relatively inexpensive it may be worth a look.

The stacking of adapters may be an issue for the reason you stated.

Thanks again

Martin


Reply

If you are stacking adapters then making them both bayonets if possible might be easier than having a screw mount in there as they are a more snug fit.


Reply

Today I saw Retina M42 adapter on Ebay , M42 contax adapter is exists ,so you can do what you like.


Reply

William 氏の書き込み:
If you are stacking adapters then making them both bayonets if possible might be easier than having a screw mount in there as they are a more snug fit.

Yes, I agree that two bayonet fittings are better where possible, but I'm not aware of any bayonet adapters for Contax/Yashica that allow infinity focusing. As far as I know, M42 screw is the only fitting common to both Retina Reflex (DKL) and Contax/Yashica adapters. Screw adapters can sometimes work loose (especially with older lenses and their often stiff focusing actions), but as Martin has such an impressive collection of lenses it may be worth permanently fixing the two adapters together if this is a problem?