| 前のトピックへ :: 次のトピックへ |
| 作成者 |
メッセージ |
iangreenhalgh1
 登録日: 2011年3月18日 投稿: 15679
Expire: 2014-01-07
|
 投稿日時: 水 7月 06, 2011 1:45 pm 件名: Petri V6 SLR with 1.8/55 and 4/200 lenses |
|
 投稿日時: 水 7月 06, 2011 1:45 pm 件名: Petri V6 SLR with 1.8/55 and 4/200 lenses |
|
|
iangreenhalgh1 wrote:
Hi folks
I've been collecting Petri lenses ever since I picked up a 1.8/55 for 99p and found it to be a stunning little lens.
So when I saw a pair of Petri V6 SLRs, each with a 1.8/55 lens and a 4/200 in leather case with them for 15ukp I snapped them up.
One camera is a mess, seems to be jammed and is dirty and corroded, the mirror is missing. I plan to remove the mount from this one to make a Petri-EOS converter. I converted the 1.8/55 and 2.8/35 Petris I already had by replacing the petri bayonet with an M42-EOS adapter trimmed, they work great but I regret doing this now as I would have liked to have them in original condition.
The other Petri camera is a bit dirty and has a little corrosion but it seems to be fully working, shutter fires at all speeds and the inside is very clean, once I've cleaned it up, it should work nicely, feels like a very well made camera, surprisingly heavy.
The 4/200 Petri lens is beautiful, looks mint. It's a very long and thin lens and surprisingly lightweight, be interesting to compare this to my Pentacon 4/200. I have 5 or 6 more 200mm lenses but I don't think any of them are very good.
I'll take some pics of the camera and lenses when I've cleaned them up. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| トップへ戻る |
|
 |
iangreenhalgh1
 登録日: 2011年3月18日 投稿: 15679
Expire: 2014-01-07
|
|
| トップへ戻る |
|
 |
martinsmith99
 登録日: 2008年8月31日 投稿: 7029 所在地: S Glos, UK
Expire: 2013-11-18
|
 投稿日時: 水 7月 06, 2011 4:16 pm 件名: |
|
 投稿日時: 水 7月 06, 2011 4:16 pm 件名: |
|
|
martinsmith99 wrote:
Camera looks in great condition. What are those two studs/buttons above the shutter release? _________________ Casual attendance these days |
|
| トップへ戻る |
|
 |
iangreenhalgh1
 登録日: 2011年3月18日 投稿: 15679
Expire: 2014-01-07
|
 投稿日時: 水 7月 06, 2011 4:26 pm 件名: |
|
 投稿日時: 水 7月 06, 2011 4:26 pm 件名: |
|
|
iangreenhalgh1 wrote:
Good question, I can only think they are for attaching some accessory like a light meter.
While the assembled 1.8/55 has coating marks I can't remove, the other one is perfect, just need to put the two halves back together and I have a lovely camera with an almost mint 1.8/55, 2/400 and 2xTC.
Looking forward to putting a film through this but probably need to replace the light seals first, very gunky. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| トップへ戻る |
|
 |
iangreenhalgh1
 登録日: 2011年3月18日 投稿: 15679
Expire: 2014-01-07
|
 投稿日時: 水 7月 06, 2011 11:42 pm 件名: |
|
 投稿日時: 水 7月 06, 2011 11:42 pm 件名: |
|
|
iangreenhalgh1 wrote:
I have thrown away the other camera, a Petri Flex V3, it was badly corroded and not worth keeping, I am under pressure to keep the place tidy and not cluttered with camera equipment so in the recycling bin it went.
I found out what those two studs are for - a large and unwieldy CDS cell light meter:
http://www.butkus.org/chinon/petri/petri_cds_meter/petri_cds_exposure_meter.htm
I think my handheld Weston Master III will do fine instead of strapping one of those big things to the camera. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| トップへ戻る |
|
 |
|
|
|
このフォーラムでは新しいトピックを投稿できません このフォーラムではトピックに返信できません このフォーラムでは自分の投稿を編集できません このフォーラムでは自分の投稿を削除できません このフォーラムでは投票に参加できません
|