MFlenses - デジタル時代の新しさ
MFLenses 2026

マニュアルフォーカスレンズフォーラム

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。
スポットライト

フォーラムトップページのおすすめパートナー掲載。

Fixing condensation between lens elements
前のトピックへ :: 次のトピックへ  


Reply

I am not sure if this is a recommended procedure but it seems to have worked.

I have bought several lenses from cold winter Russia and the Ukraine and they have been shifted from cold/humid to the quite hot/humid of late summer Australia in a particularly wet year.

No apparent problem until I decided to give an Industar-22 a light cleanup. All of a sudden the inside surface of the front element has gone all dewy with condensation.

As it seemed fine beforehand this must have been a weather shock due to change in climate. The front lens was easy enough to remove but getting the elements apart seemed tempting fate.

Not a case of haze as the 'wet spot' waxed and waned and moved about a bit. If I turned the lens upside down it seemed a little better, but if I used hand-heat it quickly filled the entire lens area. It was not going to easily go away by itself.

Not sure what to do, but I felt that if the condensation could get in then it could get out again, despite the seemingly sealed nature of the couplet.

I had a fairly large sachet of silicon gel but no doubt in our humid weather it might be past it's best. So I reconstituted it and as soon as it was hand-holdable I put it and the sealed lens element in a plastic ziplock bag. At first the bag sweated inside but I figures that this was the heat and the moisture already in the air in the bag. I wanted to introduce a bit of heat so that the moisture in the lens element might get sucked out. Left it overnight in the bag and then noticed the wet spot had greatly diminished. Put the bag outside in the sun for about 20 minutes and then the wet spot was gone and as far as I can see through the plastic the lens is clear again. 20 minutes in even an overcast Australian day made the lens element too hot to hold.

Not willing to take it out straight away I am leaving it in bag with the silicone gel to hopefully mop up any remaining moisture content.

I am probably not the first with this idea, but first or not is seems to be working.

Tom


Reply

Welcome caerwall!

Thank you for sharing your experience! Very Happy