| 前のトピックへ :: 次のトピックへ |
| 作成者 |
メッセージ |
pirius
 登録日: 2009年5月28日 投稿: 133 所在地: SoFla
|
 投稿日時: 月 12月 13, 2010 7:33 pm 件名: Disassembling Meyer-Optik Primoplan 58/1.9 |
|
 投稿日時: 月 12月 13, 2010 7:33 pm 件名: Disassembling Meyer-Optik Primoplan 58/1.9 |
|
|
pirius wrote:
I am trying to clean the internal glass on a newly acquired Primoplan 58/1.9 and I am having problems with disassembling the front part of it. It seems pretty straightforward at first but I can't figure out how to remove the front nameplate. Any ideas? Thanks... |
|
| トップへ戻る |
|
 |
Attila
 登録日: 2007年2月24日 投稿: 58002
Expire: 2025-11-18
|
 投稿日時: 月 12月 13, 2010 7:44 pm 件名: |
|
 投稿日時: 月 12月 13, 2010 7:44 pm 件名: |
|
|
Attila wrote:
ここをクリックしてeBayで見る
You need this tool or sink stopper (plug) what has exact diameter and made from hard gum. |
|
| トップへ戻る |
|
 |
pirius
 登録日: 2009年5月28日 投稿: 133 所在地: SoFla
|
 投稿日時: 月 12月 13, 2010 9:12 pm 件名: |
|
 投稿日時: 月 12月 13, 2010 9:12 pm 件名: |
|
|
pirius wrote:
Yeah, that's the one thing that I still don't have. However, I look at the nameplate ring (it is actually a large conical part like in many macro lenses) and it looks like that thread on the filter ring above it is narrower and won't let the ring to come off. I guess it's just an optical illusion  |
|
| トップへ戻る |
|
 |
pirius
 登録日: 2009年5月28日 投稿: 133 所在地: SoFla
|
 投稿日時: 火 12月 14, 2010 5:27 am 件名: |
|
 投稿日時: 火 12月 14, 2010 5:27 am 件名: |
|
|
pirius wrote:
Update: I was right... The nameplate could only be removed with the front filter ring as a single item. After the small retaining screw on the inner side of the front ring is removed, the entire front part can be unscrewed, which gives the access to the front optical unit. Unscrew that one and you get straight to the diaphragm. The rear optical assembly can also be easily removed with a lens wrench so the diaphragm becomes accessible from both sides. |
|
| トップへ戻る |
|
 |
Attila
 登録日: 2007年2月24日 投稿: 58002
Expire: 2025-11-18
|
 投稿日時: 火 12月 14, 2010 1:29 pm 件名: |
|
 投稿日時: 火 12月 14, 2010 1:29 pm 件名: |
|
|
Attila wrote:
| pirius 氏の書き込み: |
| Update: I was right... The nameplate could only be removed with the front filter ring as a single item. After the small retaining screw on the inner side of the front ring is removed, the entire front part can be unscrewed, which gives the access to the front optical unit. Unscrew that one and you get straight to the diaphragm. The rear optical assembly can also be easily removed with a lens wrench so the diaphragm becomes accessible from both sides. |
It would be nice if you take photos from each steps and publish it here, I think some people will happy to read it and use it when need it. Many thanks in advance! |
|
| トップへ戻る |
|
 |
pirius
 登録日: 2009年5月28日 投稿: 133 所在地: SoFla
|
 投稿日時: 火 12月 14, 2010 2:20 pm 件名: |
|
 投稿日時: 火 12月 14, 2010 2:20 pm 件名: |
|
|
pirius wrote:
Sorry, I have already assembled it back. But it's easy, there is not much to show. If you look inside the lens from the front you'll see a tiny screw. Loosen it up, then grab the front part of the lens firmly (the filter ring) and unscrew it counter-clockwise. After that it's just a regular disassembly with a spanner wrench.
So the rubber tool was not necessary, but I have ordered it anyway
BTW, I've tried the lens and I think it's awesome! |
|
| トップへ戻る |
|
 |
Attila
 登録日: 2007年2月24日 投稿: 58002
Expire: 2025-11-18
|
 投稿日時: 火 12月 14, 2010 2:41 pm 件名: |
|
 投稿日時: 火 12月 14, 2010 2:41 pm 件名: |
|
|
Attila wrote:
| pirius 氏の書き込み: |
Sorry, I have already assembled it back. But it's easy, there is not much to show. If you look inside the lens from the front you'll see a tiny screw. Loosen it up, then grab the front part of the lens firmly (the filter ring) and unscrew it counter-clockwise. After that it's just a regular disassembly with a spanner wrench.
So the rubber tool was not necessary, but I have ordered it anyway
BTW, I've tried the lens and I think it's awesome! |
No problem, rubber tool is useful. I like this lens too pretty much, congrats for your new tool.
Try to hunting down Helioplan 40mm or 4cm from Meyer it has even better IQ  |
|
| トップへ戻る |
|
 |
valjo
 登録日: 2008年10月10日 投稿: 68 所在地: Bulgaria
|
 投稿日時: 土 4月 19, 2014 5:13 pm 件名: |
|
 投稿日時: 土 4月 19, 2014 5:13 pm 件名: |
|
|
valjo wrote:
| pirius 氏の書き込み: |
| Update: I was right... The nameplate could only be removed with the front filter ring as a single item. After the small retaining screw on the inner side of the front ring is removed, the entire front part can be unscrewed, which gives the access to the front optical unit. Unscrew that one and you get straight to the diaphragm. |
| pirius 氏の書き込み: |
| ... If you look inside the lens from the front you'll see a tiny screw. Loosen it up, then grab the front part of the lens firmly (the filter ring) and unscrew it counter-clockwise. After that it's just a regular disassembly with a spanner wrench. |
I have removed the small retaining screw on the inner side of the front ring but the front part can NOT be unscrewed. I have tried to unscrew it counter-clockwise firmly as i can.
My intention is to clean the diaphragm from excessively oiling.
What to do?
 _________________ Canon D60
3.5/135 Jupiter 37A |
|
| トップへ戻る |
|
 |
|
|
|
このフォーラムでは新しいトピックを投稿できません このフォーラムではトピックに返信できません このフォーラムでは自分の投稿を編集できません このフォーラムでは自分の投稿を削除できません このフォーラムでは投票に参加できません
|