| 前のトピックへ :: 次のトピックへ |
| 作成者 |
メッセージ |
walter g
 登録日: 2010年2月20日 投稿: 2463 所在地: NC, USA
|
 投稿日時: 水 10月 20, 2010 1:47 am 件名: Canon T-50 Repair |
|
 投稿日時: 水 10月 20, 2010 1:47 am 件名: Canon T-50 Repair |
|
|
walter g wrote:
I picked up a T-50 at a local thrift shop for $3. Everything seems to work right, but where you set the ASA.
The lock is in the down position, Which is supposed to be released. It won't pop back up. Also the ASA dial will go in complete circles.
How hard a repair is this, and do I have 1 or 2 things broken. _________________
Main cameras
Panasonic G5,Nikon J1,Pentax Q10,Sony Nex 6
Minolta MC W SI 2.5/28, MD 2.8/28, MC W SG 3.5/28, MC Celtic 3.5/28, MC W HG 2.8/35, MD Celtic 2.8/35, QE 4/35, Rokkor X 2/45, MC Rokkor X PG 1.4/50, MC Rokkor X PG 1.7/50, MD Rokkor X 1.7/50, MD 2/50, MC Rokkor PF 1.7/55, MC Rokkor PF 1.9/55, Auto Tele Rokkor PG 2.8/135, MC Tele Rokkor QD 3.5/135, TC 4/135, MC Celtic 4/200, MC Tele Rokkor PE 4.5/200
MD 28-70 f3.5-4.8, MD Macro 35-70 f3.5, Md 70-210 f4, MD Rokkor X 75-200 f4.5, MD 100-200 f5.6
Nikon Nikkor 4/20, O Auto 2/35, S Auto 1.4/50..... Miranda Auto 2.8/28, Auto 2.8/35, Auto 1.4/50, Auto EC 1.4/50, Auto 1.8/50, Auto EC 1.8/50,Auto 1.9/50, Auto 3.5/135
Various Soligor,Sun,Fujita,Komura,Spitatone, etc. Lenses
|
|
| トップへ戻る |
|
 |
walter g
 登録日: 2010年2月20日 投稿: 2463 所在地: NC, USA
|
 投稿日時: 金 10月 22, 2010 12:25 am 件名: |
|
 投稿日時: 金 10月 22, 2010 12:25 am 件名: |
|
|
walter g wrote:
Anyone have one apart before? I was thinking about pulling the top off.
Even if it's broken, if I could get is set at 400 film. It would still be usable.
It's in pretty nice shape. I hope it's fixable.
 _________________
Main cameras
Panasonic G5,Nikon J1,Pentax Q10,Sony Nex 6
Minolta MC W SI 2.5/28, MD 2.8/28, MC W SG 3.5/28, MC Celtic 3.5/28, MC W HG 2.8/35, MD Celtic 2.8/35, QE 4/35, Rokkor X 2/45, MC Rokkor X PG 1.4/50, MC Rokkor X PG 1.7/50, MD Rokkor X 1.7/50, MD 2/50, MC Rokkor PF 1.7/55, MC Rokkor PF 1.9/55, Auto Tele Rokkor PG 2.8/135, MC Tele Rokkor QD 3.5/135, TC 4/135, MC Celtic 4/200, MC Tele Rokkor PE 4.5/200
MD 28-70 f3.5-4.8, MD Macro 35-70 f3.5, Md 70-210 f4, MD Rokkor X 75-200 f4.5, MD 100-200 f5.6
Nikon Nikkor 4/20, O Auto 2/35, S Auto 1.4/50..... Miranda Auto 2.8/28, Auto 2.8/35, Auto 1.4/50, Auto EC 1.4/50, Auto 1.8/50, Auto EC 1.8/50,Auto 1.9/50, Auto 3.5/135
Various Soligor,Sun,Fujita,Komura,Spitatone, etc. Lenses
|
|
| トップへ戻る |
|
 |
greg
 登録日: 2009年3月21日 投稿: 683
Expire: 2012-12-03
|
 投稿日時: 金 10月 22, 2010 12:41 am 件名: |
|
 投稿日時: 金 10月 22, 2010 12:41 am 件名: |
|
|
greg wrote:
I seem to remember from a long ago schematic when I was thinking of trying to replace the shutter screen that all that is under there is a spring to force the lock back up/ Perhaps it is simply some spilled sugary liquid or similar under there. A drop or two of isopropyl alcohol might loosen it up?
As with all remarks made by me - Do it entirely at your own risk.  |
|
| トップへ戻る |
|
 |
walter g
 登録日: 2010年2月20日 投稿: 2463 所在地: NC, USA
|
 投稿日時: 土 10月 23, 2010 2:48 am 件名: |
|
 投稿日時: 土 10月 23, 2010 2:48 am 件名: |
|
|
walter g wrote:
I took it apart. It has two problems. The ASA ring has a tab broken off the bottom.
The ASA spring/ lock had slipped.
To repair it I will have to use a small washer on the spring screw. For now I will set the speed for 400 speed film. The spring lock will keep it in place, but I won't be able to change film speed until the ASA ring is replaced.
The camera tests out fine, even the seals are good. I will have to do a full test with film of course, but I don't expect any problems.Which is good I hate to spend $3 buying a camera thats not fixable.
Pic 1 is the correct placement of the ASA spring/lock.
Pic 2 is the ASA ring with broken tab.
 _________________
Main cameras
Panasonic G5,Nikon J1,Pentax Q10,Sony Nex 6
Minolta MC W SI 2.5/28, MD 2.8/28, MC W SG 3.5/28, MC Celtic 3.5/28, MC W HG 2.8/35, MD Celtic 2.8/35, QE 4/35, Rokkor X 2/45, MC Rokkor X PG 1.4/50, MC Rokkor X PG 1.7/50, MD Rokkor X 1.7/50, MD 2/50, MC Rokkor PF 1.7/55, MC Rokkor PF 1.9/55, Auto Tele Rokkor PG 2.8/135, MC Tele Rokkor QD 3.5/135, TC 4/135, MC Celtic 4/200, MC Tele Rokkor PE 4.5/200
MD 28-70 f3.5-4.8, MD Macro 35-70 f3.5, Md 70-210 f4, MD Rokkor X 75-200 f4.5, MD 100-200 f5.6
Nikon Nikkor 4/20, O Auto 2/35, S Auto 1.4/50..... Miranda Auto 2.8/28, Auto 2.8/35, Auto 1.4/50, Auto EC 1.4/50, Auto 1.8/50, Auto EC 1.8/50,Auto 1.9/50, Auto 3.5/135
Various Soligor,Sun,Fujita,Komura,Spitatone, etc. Lenses
|
|
| トップへ戻る |
|
 |
walter g
 登録日: 2010年2月20日 投稿: 2463 所在地: NC, USA
|
 投稿日時: 金 10月 29, 2010 2:06 am 件名: |
|
 投稿日時: 金 10月 29, 2010 2:06 am 件名: |
|
|
walter g wrote:
If you need to do this repair it's an easy fix if you can find the part.
If your ASA Ring goes in complete circles the tab is broken.
1) Pull up on winder to open back of camera
2) Put a screwdriver thru fork to hold it, and screw of winder.
3) You will see a flat plastic disc with a notch in it. Push a small screwdriver stright into the notch and disc will come off.
4) Pull up on ASA ring to remove it. It will come off with the washer.
5) Replace part and reverse reassemble.
If your ASA lock dosen't work, you need to do the second part of the repair. With the parts metioned above still removed. Follow these steps.
The front must come off before the top does.
1) Don't close the back.
2) On the side of the camera that opens remove the 2 screws, and the screw in plug. You must do this first, because it helps hold the front piece on.
3) Remove the bottom screw and the 2 side screws.
4) Remove the top screw that's just under the red dot. This is a shorter screw so keep it seperatly. IF YOU USE A LONGER SCREW IN THIS HOLE IT WILL DAMAGE THE PRISM.
5) Now you can carefully remove the front piece.
6) Remove the 2 end scews.
7 ) Remove the 2 screws that are around the finder.
8 ) Remove the 2 screws on the front, that were hidden by the front piece.
9) Now you can carefully pull up on the top, be very careful with the wires.
10) By the pic above you can see the placement off the ASA lock / spring.
11) Mine wouldn't stay in place so I used a #2 washer. I didn't have a local source for a micro washer.
12) Push down on corner of spring and test it, if it works properly. Make sure it's in the proper hole.
13) Reverse reassemble.These steps and the steps above.
14) Your done.
Disclamer
I don't believe I've left anything out. But do this repair at your own risk.
It is very easy to damage your camera so be careful, or leave it to a professional. _________________
Main cameras
Panasonic G5,Nikon J1,Pentax Q10,Sony Nex 6
Minolta MC W SI 2.5/28, MD 2.8/28, MC W SG 3.5/28, MC Celtic 3.5/28, MC W HG 2.8/35, MD Celtic 2.8/35, QE 4/35, Rokkor X 2/45, MC Rokkor X PG 1.4/50, MC Rokkor X PG 1.7/50, MD Rokkor X 1.7/50, MD 2/50, MC Rokkor PF 1.7/55, MC Rokkor PF 1.9/55, Auto Tele Rokkor PG 2.8/135, MC Tele Rokkor QD 3.5/135, TC 4/135, MC Celtic 4/200, MC Tele Rokkor PE 4.5/200
MD 28-70 f3.5-4.8, MD Macro 35-70 f3.5, Md 70-210 f4, MD Rokkor X 75-200 f4.5, MD 100-200 f5.6
Nikon Nikkor 4/20, O Auto 2/35, S Auto 1.4/50..... Miranda Auto 2.8/28, Auto 2.8/35, Auto 1.4/50, Auto EC 1.4/50, Auto 1.8/50, Auto EC 1.8/50,Auto 1.9/50, Auto 3.5/135
Various Soligor,Sun,Fujita,Komura,Spitatone, etc. Lenses
|
|
| トップへ戻る |
|
 |
|
|
|
このフォーラムでは新しいトピックを投稿できません このフォーラムではトピックに返信できません このフォーラムでは自分の投稿を編集できません このフォーラムでは自分の投稿を削除できません このフォーラムでは投票に参加できません
|