| 前のトピックへ :: 次のトピックへ |
| 作成者 |
メッセージ |
montecarlo
 登録日: 2007年4月4日 投稿: 1865 所在地: Romania
|
 投稿日時: 木 7月 03, 2008 10:34 am 件名: About bellows |
|
 投稿日時: 木 7月 03, 2008 10:34 am 件名: About bellows |
|
|
montecarlo wrote:
Hello all,
Inspired by poilu's setup and its results http://forum.mflenses.com/reala-snapshots-t8318,start,15.html#69845 I would like to di the same because I have some 500 old slides and no one in the city it scannig slides. So the cheapest method would be this.
I've got a scanner, but its only for documents and I don't have enough money for a good , performant scanner.
What are the thing I sould look or ask when I buy a bellow ? Can I , using a bellow to "scan" an entire slide even if the camera is an APS-C sensor one (by moving the slide foward and backward) ?
Thank you . _________________ Canonet QL17 III
Zenit E , Helios-44 58mm f:2.0 , Tair-11A 135mm f:2.8, Jupiter-9 85mm f:2.0,
Carl Zeiss Jena Flektogon 35mm f:2.4
Pentax MX, ME Super, Chinon CE4/CM4, Petri MC 28mm f:2, smc Pentax-M 50mm f:1.7, Soligor T 135mm f:2.8
Minolta X500, Tokina 28/2.8, Rokkor 50/1.7, 80-205/4.5
Nikon D90, Nikkor 35/2.0, Nikkor 50/1.8, Sigma 24/2.8, Nikkor 18-105 VR |
|
| トップへ戻る |
|
 |
Orio
登録日: 2007年2月24日 投稿: 29545 所在地: West Emilia
Expire: 2012-12-04
|
 投稿日時: 木 7月 03, 2008 12:15 pm 件名: |
|
 投稿日時: 木 7月 03, 2008 12:15 pm 件名: |
|
|
Orio wrote:
Cosmin,
a couple of years ago, I bought from Ebay a M42 pentax bellows with included an industar-61L and slide copier. Look for this kind of deals. If I remember well I paid less than 40 Euros for the whole thing (bellows+slide copier unit+industar) _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| トップへ戻る |
|
 |
poilu
 登録日: 2007年8月26日 投稿: 10476 所在地: Greece
Expire: 2019-08-29
|
 投稿日時: 木 7月 03, 2008 6:23 pm 件名: |
|
 投稿日時: 木 7月 03, 2008 6:23 pm 件名: |
|
|
poilu wrote:
| Cosmin 氏の書き込み: |
| Can I , using a bellow to "scan" an entire slide even if the camera is an APS-C sensor one (by moving the slide foward and backward) ? |
If you use a APS, the slide have to be more away and the lens more near the cam than for full frame.
Some bellow doesn't allow enough movement, if you look at my setup you will see a wooden stick that I use to move the slide more away.
I cannot advice you which bellow allow the more movement and it is difficult to evaluate it on a photography. _________________ T* |
|
| トップへ戻る |
|
 |
soikka
 登録日: 2008年6月11日 投稿: 534 所在地: Finland
|
 投稿日時: 木 7月 03, 2008 8:28 pm 件名: |
|
 投稿日時: 木 7月 03, 2008 8:28 pm 件名: |
|
|
soikka wrote:
| poilu 氏の書き込み: |
| Cosmin 氏の書き込み: |
| Can I , using a bellow to "scan" an entire slide even if the camera is an APS-C sensor one (by moving the slide foward and backward) ? |
If you use a APS, the slide have to be more away and the lens more near the cam than for full frame.
Some bellow doesn't allow enough movement, if you look at my setup you will see a wooden stick that I use to move the slide more away.
I cannot advice you which bellow allow the more movement and it is difficult to evaluate it on a photography. |
I use different focal length to compensate for the wooden stick. With about 75mm you get the whole frame copied even with APS-C sensor. I use a Pentax K-mount Auto-bellows and its slide copier, it doesn't allow enough movement for ~50mm lens on an APS-C camera, but with M75-150@75mm it's fine. _________________ DSLR: K-5,K20d+Grip, Ist*Ds
Film: MZ-5n, LX, MX+winder, SuperA+winder, ME Super,
M-series: 28/2.8, 35/2, 40/2.8, 135/3.5, 75-150/4, A-series: 50/1.7, Super-Taks: 55/1.8, 105/2.8, S-M-C Taks: 28/3.5, 50/1.4, 85/1.8, Sigma SW2 24/2.8, Tamron SPs: 90/2.5(I), 180/2.5, 500/8, Rikenon XR 35-70/3.5, Cosinon 40/2.5, F-1.7x AF-adapter, Olympus XA |
|
| トップへ戻る |
|
 |
|
|
|
このフォーラムでは新しいトピックを投稿できません このフォーラムではトピックに返信できません このフォーラムでは自分の投稿を編集できません このフォーラムでは自分の投稿を削除できません このフォーラムでは投票に参加できません
|