MFlenses - デジタル時代の新しさ
MFLenses 2026

マニュアルフォーカスレンズフォーラム

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。
スポットライト

フォーラムトップページのおすすめパートナー掲載。

Scanning pictures: HP Scanjet 2400
前のトピックへ :: 次のトピックへ  


Reply

Hi colleagues,

Having went back to film, I need to scan the pictures (to store digitally and to be able to show them to you Wink ).

So I took the dust out of my cheap flatbed scanner and started scanning some of the Konica C35 pictures I took to test the camera.

The default setting for the scanner are to scan pictures at 200 dpi. That seemed to me not too high, so I tried to push the scanner to its limits and set 4800 dpi.

The resulting file was a 1,5 Gb file... Not manageable.

So my question is, which is the appropriate resolution to scan 11x13cm pictures?.

Thanks in advance.
Jes.

200 dpi samples:





(Notice the reddish flame caused by the defective seal.)


Reply

Jesito 氏の書き込み:

So my question is, which is the appropriate resolution to scan 11x13cm pictures?.


For printing a 10x15 cm photograph, a 300 PPI scan or perhaps even a 240 should be enough.


Reply

Orio 氏の書き込み:
Jesito 氏の書き込み:

So my question is, which is the appropriate resolution to scan 11x13cm pictures?.


For printing a 10x15 cm photograph, a 300 PPI scan or perhaps even a 240 should be enough.


Thanks, Orio!
I'll try it...
Best regards,
Jes.


Reply

Of course I am speaking of scanning an original of the same size.

I realized now you perhaps talk about scanning a negative or slide.

In that case, you will need a higher resolution. Usually scanners come with a managing program that lets you set the final output as pixels, inches and centimetres, so you should be able to set it to centimetres and set the precise value you need.