MFlenses - デジタル時代の新しさ
MFLenses 2026

マニュアルフォーカスレンズフォーラム

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。
スポットライト

フォーラムトップページのおすすめパートナー掲載。

Rim Dent removal tips?
前のトピックへ :: 次のトピックへ  


Reply

I just recently acquired the tool for removing dents on lens rims and have yet to sort one minor problem which is not being able to screw off the name plate. I've managed to get the name plate to about 2 thread turns from being off but not quite good enough. If anyone's used these tools as fsold by a vendor in India and figured ow to sort that last bit of thread I'd appreciate any tips.
After getting the lens rim looking reasonably round I've tried using the tool a bit like a thread cutting die but to date the last bits aren't playing ball.


Reply

try to chase those threads from the other direction: screw in a filter


Reply

Also a tiny drop of some lubricant into the threads might help. It must be very thin (like CRC 5-56) to seep into the thread also under the name ring.

Sometimes straigthening the rim can damage the thread surface, although they might look OK the surface might be rougher than on the other part of the threads This can cause just enough friction to stop the name ring from turning and a bit of lubrication might just do the trick.


Reply

I had one last go using the dent remover as a thread chaser but opened it up a tad on the tight spots which sorted the lens I was working on.
Now I have the fun of sorting a 58mm Biotar which is not just dented inwards but has metal pushed in towards the lens and compressing the existing thread. I suppose with enough practice, and me not being shy about buying dented lens that should come.


Reply

Could you post a photo of what you are doing and the tool in question?Thanks


Reply

Here's the tool, used for fixing bent filter rims on lenses. ここをクリックしてeBayで見る
Bugger the link doesn't want to play so pics along with the patients next day or 2.


Reply

I appreciate the effort... Smile I hate it when the ebay link does that Confused


Reply

I fixed the link - it should work fine now.

I have one of those. It works ok but not for the faint hearted as it makes all sorts of crunching noises when straightening the rims.


最終編集: martinsmith99、木 12月 31, 2009 10:32 am、計 1 回


Reply

Thanks for that Martin.


Reply

Hello there,
I got my version of this tool from Micro-Tools, and it came with a helpful leaflet about how best to use it. The suggested method is to position the tool so that the screw handle is diametrically opposite the area that needs to have the dent removed, turn the screw handle to create a light expanding force, then lightly tap the end of the handle with a small hammer. This will reduce the compression in the screw (tension in the metal being straightened), so re-tighten lightly and repeat until the dent is cleared.

regards

Angus


Reply

Yep, these need a stretch-and-tap action. In any case, I rarely use mine on filter rings, as the overstretching involved poses quite a risk to the glass, while filter rings often already have to be rightened in preparation for disassembly (as the original poster discovered).

Wood templates and a wood chisel are more gentle and effective to dent out filter rings on a assembled lens. Filter ring vices tend to break more front lenses, and are better used only after everything has been taken apart.


Reply

Photomac, I don't suppose you could scan that leaflet at all?


Reply

Hello there,
Scanning it would be no problem, I need to find it first!

I know you are itching to get on with things, but let me get New Year out of the way first, and I'll get it to you as soon as I can. It's past your New Year now, isn't it, so Happy New Year to you, and all forum members.

Regards

Angus


Reply

Yep the year is well on the way here, enjoy brining in 2010.


Reply

I've previously seen the eBay listing for this tool and it looks, well, sort of OK - but don't forget it presses just as hard on both sides...

Protect the front element before you do anything else!

Better to pad the faces of the tool with strips of plastic for the first expansion of a badly-dented ring until it's almost there - and for the final press I would use cut pieces from an old filter instead of the pads, using its threads to "fill up" the threads of the lens. A tiny smear of lubricant helps. Pressing a flat, even though curved, metal surface against fine threads can easily damage them.

I used to use a pair of water pump pliers with the jaws ground to a curve, cut pieces of filter and curved hardwood packing pieces of various sizes made as required to fit the outside of the lens' filter ring. Blu-tack and thick cardboard to protect the glass if you don't have anything better.

To remove a jammed-on filter that is NOT cross-threaded I haven't found anything better than Boa Constrictor tools - never failed - sometimes I've had to use two of them together, one on the lens & one on the filter. In opposite directions of course.The only part of the lens safe to grip is the part the filter screws into, anywhere else and your lens may be damaged beyond repair.

The Boa Constrictors will remove cross-threaded filters and since there is already damage to the threads you might want to take the easy way and just unscrew it.For an expensive lens I would usually cut the filter out with a Dremel and a tiny blade and a LOT of care. Too many variables to walk you through the process but glass first, two cuts 6-7mm. apart, twist with snipe-nose pliers.

If you don't understand then you should use the Boa.


Reply

Hello there,
Still can't find the leaflet for the rim-straightening tool! I will keep looking but it doesn't say any more than I described, and doesn't have diagrams or anything like that, so you are not really missing anything.

Regards

Angus