MFlenses - デジタル時代の新しさ
MFLenses 2026

マニュアルフォーカスレンズフォーラム

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。
スポットライト

フォーラムトップページのおすすめパートナー掲載。

C/Y adapters, important difference
前のトピックへ :: 次のトピックへ  


Reply

Not only there are some adapters that allow lenses like Planar 1.4/50 to stop down while other adapters don't;

Now I have also found, that there are some Contax lenses - and I can give two examples: the Mutar I teleconverter and the S-Planar 60mm f/2.8 - that don't lock at all on the newer type of adapter, rotating freely, while they do lock well on older adapters.

I'd like to know if any of you has had the same issue with any Contax or Yashica lens.


Reply

please post pics of your adapters.


Reply

ok, I will


Reply

Orio 氏の書き込み:
Now I have also found, that there are some Contax lenses - and I can give two examples: the Mutar I teleconverter and the S-Planar 60mm f/2.8 - that don't lock at all on the newer type of adapter, rotating freely, while they do lock well on older adapters.


I had a similar issue with one of the adapters. The problem was solved by loosening the two screws that hold the lock spring on the adapter, and moving the spring itself a bit lower. It's really easier to do than to explain; the problem was that the spring that's supposed to lock the lens was positioned slightly too high due to bad assembly tolerances, so it just went above the flanges of the lens.