| 前のトピックへ :: 次のトピックへ |
| 作成者 |
メッセージ |
Xpres
 登録日: 2007年12月11日 投稿: 964 所在地: UK
Expire: 2014-10-28
|
 投稿日時: 日 12月 14, 2008 5:39 pm 件名: Zenit 3m top removal |
|
 投稿日時: 日 12月 14, 2008 5:39 pm 件名: Zenit 3m top removal |
|
|
Xpres wrote:
I have a 3m that, inspired by others here, I intend to 'upgrade'. It needs a new mirror, focus screen and most likely a prism, all of which I have ready. the mirror was easy, but how do I get the top off? Is it the same as a Zenit E? If it is I'm making a meal of it as I can't budge the bit around the cable release/shutter. It goes around, moving the mirror up and down, but doesn't undo. I'm trying clockwise - is that right?
Any tips would be gratefully received. _________________ Film... and sometimes SD14, 5D2 and some other suff! |
|
| トップへ戻る |
|
 |
themoleman342
 登録日: 2007年10月21日 投稿: 2190 所在地: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 投稿日時: 日 12月 14, 2008 6:38 pm 件名: |
|
 投稿日時: 日 12月 14, 2008 6:38 pm 件名: |
|
|
themoleman342 wrote:
hmmm, I'm not familiar with the 3m. You are probably aware of this site: http://tomtiger.com/ under zenit repair project. It might be a similar enough procedure to get a better idea of what your doing...Hope that helps some
~Marc |
|
| トップへ戻る |
|
 |
Xpres
 登録日: 2007年12月11日 投稿: 964 所在地: UK
Expire: 2014-10-28
|
 投稿日時: 日 12月 14, 2008 7:18 pm 件名: |
|
 投稿日時: 日 12月 14, 2008 7:18 pm 件名: |
|
|
Xpres wrote:
thanks Marc, yes I did see that one. I'm just not sure how similar the E and 3M are? _________________ Film... and sometimes SD14, 5D2 and some other suff! |
|
| トップへ戻る |
|
 |
peterqd
 登録日: 2007年2月28日 投稿: 7449 所在地: near High Wycombe, UK
Expire: 2014-01-04
|
 投稿日時: 日 12月 14, 2008 8:24 pm 件名: |
|
 投稿日時: 日 12月 14, 2008 8:24 pm 件名: |
|
|
peterqd wrote:
I know that Jon Goodman, the chap who sells the light seal kits, is an expert on repairing Zenits, including 3Ms. Maybe he could help if you don't get far here.
jon_goodman@yahoo.com _________________ Peter - Moderator |
|
| トップへ戻る |
|
 |
Xpres
 登録日: 2007年12月11日 投稿: 964 所在地: UK
Expire: 2014-10-28
|
 投稿日時: 月 12月 15, 2008 10:39 am 件名: |
|
 投稿日時: 月 12月 15, 2008 10:39 am 件名: |
|
|
Xpres wrote:
Thanks Peter. As it happens I took a chance and forced it a bit - and it worked! It does move clockwise. It seems all zenits are indeed equal under the skin.
I'm putting in a screen and prism from 12xp which should brighten things up. And some fancy leather too. Will show when done. Thanks all. _________________ Film... and sometimes SD14, 5D2 and some other suff! |
|
| トップへ戻る |
|
 |
Xpres
 登録日: 2007年12月11日 投稿: 964 所在地: UK
Expire: 2014-10-28
|
 投稿日時: 火 12月 16, 2008 11:15 pm 件名: |
|
 投稿日時: 火 12月 16, 2008 11:15 pm 件名: |
|
|
Xpres wrote:
For the benefit of anyone who comes across this thread in their search for info on opening up a 3M I will add a photo and a tip or two.
When you come to take off the wind on lever it's not quite the same as a Zenit 'E' type. Don't undo the three screws, just push the end of the spring so that it disappears and then lift off the remaining two parts of the lever together. You should also release the shutter before you put the lid back on or you may find everything stuck solid. And add a touch of grease to the brassed area you see in the photo.
I've now put the new mirror, prism and screen in and, wow, what a difference. Mind you it was very murky before. However infinity is now out so Ill need to remove a couple of shims. Another difference between this and later Zenits is that there is no mirror crate adjustment screw!
 _________________ Film... and sometimes SD14, 5D2 and some other suff! |
|
| トップへ戻る |
|
 |
themoleman342
 登録日: 2007年10月21日 投稿: 2190 所在地: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 投稿日時: 水 12月 17, 2008 1:48 am 件名: |
|
 投稿日時: 水 12月 17, 2008 1:48 am 件名: |
|
|
themoleman342 wrote:
Beautiful piece! To bad about the lack of adjustment screw...its such an easy procedure for the E-series. Does the ground-glass have a split-screen or were they just the microprism? |
|
| トップへ戻る |
|
 |
Jesito
 登録日: 2007年8月24日 投稿: 5745 所在地: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 投稿日時: 水 12月 17, 2008 3:59 am 件名: |
|
 投稿日時: 水 12月 17, 2008 3:59 am 件名: |
|
|
Jesito wrote:
Nice camera and nice pictures, congrats!.
Which lens did you use for them?.
It looks like you used flash with some kind of diffuser or reflector, didn't you?.
(Just asking to improve my own ones, I find yours much better...)
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| トップへ戻る |
|
 |
Xpres
 登録日: 2007年12月11日 投稿: 964 所在地: UK
Expire: 2014-10-28
|
 投稿日時: 水 12月 17, 2008 10:22 am 件名: |
|
 投稿日時: 水 12月 17, 2008 10:22 am 件名: |
|
|
Xpres wrote:
Thanks guys.
the new screen from the 12xp is a micro prism and collar, no split which is how I prefer it. My OMs and contax have the same type so just habit really.
The old one in the 3m was more like a lens in itself. Like a condenser with one side ground.
The pictures are from my canon g3 with flash bounced off the ceiling. I only use it for ebay shots and this sort of thing now. But it's a very capable camera and very quick. Too much trouble to set up lights or reflectors and stuff when the ceiling does such a reasonable job. _________________ Film... and sometimes SD14, 5D2 and some other suff! |
|
| トップへ戻る |
|
 |
themoleman342
 登録日: 2007年10月21日 投稿: 2190 所在地: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 投稿日時: 水 12月 17, 2008 3:43 pm 件名: |
|
 投稿日時: 水 12月 17, 2008 3:43 pm 件名: |
|
|
themoleman342 wrote:
Yeah I'm not a big split screener either. I have it with the zenit 122 and it seems to only be good for really bright situations.
I always thought that old ground glass was funny. It really is just a hunk of frosted glass. |
|
| トップへ戻る |
|
 |
Xpres
 登録日: 2007年12月11日 投稿: 964 所在地: UK
Expire: 2014-10-28
|
 投稿日時: 土 6月 06, 2009 10:39 pm 件名: |
|
 投稿日時: 土 6月 06, 2009 10:39 pm 件名: |
|
|
Xpres wrote:
Just an update.
I finally got around to processing a test roll from the 3m which had been sitting about since Christmas.
The camera worked very smoothly after it's refit with a good clear view from the new prism and screen and a much quieter mirror after new dampers. However there were a few light leaks in the back which I need to attend to and... frustratingly... it front focuses a bit! I need to put a shim in but it'll be a tight fit. The clips that held the old screen in place leave no room for shims when the new screen is in place, as it's thicker in the corners than the old 'lens'. I'll have to figure out an alternative I think.
Apart from that crucial issue it's great!
A couple of shots - played with a bit as they're all OOF... I shot all wide open with the Helios 44.
 _________________ Film... and sometimes SD14, 5D2 and some other suff! |
|
| トップへ戻る |
|
 |
Jesito
 登録日: 2007年8月24日 投稿: 5745 所在地: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 投稿日時: 土 6月 06, 2009 11:30 pm 件名: |
|
 投稿日時: 土 6月 06, 2009 11:30 pm 件名: |
|
|
Jesito wrote:
Great shots!, congrats.
You did a good job with the camera!
Regards,
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| トップへ戻る |
|
 |
Xpres
 登録日: 2007年12月11日 投稿: 964 所在地: UK
Expire: 2014-10-28
|
 投稿日時: 日 6月 07, 2009 11:51 am 件名: |
|
 投稿日時: 日 6月 07, 2009 11:51 am 件名: |
|
|
Xpres wrote:
Thanks Jes  _________________ Film... and sometimes SD14, 5D2 and some other suff! |
|
| トップへ戻る |
|
 |
ManualFocus-G
 登録日: 2008年12月29日 投稿: 6675 所在地: United Kingdom
Expire: 2014-11-24
|
 投稿日時: 火 6月 09, 2009 9:27 pm 件名: |
|
 投稿日時: 火 6月 09, 2009 9:27 pm 件名: |
|
|
ManualFocus-G wrote:
Love the last two! That horse shot is superb  _________________ Graham
Shooter of choice: Nikon Z6
Lenses:
Vivitar presets
Soligor autos
Pentacon presets
Prakticar PBs
Some other weird stuff!
|
|
| トップへ戻る |
|
 |
|
|