MFlenses - デジタル時代の新しさ
MFLenses 2026

マニュアルフォーカスレンズフォーラム

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。

修理ノート、実際のテスト写真、画像豊富な詳細アーカイブスレッドから、ヴィンテージレンズの世界を探検してください。
スポットライト

フォーラムトップページのおすすめパートナー掲載。

Adaptall-2 adaptors on 500mm Mirror
前のトピックへ :: 次のトピックへ  


Reply

Hi.

I've got a 500mm Tammy SP and PKA adaptor on loan from the Photographic society in my Uni. The adaptor lock into a 90mm (on loan as well) but it doesn't lock into the mirror lens. The mirror lens came with a Nikon adaptor and that too doesn't lock either...
Is it supposed to be like that or is it faulty?

Its a nuisance when you're focussing...


Reply

It'is faulty of mirror lens, adapter must lock on every lenses.


Reply

I'll take a pic to show you guys and see if we can find the fault.

I searched online and couldn't find anything different from what I could see in the lens.


Reply

Ok, here they are:




Seems normal to me...
Any ideas?


Reply

Take an an other adaptall lens and compare them by millimeters. From picture we can't do same. I am sure you will find difference.


Reply

The little "pegs" on the outside of the adapter are seated into the "notches" on the lens? Rotating the aperture ring helps this, but it sounds like you already know what you're doing Confused Hmmm...


Reply

The lens has no notchs, its fixed F8, not like the other ones. Tha adaptor works on the 90mm and locks. But not on this one. Maybe it is supposed to work this way... If this is true than its bad design.
I'm getting an Adaptall-2 PK adaptor for myself soon (from a fellow here in mflenses), I'll see if that is any different.


Reply

Take a look at the other side of the lens. Does it have the little silver lever ?



Reply

edumad 氏の書き込み:
The lens has no notchs, its fixed F8, not like the other ones. Tha adaptor works on the 90mm and locks. But not on this one. Maybe it is supposed to work this way... If this is true than its bad design.
I'm getting an Adaptall-2 PK adaptor for myself soon (from a fellow here in mflenses), I'll see if that is any different.

Whoops...forgot about that...late night post Embarassed

Like Jieffe posted...that lever must not be locking for some reason. Try putting the adapter on normally, then "slamming it home" by giving it a quick twist to lock it. I had to do this (repeatedly) with a PKA that didn't lock in the AE position.

When you get the PKA, take the adapter with the contacts at the 6 o'clock position, and look to the left of them. There is a small screw with glue on it. Grab a pocket knife and scrape that glue off. Without doing this, the adapter might not register the aperture on the body Smile


Reply

Jieffe, that is it. That lever is not there, there is the small gap but no lever.
Pitty. I'll warn the guys at the society.

I like the idea of the adaptall, but using it isn't as easy as I thought it would be. I'm allways afraid I'll brake something...

Can someone explain how to put it on and take it of properly.
It seems to me that soemtime I'm using a lot of force to get it out...
Maybe I'm being over zealous...