| 前のトピックへ :: 次のトピックへ |
| 作成者 |
メッセージ |
piticu
 登録日: 2008年8月4日 投稿: 591 所在地: Romania
|
 投稿日時: 土 8月 30, 2008 2:01 pm 件名: Servicing a Volna-3 |
|
 投稿日時: 土 8月 30, 2008 2:01 pm 件名: Servicing a Volna-3 |
|
|
piticu wrote:
I've had a full of dust and fungus Volna-3 and I wanted to remove the aperture (the lens is part of a custom home made tilt and shift). I dismantled it quite easily, cleaned the lenses with a ammonia based solution, cleaned and relubricate the helix and put it back togheter. It took around 3 hours all together.
Volna-3 at f2.8
Helios 44M at f2
Nikkor 50mm at f1.4
 _________________ www.atelierelealbe.eu
最終編集: piticu、土 8月 30, 2008 6:29 pm、計 1 回 |
|
| トップへ戻る |
|
 |
maddog10
 登録日: 2008年4月8日 投稿: 1072 所在地: Maryland, USA
Expire: 2015-02-12
|
 投稿日時: 土 8月 30, 2008 2:10 pm 件名: |
|
 投稿日時: 土 8月 30, 2008 2:10 pm 件名: |
|
|
maddog10 wrote:
I am pretty sure I could take it apart, it's the rebuilding I would have trouble with.
Did you take photos of the entire process, I would like to see them. _________________ Michael Hill |
|
| トップへ戻る |
|
 |
piticu
 登録日: 2008年8月4日 投稿: 591 所在地: Romania
|
 投稿日時: 土 8月 30, 2008 2:23 pm 件名: |
|
 投稿日時: 土 8月 30, 2008 2:23 pm 件名: |
|
|
piticu wrote:
| maddog10 氏の書き込み: |
| I am pretty sure I could take it apart, it's the rebuilding I would have trouble with. |
Tell me about it… I was like „OK, now what?“
| maddog10 氏の書き込み: |
| Did you take photos of the entire process, I would like to see them. |
Noooo I was too focused on the job to think about taking pictures. But the next time I will, that's a promise. _________________ www.atelierelealbe.eu |
|
| トップへ戻る |
|
 |
LucisPictor
 登録日: 2007年2月26日 投稿: 17633 所在地: Oberhessen, Germany / Maidstone ('95-'96)
Expire: 2013-12-03
|
 投稿日時: 土 8月 30, 2008 4:07 pm 件名: Re: Servicing a Volna-3 |
|
 投稿日時: 土 8月 30, 2008 4:07 pm 件名: Re: Servicing a Volna-3 |
|
|
LucisPictor wrote:
| piticu 氏の書き込み: |
I've had a full of dust and fungus Volna-3 and I wanted to remove the aperture (the lens is part of a custom home made tilt and shift). I dismantled it quite easily, cleaned the lenses with a ammonia based solution, cleaned and relubricate the helix and put it back togheter. It took around 3 hours all together.
|
And you got a working lens out of this? Well done! _________________ Personal forum activity on pause every now and again (due to job obligations)!
Carsten, former Moderator
Things ON SALE
Carsten = "KAPCTEH" = "Karusutenu" | T-shirt?.........................My photos from Emilia: http://www.schouler.net/emilia/emilia2011.html
My gear: http://retrocameracs.wordpress.com/ausrustung/
Old list: http://forum.mflenses.com/viewtopic.php?t=65 (Not up-to-date, sorry!) | http://www.lucispictor.de | http://www.alensaweek.wordpress.com |
http://www.retrocamera.de |
|
| トップへ戻る |
|
 |
sichko
 登録日: 2008年6月20日 投稿: 2475 所在地: South West UK
|
 投稿日時: 土 8月 30, 2008 7:26 pm 件名: |
|
 投稿日時: 土 8月 30, 2008 7:26 pm 件名: |
|
|
sichko wrote:
You have my admiration piticu. I hope to get a Volna 3 in the near future. I expect that I shall have to clean and regrease the helicoids. But I hope that I don't have to go as far as you.
I note your point about not taking photographs. When I take a lens apart for the first time I like to get a complete mental picture of the construction. Although I take copious written notes, and make sketches, photographs are a distraction. _________________ John |
|
| トップへ戻る |
|
 |
Jesito
 登録日: 2007年8月24日 投稿: 5745 所在地: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 投稿日時: 土 8月 30, 2008 7:35 pm 件名: |
|
 投稿日時: 土 8月 30, 2008 7:35 pm 件名: |
|
|
Jesito wrote:
Congrats, Piticu!!
Nice work, I'd love to see a step by step tutorial on it...
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| トップへ戻る |
|
 |
piticu
 登録日: 2008年8月4日 投稿: 591 所在地: Romania
|
 投稿日時: 土 8月 30, 2008 7:55 pm 件名: |
|
 投稿日時: 土 8月 30, 2008 7:55 pm 件名: |
|
|
piticu wrote:
I'd love that too
All I did was to unscrew every tiny screw, starting from bottom up. I stuck a little bit on top lens because the cover ring has no holes in it. And then I remembered i saw some rubber tools somewhere and so I used a piece of an old mouse pad who's under side is very sticky.
For my first lens dismantle i think i managed it well. _________________ www.atelierelealbe.eu |
|
| トップへ戻る |
|
 |
thehive1
登録日: 2008年10月19日 投稿: 8
|
 投稿日時: 日 10月 19, 2008 6:06 am 件名: congrats and help |
|
 投稿日時: 日 10月 19, 2008 6:06 am 件名: congrats and help |
|
|
thehive1 wrote:
Hi! This is Paris, from Mexico.
Congratulations for your success!
Today i got a Volna-3 lens and i want to clean it. I'm making a tilt-shift lens too.
It would be great if you could provide the dismantelation process. |
|
| トップへ戻る |
|
 |
piticu
 登録日: 2008年8月4日 投稿: 591 所在地: Romania
|
 投稿日時: 日 10月 19, 2008 7:34 am 件名: |
|
 投稿日時: 日 10月 19, 2008 7:34 am 件名: |
|
|
piticu wrote:
Ola amigo
Unfortunately i didn't record the steps but it's not big deal: keep removing screws and rings until everything is on your table
Good luck and keep up inform about the process, ok? _________________ www.atelierelealbe.eu |
|
| トップへ戻る |
|
 |
thehive1
登録日: 2008年10月19日 投稿: 8
|
 投稿日時: 日 10月 19, 2008 7:26 pm 件名: |
|
 投稿日時: 日 10月 19, 2008 7:26 pm 件名: |
|
|
thehive1 wrote:
Thanks for your quick reply!
I'll try it, and i'll take pictures of the disassembly process, so i could go back on my steps. If I have some trouble, I'll ask for your help.
Thanks again. |
|
| トップへ戻る |
|
 |
Throndor
 登録日: 2008年9月15日 投稿: 157 所在地: Ankara / TURKEY
|
 投稿日時: 日 10月 19, 2008 9:50 pm 件名: |
|
 投稿日時: 日 10月 19, 2008 9:50 pm 件名: |
|
|
Throndor wrote:
Is the Volna-3 known for its appropriateness to turn into a tilt-shift or is it just a coincidence that both you guys have used/will use it for that matter.. _________________ Omer
Pentax K100D super
Pentax DA 18-55 AL
Pentax SMC-FA 50 f/1.4
Aus Jena Pancolar 50/1.8 (Zebra)
Carl Zeiss Jena Sonnar 135/3.5
Varexon 35/2.8
Helios 44-2 58/2
|
|
| トップへ戻る |
|
 |
piticu
 登録日: 2008年8月4日 投稿: 591 所在地: Romania
|
 投稿日時: 日 10月 19, 2008 10:01 pm 件名: |
|
 投稿日時: 日 10月 19, 2008 10:01 pm 件名: |
|
|
piticu wrote:
Me, I was just looking for any medium format lens and this one was that first that i got. For free, from a friend—it wasn't quite fungus and scratch free though  _________________ www.atelierelealbe.eu |
|
| トップへ戻る |
|
 |
thehive1
登録日: 2008年10月19日 投稿: 8
|
 投稿日時: 日 10月 19, 2008 11:15 pm 件名: |
|
 投稿日時: 日 10月 19, 2008 11:15 pm 件名: |
|
|
thehive1 wrote:
I was just looking for any medium format lens, too.
There's a street on Mexico City's downtown where there are a lot of photography stores.
I was lucky. I found it in a little store of used equipment. I bought it for more or less $18 dollars. |
|
| トップへ戻る |
|
 |
thehive1
登録日: 2008年10月19日 投稿: 8
|
 投稿日時: 日 10月 19, 2008 11:39 pm 件名: |
|
 投稿日時: 日 10月 19, 2008 11:39 pm 件名: |
|
|
thehive1 wrote:
Piticu:
I tried disassembling the lens. I didn't fully disassemble it, now i got a problem. Hope you could tell me: which is the right order or the right way to assemble the following parts?
Thanks! |
|
| トップへ戻る |
|
 |
piticu
 登録日: 2008年8月4日 投稿: 591 所在地: Romania
|
 投稿日時: 月 10月 20, 2008 8:14 am 件名: |
|
 投稿日時: 月 10月 20, 2008 8:14 am 件名: |
|
|
piticu wrote:
I don't know if it's a right order, sometimes there is only one way to assemble the lens, sometimes you can do it in many ways: just be creative
About your volna: i'd start cu no2 on no1, then no3 and finally the barrel. Watch for the two yellow "sticks" of no1 - they have to go precisely on the two tracks of no4.
I don't remember exactly how i did put it back - i was very excited and because of that i worked on "auto mode". But if you don't find a solution i'll open mine again, maybe i'll take some pics this time  _________________ www.atelierelealbe.eu |
|
| トップへ戻る |
|
 |
thehive1
登録日: 2008年10月19日 投稿: 8
|
 投稿日時: 日 10月 26, 2008 5:32 pm 件名: |
|
 投稿日時: 日 10月 26, 2008 5:32 pm 件名: |
|
|
thehive1 wrote:
i haven't had time for trying to assemble my lens.
hope i had time later.
cheers from Mexico! |
|
| トップへ戻る |
|
 |
thehive1
登録日: 2008年10月19日 投稿: 8
|
 投稿日時: 日 11月 02, 2008 11:33 pm 件名: |
|
 投稿日時: 日 11月 02, 2008 11:33 pm 件名: |
|
|
thehive1 wrote:
Hi Piticu!!!
It seems that i finally could assemble the lens. There are only 3 screws to place.
I just have to find the rubber plunger to build my tilt shift.
A question: do you have another example of photographs taken with yout tilt shif?
Thanks!
 |
|
| トップへ戻る |
|
 |
piticu
 登録日: 2008年8月4日 投稿: 591 所在地: Romania
|
 投稿日時: 月 11月 03, 2008 12:37 am 件名: |
|
 投稿日時: 月 11月 03, 2008 12:37 am 件名: |
|
|
piticu wrote:
ya, actually i just „improved“ the „design“ couple of days ago. i'll try to take some decent samples tomorrow and post them here but no promise. in the mean time you may want to check some old shots http://cezar.popescoo.net/main.php?g2_itemId=1898 _________________ www.atelierelealbe.eu |
|
| トップへ戻る |
|
 |
thehive1
登録日: 2008年10月19日 投稿: 8
|
 投稿日時: 火 11月 11, 2008 4:14 am 件名: |
|
 投稿日時: 火 11月 11, 2008 4:14 am 件名: |
|
|
thehive1 wrote:
i tried to assemble the lens... but, i have some trouble... i can't make it work properly...
the rings don't do what they are supposed to do...
here's a little video of it
http://www.youtube.com/watch?v=iTSCqhuCYrg
your help will be appreciated
thanks!
cheers from Mexico |
|
| トップへ戻る |
|
 |
thehive1
登録日: 2008年10月19日 投稿: 8
|
 投稿日時: 月 11月 17, 2008 5:24 pm 件名: question |
|
 投稿日時: 月 11月 17, 2008 5:24 pm 件名: question |
|
|
thehive1 wrote:
Hi Piticu!
Just a question: is this piece alright?
thanks! |
|
| トップへ戻る |
|
 |
piticu
 登録日: 2008年8月4日 投稿: 591 所在地: Romania
|
 投稿日時: 月 11月 17, 2008 8:41 pm 件名: |
|
 投稿日時: 月 11月 17, 2008 8:41 pm 件名: |
|
|
piticu wrote:
i don't remeber ANY bend piece inside that lens. that metal i guess should go inside the tracks you can see on the sides of your pic _________________ www.atelierelealbe.eu |
|
| トップへ戻る |
|
 |
|
|