| 前のトピックへ :: 次のトピックへ |
| 作成者 |
メッセージ |
nemesis101
 登録日: 2008年3月25日 投稿: 2050 所在地: Oregon USA
Expire: 2015-01-22
|
 投稿日時: 日 8月 08, 2010 12:05 am 件名: Yashica ML 50mm f1.4 |
|
 投稿日時: 日 8月 08, 2010 12:05 am 件名: Yashica ML 50mm f1.4 |
|
|
nemesis101 wrote:
Just got one of these from Goodwill.. cost me a small fortune (well, $4.95 which I guess is a VERY small fortune) it has VERY fine tracery of what look like fungal filaments on the extreme outer rim of the lens (behind front element?) which are only visible if one peers very hard and the light shines on the front element from a particular direction. Looking THROUGH the lens it's invisible.. and a tiny spot (1mm) deeper inside.
I would love to clean this as my first impressions are
a) That it is a wonderful lens to use on my Oly E-1 as images 'snap' into focus, and
b) It seems able to give my Y/C Planar 50mm F1.4 a run for its money. Indeed looking at the construction, casing and lens element diameters it is hard (unless looking at the front name ring) to tell them apart!
Anyone got any good info in dismantling one of these, and / or using one?
Thanks
Doug. _________________ Lenses and cameras:
Amateurs worry about equipment
Pros worry about money,
Masters worry about light. |
|
| トップへ戻る |
|
 |
nemesis101
 登録日: 2008年3月25日 投稿: 2050 所在地: Oregon USA
Expire: 2015-01-22
|
 投稿日時: 月 8月 09, 2010 7:39 pm 件名: |
|
 投稿日時: 月 8月 09, 2010 7:39 pm 件名: |
|
|
nemesis101 wrote:
Still awaiting advice!
Anyone out there with experience of this lens in use, or dismantling one?
PLEASE?
Doug _________________ Lenses and cameras:
Amateurs worry about equipment
Pros worry about money,
Masters worry about light. |
|
| トップへ戻る |
|
 |
Attila
 登録日: 2007年2月24日 投稿: 58002
Expire: 2025-11-18
|
 投稿日時: 木 8月 12, 2010 12:19 pm 件名: |
|
 投稿日時: 木 8月 12, 2010 12:19 pm 件名: |
|
|
Attila wrote:
DON'T CLEAN use it and enjoy! Store right, low humidity, allow to light throw (uv filter on front) and fungus will not grow ever. Cleaning need only if fungus covered all over lens surface. All cleaning is a risk on lens safety especially if you don't have practice and use less if fungus spot is small like this. |
|
| トップへ戻る |
|
 |
nemesis101
 登録日: 2008年3月25日 投稿: 2050 所在地: Oregon USA
Expire: 2015-01-22
|
 投稿日時: 木 8月 12, 2010 5:20 pm 件名: |
|
 投稿日時: 木 8月 12, 2010 5:20 pm 件名: |
|
|
nemesis101 wrote:
Thank you Obi Wan.. though I think you may have intended NO UV filter in front?
I shall take your (as always) very sensible advice. I guess the desire for perfection sometimes outweighs ones intent to follow common sense!
I shall as you say conserve it not destroy it
Doug
| Attila 氏の書き込み: |
| DON'T CLEAN use it and enjoy! Store right, low humidity, allow to light throw (uv filter on front) and fungus will not grow ever. Cleaning need only if fungus covered all over lens surface. All cleaning is a risk on lens safety especially if you don't have practice and use less if fungus spot is small like this. |
_________________ Lenses and cameras:
Amateurs worry about equipment
Pros worry about money,
Masters worry about light. |
|
| トップへ戻る |
|
 |
Attila
 登録日: 2007年2月24日 投稿: 58002
Expire: 2025-11-18
|
 投稿日時: 木 8月 12, 2010 5:56 pm 件名: |
|
 投稿日時: 木 8月 12, 2010 5:56 pm 件名: |
|
|
Attila wrote:
I use UV filters as transparent lens caps in storage. |
|
| トップへ戻る |
|
 |
biggles3
 登録日: 2009年11月9日 投稿: 62 所在地: Crickhowell, Wales
|
 投稿日時: 土 8月 21, 2010 10:02 am 件名: |
|
 投稿日時: 土 8月 21, 2010 10:02 am 件名: |
|
|
biggles3 wrote:
Hi - if you need technical advice on fixing lenses and cameras, go to http://www.kyphoto.com/cgi-bin/forum/discus.cgi and search through their archives for info. If you can't find the guidance you seek, just ask a question. It's one of the best web resources for lens/camera repair that you can find...
| nemesis101 氏の書き込み: |
Still awaiting advice!
Anyone out there with experience of this lens in use, or dismantling one?
PLEASE?
Doug |
_________________ Contax RTS/Zeiss lens fan and constant user along with my Mamiya RZ67 ProII. Favourite lens: Zeiss Planar 55 f1.2. |
|
| トップへ戻る |
|
 |
nemesis101
 登録日: 2008年3月25日 投稿: 2050 所在地: Oregon USA
Expire: 2015-01-22
|
 投稿日時: 土 8月 21, 2010 8:09 pm 件名: |
|
 投稿日時: 土 8月 21, 2010 8:09 pm 件名: |
|
|
nemesis101 wrote:
Thanks Biggles..
OMG Fokker triplanes at 3 o'clock..
going into cloud...
dammit the Camel's cut out...
Algy..? Biggles...? .
Thanks, really...
Doug
| biggles3 氏の書き込み: |
Hi - if you need technical advice on fixing lenses and cameras, go to http://www.kyphoto.com/cgi-bin/forum/discus.cgi and search through their archives for info. If you can't find the guidance you seek, just ask a question. It's one of the best web resources for lens/camera repair that you can find...
| nemesis101 氏の書き込み: |
Still awaiting advice!
Anyone out there with experience of this lens in use, or dismantling one?
PLEASE?
Doug |
|
_________________ Lenses and cameras:
Amateurs worry about equipment
Pros worry about money,
Masters worry about light. |
|
| トップへ戻る |
|
 |
biggles3
 登録日: 2009年11月9日 投稿: 62 所在地: Crickhowell, Wales
|
 投稿日時: 日 8月 22, 2010 10:28 am 件名: |
|
 投稿日時: 日 8月 22, 2010 10:28 am 件名: |
|
|
biggles3 wrote:
Tally Ho Doug!
Just for your interest, here's a useful guide using a Zeiss 50 1.7 that'll give you an idea of what to expect if you decide to risk dismantling the Yashica: http://www.monopix.co.uk/zeiss50mm.shtml
I've taken a couple of my Zeiss Planars apart to fix issues but have yet to have a go at my Yashi MLs. I bought a couple of 55 1.2 MLs last week - one's perfect and the other is optically perfect but the aperture blades are oiled and stick so I'm contemplating removing the front lens assembly in the hope that I can clean the blades they should reveal...
Your only issue - apart from not introducing dust - is whether the glass elements in the front which need attention are glued - if the fungal filaments are between such elements then forget it. Believe it or not, if you do get the glass apart, the best thing to remove light fungal infection is Pond's cold cream. Works a treat!
And I'm delighted to come across another 4/3 enthusiast - I use an E-3 and delight in using the Zeiss 55 1.2 and 85 1.2 lenses - imagine how much you'd have to pay to get a 170mm f1.2 lens made by Zeiss! Not much change from $150,000 (and at least two thirds up front) - I asked!
Cheers from wet Wales to sunny Oregon.
 _________________ Contax RTS/Zeiss lens fan and constant user along with my Mamiya RZ67 ProII. Favourite lens: Zeiss Planar 55 f1.2. |
|
| トップへ戻る |
|
 |
nemesis101
 登録日: 2008年3月25日 投稿: 2050 所在地: Oregon USA
Expire: 2015-01-22
|
 投稿日時: 日 8月 22, 2010 7:33 pm 件名: |
|
 投稿日時: 日 8月 22, 2010 7:33 pm 件名: |
|
|
nemesis101 wrote:
I am sorry
I thought i was bad (with over 150 cameras and even more lenses) but whereas my case is acute, yours (from the pics of the Contax hoard) is, sadly terminal...
I have taken a lot of lenses apart in the past - and hey - even put some back together.. and yes used Pond's as well (and not for that radiant softer skin sheen either) it was the specifics of the 50mm ML that I was after - like how, and are there any booby-trap springs that would want to leap out at my eyes...
Yes I am a 4/3 person (E-1, Panny L-1 and now a E-620) also 35mm (only 5 Contax bodies and none are medium format) though I do now have 27 yashica bodies in 35mm and medium format.. and 21 Pentaxes, and 7 Mirandas and 4 Rolleis and .. well 'nuff said? lol
As for sunny Oregon - it was, and now it's.. not!
Mid-week is meant to hit 90+ F.. it's been a roller-coaster.. 60 - 90 - 60 for the past few weeks.
As for Wales.. know it only too well.. indeed when at school (with Tom Brown I fear) I walked with a friend from the South Coast up through the centre and then over to Aberistwyth where I got a train back to the east.. It was only later that I realised I had been happily walking across hillsides littered with unparked mineshafts! Hmm
So hi from overcast Portland!
Doug
PS I have been up in a Sopwith and an SE series too...
| biggles3 氏の書き込み: |
Tally Ho Doug!
Just for your interest, here's a useful guide using a Zeiss 50 1.7 that'll give you an idea of what to expect if you decide to risk dismantling the Yashica: http://www.monopix.co.uk/zeiss50mm.shtml
I've taken a couple of my Zeiss Planars apart to fix issues but have yet to have a go at my Yashi MLs. I bought a couple of 55 1.2 MLs last week - one's perfect and the other is optically perfect but the aperture blades are oiled and stick so I'm contemplating removing the front lens assembly in the hope that I can clean the blades they should reveal...
Your only issue - apart from not introducing dust - is whether the glass elements in the front which need attention are glued - if the fungal filaments are between such elements then forget it. Believe it or not, if you do get the glass apart, the best thing to remove light fungal infection is Pond's cold cream. Works a treat!
And I'm delighted to come across another 4/3 enthusiast - I use an E-3 and delight in using the Zeiss 55 1.2 and 85 1.2 lenses - imagine how much you'd have to pay to get a 170mm f1.2 lens made by Zeiss! Not much change from $150,000 (and at least two thirds up front) - I asked!
Cheers from wet Wales to sunny Oregon.
 |
_________________ Lenses and cameras:
Amateurs worry about equipment
Pros worry about money,
Masters worry about light. |
|
| トップへ戻る |
|
 |
|
|
|
このフォーラムでは新しいトピックを投稿できません このフォーラムではトピックに返信できません このフォーラムでは自分の投稿を編集できません このフォーラムでは自分の投稿を削除できません このフォーラムでは投票に参加できません
|